Best Spectrum Analyzers - TopShopReview.com

Assembly Language Using the Raspberry Pi: A Hardware Software Bridge

VSWR Bridge with VSWR-DSA800, VSWR-DSA1000 licenses included Frequency range: 1 MHz - 3.2 GHz, Typical Directivity: 30 dB.
For DSA815-TG, DSA815, DSA832E-TG, DSA832E, DSA832-TG and DSA832.
Used together with Rigol DSA series spectrum analyzers with tracking generators to make S11 measurements.
The VSWR bridge connects directly onto the front of Rigol DSA series spectrum analyzers with tracking generators to improve the test accuracy and to avoid the need for cables.

Check Stock

Tracking Source Rf Generator 35-4400mhz Portable Spectrum Analyzer Spectrum Sweep Signal，Handheld Spectrum Analyzer Rf Power Meter W Software USB Convenient for Factory Electronic

【Abrasion Resistance 】The shell of this portable spectrum analyzer is made of high-quality aluminum alloy, which is corrosion-resistant and....
【Professional manufacture 】 Ensures you higher quality products, you can buy it with ease..
【High efficiency】This signal generator has a large input power, which can greatly improve work efficiency..
【Wider scope 】 The high‑accuracy frequency and high acceptance range of the power meter greatly increase the scope of application.The signal....
【Note】If you need the Software of this handheld spectrum analyzers,please be free to contust us .We will reply in 4-6 hours..

Check Stock

Portable tinySA Spectrum Analyzer - AURSINC Handheld Frequency Analyzer V0.3.1 with Antenna SMA Male to UHF Female Cables & 30db Attenuator MF | HF | VHF UHF Input for 0.1MHZ-960MHz 2.8'' Touchscreen

...des are installed which will be more stable and sensitive with higher antistatic level and longer service life. NOTE: Due to the old inventory might mix with the new batch, and If you got the old version Tiny spectrum analyzer and want a new one, you could apply a replacement for it..
[Frequency Range] Spectrum analyzers like the Tiny spectrum analyzer use a resolution filter that is used to isolate the input power in a small frequency range. This resolution filter is swept across the desired frequency range. The fastest scanning speed occurs with an RBW or 300kHz or wider and is about 2 scans per second. But with increase of the frequency span and decrease of the RBW the scanning speed decreases quickly. A scan from 0MHz to 350MHz with an RBW of 10kHz takes about 2 minutes..
[2 in 1 Device] When not used as Spectrum Analyzer it can be used as Signal Generator, MF/HF/VHF sinus output between 0.1MHZ-350MHz, UHF square wave output between 240MHz-960MHz. Built-in calibration signal generator that is used for automatic self test and low input calibration. The Tiny spectrum analyzer contains all the components of a conventional heterodyne swept spectrum analyzer. Color display showing 290 scan points covering up to the full low or high frequency range.

Check Stock

Portable TinySA Spectrum Analyzer, SEESII Upgraded V0.3.1 Tiny Frequency Analyzer with Antenna SMA Male to UHF Female Cables, 100kHz to 960MHz MF/HF/VHF UHF Input, 2.8'' Touchscreen Signal Generator

...-in Calibration Signal Generator】When not used as Spectrum Analyzer it can be used as Signal Generator, MF/HF/VHF sinus output between 0.1MHZ-350MHz, UHF square wave output between 240MHz-960MHz. Built-in calibration signal generator that is used for automatic self test and low input calibration..
【Tiny Spectrum analyzers】Switchable resolution bandpass filters for both ranges between 2.6kHz and 640kHz.Color display showing 290 scan points covering up to the full low or high frequency range. Bulit-in rechargeable battery allowing a minimum of at least 2 hours portable use..
【PC Control】Connected to a PC via USB it becomes a PC controlled Spectrum Analyzer.The USB interface implements the Serial over USB (CDC) protocol and there is a large set of commands that can be invoked over the serial interface. These command can be used to perform measurements or update internal settings. The driver for Windows will install automatically after connecting to a Windows PC. The driver for Linux is built into the kernel..
【Package List】1x Tiny Spectrum Analyzer.
1 x SMA Telescopic Antenna.It's very useful as an antenna analyzer for your ....

Check Stock

Portable TinySA Spectrum Analyzer,SEESII Upgraded V0.3.1 Handheld Tiny Frequency Analyzer 100kHz to 960MHz MF/HF/VHF UHF Input,Signal Generator with 2.8 inch Touch Screen with ESD Protect Function

...-in Calibration Signal Generator】When not used as Spectrum Analyzer it can be used as Signal Generator, MF/HF/VHF sinus output between 0.1MHZ-350MHz, UHF square wave output between 240MHz-960MHz. Built-in calibration signal generator that is used for automatic self test and low input calibration..
【Tiny Spectrum analyzers & ESD Function】Switchable resolution bandpass filters for both ranges between 2.6kHz and 640kHz.Color display showing 290 scan points covering up to the full low or high frequency range. Bulit-in rechargeable battery allowing a minimum of at least 2 hours portable use.The performance of the 2021 latest version 3.1 will be more stable and sensitive, with a new ESD protrcted function enable the product to have a higher antistatic level and a longer service life..
【PC Control】Connected to a PC via USB it becomes a PC controlled Spectrum Analyzer.The USB interface implements the Serial over USB (CDC) protocol and there is a large set of commands that can be invoked over the serial interface. These command can be used to perform measurements or update internal settings. The driver for Windows will install automatically after connecting to a Windows PC. The driver for Linux is built into the kernel..

Check Stock

Portable tinySA Spectrum Analyzer - AURSINC Hand Held Frequency Analyzer 2021 Upgraded V0.3.1 | 100kHz to 960MHz MF/HF/VHF UHF Input | ESD Protected Function & 2.8 inch Touchscreen | Signal Generator

...e more stable and sensitive with higher antistatic level and longer service life. Spectrum Analyzer with two inputs, high quality MF/HF/VHF input for 0.1MHZ-350MHz, lesser quality UHF input for 240MHz-960MHz. Switchable resolution bandpass filters for both ranges between 2.6kHz and 640kHz.
[Frequency Range] Spectrum analyzers like the tinySA use a resolution filter that is used to isolate the input power in a small frequency range. This resolution filter is swept across the desired frequency range. The fastest scanning speed occurs with an RBW or 300kHz or wider and is about 2 scans per second. But with increase of the frequency span and decrease of the RBW the scanning speed decreases quickly. A scan from 0MHz to 350MHz with an RBW of 10kHz takes about 2 minutes..
[2 in 1 Device] When not used as Spectrum Analyzer it can be used as Signal Generator, MF/HF/VHF sinus output between 0.1MHZ-350MHz, UHF square wave output between 240MHz-960MHz. Built-in calibration signal generator that is used for automatic self test and low input calibration. The tinySA contains all the components of a conventional heterodyne swept spectrum analyzer. Color display showing 290 scan points covering up to the full low or high frequency range.

Check Stock

AREOTEK 4000mAh Battery Compatible with Fluke BP190 BP-190 B11432 Scopemeter 192 192B 196 196B 196C 199 199B 199C 215 215C 225 225C Analyzer 433 434 435 Rohde&Schwarz FSH3 FSH3TV

Compatible Model: FLUKE Analyzers 433,Analyzers 434,Analyzers 435,Scopemeter 192,Scopemeter 192B,Scopemeter 196,Scopemeter 196B,Scopemeter 196C,Scopemeter 199,Scopemeter 199B,Scopemeter 199C.
Brand new Fluke ScopeMeter battery replacement, Compatible Battery Part Number: FLUKE B11432,BP190,BP-190.
Please ensure both model and battery part number are matched with your device..
Rechargeable NiMH battery pack, Voltage: 7.2V, Capacity: 4000mAh.

Check Stock

Dyn-A-Med Glass Circle Fiber Pad, For Moisture Balance Analyzers, 9cm Diameter (Case of 4000)

Non-hydrophilic, binder-free glass fiber pads for moisture analyzers.
Conveniently hold liquid or semi-solids for moisture analysis and determination.
Most commonly used in infrared or microwave analyzers.

Check Stock