Categories

Best Special Machining

A36 Hot Rolled Carbon Steel Rectangular Tubing - 2' x 3' x .125' x 72'

  • A36 carbon steel is a structural steel that has better formability than 1018 carbon steel.
  • Hot rolled to attain the specified dimensions.
  • Excellent for Welding, Drilling, Machining, Sawing and Forming by means of machine or special fixture..
Check Stock

Mobil 100545 Vactra No.4 Way Oil 1 gal

  • Excellent Metal Wetting & Adhesiveness - Prevents separation of lubricant from machining surfaces.
  • Improved Frictional Properties - Eliminates stick slip and enables accurate machining.
  • Improves Chatter and Scoring - Enables consistant machining operations.
  • Compatible with Multiple Materials - Suitable for wide range of materials.
  • Superior Rust and Corrosion Protection - Enables reduction of sliding surface deterioration.
Check Stock

ATOPLEE 1pc Metric HSS 6542 Left Hand Thread Tap (M16x2.0)

  • {High Quality Material} The tap is made of HSS6542 material, which is stronger and more durable than ordinary taps..
  • {Size}Total Length:101mm,Shank Diameter:12mm,Pitch:2mm..
  • {Note}This is a small straight groove tap, which can be used for tapping of round through holes or shallow blind holes. Pay special attention to not being used for blind hole tapping..
  • {Widely Usage}Tapping can be done on stainless steel, iron, aluminum, copper, general steel and other materials. It can be used with manual equipment or special processing consoles, such as tapping machine, driller's integrated bench drill, CNC numerical control lathe, machining center, etc..
  • {Package Included} 1x Left hand Thread Tap.
Check Stock

3PCS BAP300R C10-10-120-1T/C12-12-130-1T/C12-13-130-1T 1Flute Indexable End Milling Holder+ 6PCS APMT1135PDER CNC Inserts+3PCS T8 Wrench (3PCS 300R End Milling Holder)

  • * Package includes ：1PCS 300R C10-10-120-1T +1PCS 300R C12-12-130-1T+1PCS 300R C12-13-130-1T+ 6PCS APMT1135PDER + 3PCS T8 wrench. If you need more APMT1135PDER, please search ASIN：B097RG372M..
  • * High performance replaceable inserts, anti-seismic high-quality alloy steel, can effectively suppress vibration..
  • * It is suitable for rough machining, finish machining, digging machining, groove machining and cutting machining..
  • * The screw offset fastening design makes the inserts and groove closely combined, enhances the rigidity, and the processing effect will be better..
  • * The handle strictly abides by the process of first vacuum quenching and then tapping to avoid the deformation caused by first tapping and then quenching. It is firm and durable and can prolong the service life..
Check Stock

SMSL Audio Sap-VI black Headphone Amplifier Black

  • sAp VI is special designed for computer ,DVD, HD Player and MP3 etc, which can not develop headphone amp function due to their small output power..
  • 2 way switch input circuit 35 earphone seat and the RCA block Replacement of the input signal is no longer need to pull line just select the switch....
  • sAp VI shell using the aluminum material CNC high precision machining drawing oxidation treatment.
Check Stock

HTD 3M 150-5100 Close Loop Timing Synchronous Belt 10/15/20mm Width 3mm Pitch

  • Specifications: 4M11T, outer diameter: 52mm, inner hole: rough machining.
  • Specifications: 4M13T, outer diameter: 60mm, hole: rough machining.
  • Specifications: 4M15T, outer diameter: 68mm, hole: rough machining.
  • Fast Shipping Guarantee: All parcel will be delivered in 7-15 days.
Check Stock

Zouzmin Carbide Insert APGT1135PDFR-G2 Milling Insert for Aluminum Alloy (APGT1135PDFR-G2)

  • Machining: Copper And Aluminum Medium Finish Machining.
  • Allows Faster Machining And Leaves Better Finished on Metal Parts, Reduce the Downtime Required to Change Edges and Easily to be Replaced..
Check Stock

Amerock Full Inset Partial Wrap Free Swinging Minaret Tip Hinge for 3/4\ Doors Oil Rubbed Bronze Single (1)

  • Use bit (AWM5R) for the door machining and (AWM5AJ) for the face frame machining.
Check Stock

TRIM MicroSol 455 Low-Foam Semisynthetic Microemulsion Coolant 1-Gallon jug MS455/1

  • Low foaming for today's demanding high-pressure, high-volume applications.
  • Also for machining some aluminum alloys and nonferrous metals.
  • Provides superior corrosion inhibition on cast iron and eliminates hot chip" and clinkering problems".
  • Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance.
  • Requires no special disposal or recycling.
Check Stock

VMTW 8X1 CBN Grinding Wheel 180 Grit 1/4 inch side face for High Speed Steel

  • Straight diamond grinding wheel used for machining of conical, cylindrical and flat surface, cylindrical and conical apertures. Machining of cylindrical surfaces parts and surface ends at one set-up. Machining of recesses and slots of carbide stamps. Sharpening and finishing of carbide tools..
Check Stock

Amerock Full Inset Full Wrap Free Swinging Minaret Tip Hinge for 3/4\ Doors Oil Rubbed Bronze Single (1)

  • Full 3 way adjustment with one screw to easily adjust a warped door or a twisted cabinet problem.
  • Frame and door machining required - Great for upgrading old hinges without having to make new doors.
  • Use bit (AWM5R) for the door machining and (AWM5AJ) for the face frame machining.
Check Stock

Amerock cm2335ae-XCP5 Non Self-Closing Butt Hinges for Door Hardware 2\ - Pack of 5

  • Full 3 way adjustment with one screw to easily adjust a warped door or a twisted cabinet problem.
  • Frame and door machining required - Great for upgrading old hinges without having to make new doors.
  • Use bit (AWM5R) for the door machining and (AWM5AJ) for the face frame machining.
Check Stock

Amerock CM7128G10 Self-Closing Face Mount Hinge, 3/8 Inch Inset, Satin Nickel (Sold per Piece)

  • Full 3 way adjustment with one screw to easily adjust a warped door or a twisted cabinet problem.
  • Frame and door machining required - Great for upgrading old hinges without having to make new doors.
  • Use bit (AWM5R) for the door machining and (AWM5AJ) for the face frame machining.
Check Stock