Categories

Best Special Material Pcb

4X Prototype PCB for Arduino Mega 2560 R3 Shield Board DIY

  • Prototype PCB for Arduino Mega 2560 R3 Shield Board DIY..
  • PCB Dimension: 101.6mm x 53.34mm / 4" x 2.1".
  • PCB Thickness: 1.6mm / 0.063", Material: high quality FR-4 glass fiber PCB..
  • All holes are plated through. Top and bottom side are identical copper layers. Pads grid (pitch) 2.54mm / 0.1", hole diameter 0.9mm..
Check Stock

Aoicrie MKS Gen L V1.0 3D Printer Integrated Mainboard Controller PCB Board Compatible Ramps1.4/Mega2560 R3 with A4988 Motor Driver for 3D

  • Integrate 2560 and Ramps1.4 one PCB,which designed to avoid complicated connections, easier wiring and more stable Use high-quality 4 layer PCB&Use special power chip,support 12V-24V, also Use Run Marlin firmware,same as configuration way as Ramps1.4, it can replace Ramps1.4 directly..
  • Use high quality MOSFET tube,better cooling and more stable.Use special power chip,support 12-24V input,reduce the heated bed current to 1/4 that slove the Mosfet heat problem efficiently and power shortage..
  • Support a variety of stepper drivers: A4988,DRV8825,TMC2208 and TMC2100, and available to work with LCD2004,LCD12864,MKS TFT24/28/32/35 & Available to connect external large stepp drivers, A4988 driver board widely used in 3D printers and small CNC machines..
  • Support functions: Non-trace resumption after power off, run out filament ,and auto shut down, XTZ axis with different color terminal controls the motors and end stop,which is convenient to wire.Use high-quality 4 layer PCB&Use special power chip.Retail Servos,AUX-1 and AUX-2 interface of Ramps1.4 provide three 5V output and three 12V output interfaces..
  • Five different step resolutions: full-step, half-step, quarter-step, eighth-step, and sixteenth-step.Adjustable current control lets you set the maximum current ....
Check Stock

Zorveiio 50 Pcs PCB Board Mounting Feet with Screws, PCB Spacer Kit PCB Feet Plastic PCB Standoffs for Arcade Gaming Board Console Motherboard

  • 【Premium Material】Our pcb board mounting feet are made of high quality insulating plastics, which is sturdy, strong enough and durable in use. Such reliable plastic spacer can stay firmly on PCB Board, good insulation with long service life..
  • 【Pacakge & Suitable Size】 You will receive 50pcs L type pcb feet and 100pcs mounting screws (Each foot comes with 2 pieces screws). Each pcb standoff measures approx. 0.8" x 0.8"/21.2mm x 20.3mm, can secure the board tightly. Sufficient enough for you to satisfy using and replacing daily needs..
  • 【Widely Usage】Our plastic pcb feet are suitable for PCB packaging and stacking applications. Specially for fixing gaming boards, game console motherboard, video board, arcade gaming board ect and work well. Serve as ideal replacement hardware parts and offer you much convenience in your daily life..
  • 【Easy to install】 These pcb spacer kit is easy to install and use, you just need to tighten mounting screws in a breeze, will not need a lot of labor. It can secure the circuit board to other surfaces effortlessly..
  • 【100% Risk-Free Shopping】 Zorveiio's products are backed by incredible customer service to make sure your satisfaction is guaranteed. If you have any other questions about it, please do not hesitat....
Check Stock

Delay-1 DIY Guitar Pedal Kit With 1590B Aluminum Metal Stomp Box Case Enclosure

  • 1.This Kit is super easy to build and very rewarding.
  • 2.The PCB is designed to fit perfectly inside the pre- drilled 1590B enclosure(included).
  • 3.Our PCB is a double-side welding high-quality and professionally designed and produced PCB board.
Check Stock

RunJRX Eva Keyboard PCB Foam 108 Layout,Poron Switch Pads 120Pcs and Keyboard Sound Dampeners for Custom Keyboard (RJ-146)

  • 【EVA MATERIAL】High density, micro-fine and homogeneous cell structure with excellent resistance to compression deformation. Widely used for sealing and vibration damping of components in communications, computers and household appliances..
  • 【SWITCH PADS】It is a new project to update the keyboard by filling the gap between the switch and the pcb, reducing vibrations and typing sounds, keep the typing feel consistent.We customize the bottom of the material has a layer of film plus non-stick adhesive backing will be more resistant to tearing, support repeatedly tear off and then stick on..
  • 【KEYBOARD PCB FOAM】Modular design fits 108 Layout, no need to cut, easy to install. It is a new project to update the keyboard by filling the gap between the pcb and the positioning board, reducing vibrations and typing sounds..
  • 【USEFUL TOOLS】We prepar a plastic prying bar to help you dismantling your keyboard.Tweezers to help you put the switch pads..
  • 【PACKAGE INCLUDES】EVA Keyboard Pcb Foam 108 Layout x 1, Poron Switch Pads x 120, Plastic Prying Bar x 1, Tweezers x 1..
Check Stock

Keyboard Switch Sound Dampeners Sheet Silencer Foam Silencer Pad for Mechanical Keyboard（96 Layout）

  • 【Product Function】 Using this product can eliminate the cavity sound of the keyboard, increase the thickness of the tone, and reduce the resonance....
  • 【Easy Installation 】Install directly between PCB and steel plate without adhesive. And will not affect the light position of the keyboard..
  • 【Material】Made of soft sponge material, with high-efficiency noise reduction effect, and will not damage your PCB board..
  • 【3mm Thickness】Because the distance between the PCB and the positioning board is between 3mm and 3.5mm, this 3mm silencer pad is the best choice....
  • 【Warm Tips】This silencer pad is drawn based on the actual measurement of the keyboard. It is not manufactured by the original factory and cannot....
Check Stock

FDSF USB 3.1 Type C to Type C Extension Cable 90 Degree FPC FPV Ribbon Flat USB C Cable 3A 10Gbps EMI Shielding, 30cm

  • The PCB is made of high-quality materials with high frequency and low resistance. The PCB is made of precision. The PCB uses high TG plates. The thickness of the copper material is thickened to 1oz. The PCB power circuit is strengthened and the use of 2 5V power core wires is strengthened, so that the transmission current is more powerful. Support up to 3A..
  • The differential signal has no via hole design, the signal is pure, there is no signal attenuation interference problem of parasitic capacitance and parasitic inductance, and there is no CAF short circuit phenomenon, and the product is durable..
  • Product application: GPS navigator, storage device, imaging device, for Pi 4 for MCU development board, built-in USB device to extend the use of , convenient for USB power supply and USB signal transmission of SLR handheld pan/tilt, etc..
  • Cable length Description: The length of the wire refers to the part of the visible wire. It does not include the PCB and the connector..
Check Stock

SUPERNIGHT LED Strip Lights 16.4FT 5M SMD 5050 Waterproof 300LEDs RGB Color Changing Flexible LED Light Strip

  • 【SMD 5050 LED Rope Lights】There are RGB color leds on 16.4ft flexible PCB board. You can control the rgb led tape color like as red/ green/ blue/....
  • 【IP65 Waterproof PCB】This 5M RGB length flexible strip is waterproof(IP65),indoor use only. The polyester resin material covering the PCB to....
  • 【Cuttable and Joinable】Please find the scissor mark, then you can cut the strip as you request.
  • Also you can use other strip tools to connect more....
  • 【With Adhesive Tape】On the back of PCB,there is double-side adhesive tape which can help you install it easier.(PS：Only one rgb led tape in the....
  • 【Perfect home decorations】You can install led tape lighting, under cabinet lighting, Car led lighting, Indirect lighting in crown molding, Tv Back....
Check Stock

Dji F550 Flame Wheel Arf Kit

  • Ultrastrength Material Frame Arms adopt PA66+30GF ultrastrength material design, providing better crashworthiness.
  • Attractive Frame Arms Provide different color frame arms: red, white, black, which makes your flight more colorful..
  • Integrated PCB Wiring The use of high strength compound PCB frame board, makes wiring of ESCs and battery safer and easier.
  • Huge Assembly Space Optimized frame design, which provides abundant assembly space for autopilot systems..
Check Stock

Dashtop 40 pcs L Type PCB Mounting feet / legs with Screw Fit for Arcade Games Jamma Game Video Games Windows System Raspberry Pi Board

  • MATERIAL: PCB standoffs are made of insulating plastics, strong and durable in use..
  • SIZE: The size of insulated PCB spacer – 20 x 20 x 9mm / 0.8 x 0.8 x 0.35in (LxWxH). Supporting Height: 20mm / 0.8 inch.
  • TWO SCREWS HOLES: Each L type PCB board mounting feet comes with 2 screws to secure the circuit board to other surfaces easily.
  • APPLICATIONS: Circuit Board Standoffs suit for game console motherboard, video board, and so on, serve as ideal replacement parts and provide you much....
  • Apply for: our L type PCB board mounting feet with screws fit well with arcade gaming board, video board and so on, serve as ideal replacement parts....
Check Stock

IDE to SATA Adapter, Upgrade PCB Hard Drive or Optical Drive Adapter Converter Kit for Sony PS2, IDE Original Network Adapter for Game, Purple

  • ★★【SPECIFICATION】❶Item Type: Adapter❷Material: for PCB❸Color: Purple❹Weight: Approx. 13.0g/0.5oz❺Application: Sony PS2 IDE original network adapter..
  • ★★【SUITABLE FOR SONY PS2】Precise cut, perfect fitness, suitable for Sony PS2 IDE original network adapter..
  • ★★【SATA HARD DISK】A large‑capacity for sata hard disk is used to replace the IDE hard disk to play the game, which will save us a lot of game loading time..
  • ★★【PCB BOARD MATERIAL】High‑quality for PCB board material, with fast operation speed and excellent performance..
  • ★★【EASY TO INSTALL】Equipped with mounting screw pack, which makes it easy to install and detach.Small and lightweight, convenient for us to storage and a good replcement accessory..
Check Stock

HiLetgo 1602 LCD Keypad Shield 1602 LCD Expansion Shield Board Blue Backlight 4.5-5.5V for Arduino Duemilanove Robot

  • ☆ Premium Quality: Made of premium material, this lcd module display is sturdy, not easy to aging and abrasion resistant, to ensure maximum strength and durability for long lasting usage.
  • ☆ TFT LCD Serial Port Module : The lcd display module is a new 2.8 inch serial SPI color display module. Designed with one socket for sd card and PCB adapter for LCD.
  • ☆ Come With PCB Plate: With PCB plate (including power supply IC, SD), pcb display module is compatible with 5110 interface. Resolution: 128x160.
  • ☆ Support Analog & Hardware SPI: This tft display module supports analog SPI and hardware SPI, less I/O port need. It can be driven by 8051 / AVR / PIC /ARM/STM32. It can be driven with at least four IO.
  • ☆ What You Will Get: If you need the document to download, please contact us. We stand behind all of our them with a 100% product guarantee and promise to give you the best in customer care.
Check Stock

Cermant 3-Pin 5.08mm Pitch Male Female Plug-in PCB Screw Terminal Block Connector (5.08mm-3P-20Set)

  • Pin Number : 3 Pin Distance : 5.08mm/0.2"..
  • These PCB screws are snap together well.have a quick release capability.Just need to loosen the screws to land the wires.Use high-quality plastic PA66 high temperature resistant V0 flame retardant,steel screw environmentally friendly electroplating,no slippage.Widely used in electronics,communication equipment,instruments.
  • Package Content: 20 Set x PCB Terminal Block Connector.
Check Stock