FK Rod Ends COM10 COM Commercial Series Spherical Bearing B Dia (Bore): .6250 D

  • 2pcs GE10C Spherical Plain Radial Bearing.
Check Stock

uxcell PHSB8 Rod End Bearing 1/2-inch Bore Pre-Lubricated Bearing 1/2-20 Female Thread Right Hand

  • Type: 1/2" Hole x 1/2-20 right-hand female thread rod end. Maximum angular misalignment: 9 Degree..
  • Material: The #45 steel spherical rod end body and hardened bearing steel ball joint ensure long service life..
  • Capacity: 19KN Static Load Capacity, 15KN Dynamic Load Capacity..
  • Features: Large load rating, low noise, anti-corrosion, tough, and durable..
  • Application: Widely used in engineering hydraulic cylinders, forging machine tools, automation equipment, and so on..
Check Stock

uxcell POSB8 Rod End Bearing 1/2-inch Bore Pre-Lubricated Bearing 1/2-20 Male Thread Right Hand

  • Type: 1/2" Bore x 1/2-20 right-hand male thread rod end. Maximum angular misalignment: 9 Degree..
  • Material: The #45 steel spherical rod end body and hardened bearing steel ball joint ensures long service life..
  • Capacity: 19KN Static Load Capacity, 15KN Dynamic Load Capacity..
  • Features: Large load rating, low noise, anti-corrosion, tough, and durable..
  • Application: Widely used in engineering hydraulic cylinders, forging machine tools, automation equipment, and so on..
Check Stock

uxcell PHSB6 Rod End Bearing 3/8-inch Bore Pre-Lubricated Bearing 3/8-24 Female Thread Right Hand

  • Type: 3/8" Bore x 3/8-24 right-hand female thread rod end. Maximum angular misalignment: 9 Degree..
  • Material: The #45 steel spherical rod end body and hardened bearing steel ball joint ensures long service life..
  • Capacity: 10KN Static Load Capacity, 9.4KN Dynamic Load Capacity..
  • Features: Large load rating, low noise, anti-corrosion, tough, and durable..
  • Application: Widely used in engineering hydraulic cylinders, forging machine tools, automation equipment, and so on..
Check Stock

uxcell PHSB6 Rod End Bearings 3/8-inch Bore Pre-Lubricated Bearings 3/8-24 Female Thread Right Hand 2pcs

  • Type: 3/8" Bore x 3/8-24 right-hand female thread rod end. Maximum angular misalignment: 9 Degree..
  • Material: The #45 steel spherical rod end body and hardened bearing steel ball joint ensures long service life..
  • Capacity: 10KN Static Load Capacity, 9.4KN Dynamic Load Capacity..
  • Features: Large load rating, low noise, anti-corrosion, tough, and durable..
  • Application: Widely used in engineering hydraulic cylinders, forging machine tools, automation equipment, and so on..
Check Stock

uxcell PHSB6 Rod End Bearings 3/8-inch Bore Pre-Lubricated Bearings 3/8-24 Female Thread Left Hand 2pcs

  • Type: 3/8" Bore x 3/8-24 left-hand female thread rod end. Maximum angular misalignment: 9 Degree..
  • Material: The #45 steel spherical rod end body and hardened bearing steel ball joint ensures long service life..
  • Capacity: 10KN Static Load Capacity, 9.4KN Dynamic Load Capacity..
  • Features: Large load rating, low noise, anti-corrosion, tough, and durable..
  • Application: Widely used in engineering hydraulic cylinders, forging machine tools, automation equipment, and so on..
Check Stock

uxcell POSB4 Rod End Bearings 1/4-inch Bore Pre-Lubricated Bearings 1/4-28 Male Thread Right Hand 2pcs

  • Type: 1/4" Bore x 1/4-28 right-hand male thread rod end. Maximum angular misalignment: 13 Degree..
  • Material: The #45 steel spherical rod end body and hardened bearing steel ball joint ensures long service life..
  • Capacity: 6.6KN Static Load Capacity, 4.5KN Dynamic Load Capacity..
  • Features: Large load rating, low noise, anti-corrosion, tough, and durable..
  • Application: Widely used in engineering hydraulic cylinders, forging machine tools, automation equipment, and so on..
Check Stock

Bailey SA Series Bearing Insert - Radial Insert Ball Bearing for High Speed Applications - Ball Bearing Steel Insert - Spherical OD Eccentric Collar - 1” ID, 2.0472” OD, Steel, 2.56 Ounces, 150854

  • SPECIFICATIONS: Our SA series radial insert ball bearings for agricultural equipment come with an eccentric shroud sleeve, have 1” inner diameter, 2.0472” outer diameter, and are made of steel. The bearing insert weighs 2.56 ounces..
  • PRECISE: The bearing bushing has an eccentric collar that allows high-speed shafts to perform eccentric functions without an eccentric axis. This eccentric bearing offers precision and efficiency in rugged agricultural applications..
  • PROTECTIVE: The eccentric locking collar in the peer bearing can handle a high degree of vibration. These collar bearings protect machinery against damage caused by vibration. These are also double sealed to reduce harm from fibers..
  • STURDY: This independent plain bearing 1 in. id is made from high-quality steel, with precision-hardened inner rings for added strength. It has a high shock absorption capacity and does not crack under pressure. Our bearing collar is made to last..
  • CONVENIENT: These sealed regreasable spherical bearings are simple to use, efficient in operation, and extremely convenient. They are useful in a number of high-speed, high-vibration applications and can be used in rugged conditions with ease..
Check Stock

KME Precision Knife Sharpener System with 4 Gold Series Diamond Hones - Base Included

  • Newest KME Kit as of June 2015 with Base Included.
  • 4 Gold Series KME 1x4 diamond hones - 140 extra-coarse, 300 coarse, 600 fine and 1500 extra fine.
  • Spherical bearing rod guide for zero angle deviation and smooth sharpening motion.
  • Continuous angle adjustment from 17 to 30 degrees - marked in 1 degree increments.
  • Very portable - stores in included hard carry case..
Check Stock

VEVOR Double Acting Hydraulic Cylinder 2'' Bore, Top Link Hydraulic Cylinder 10'' Stroke, Retracted 18\ Extended 26 Hydraulic Side Link Swivel Eye Bearing w/Check Valve for Tractors, Category 1, 2

  • ...s built under specific dimensions. Bore: 2"-2.5". Stroke Length: 10". Rod Size: 1". Pin Size: 0.8". With retracted min length 20" and extended max length 28". Double Pilot Check Valve Port Size: G3/8. Max Pressure: 5076PSI. Max Flow Rate: 20 L/ min. Opening Pressure: 50.76 PSI..
  • Swivel Eye Bearing Design: There is a spherical swivel eye bearing design on both ends. Due to the sturdy and flexible bearings, you can quickly fix and install the cylinder on your tractors or min excavators. Joint Bearing Width: 2". Thickness 0.8". Durable enough to hold a lot of force..
  • With Check Valve & Fully Tested: The well-assembled and thoroughly tested tractor top link hydraulic cylinders also come with a double pilot operated check valve to help hold the cylinder and prevent drift. The assembled inside sealing rings guard the high performance of sealing, accessible maintains, and safer use..
  • Various Application: Our hydraulic top link cat cylinder is the ideal tool for various mobile equipment types in industries like wastes, recycling, constructions, transportations, agriculture, material handling, etc. It works excellently in tractors, excavators, and categories 1 and 2..
Check Stock

Genuine Ford Fluid XG-8-A PTFE Lubricant - 1 lb.

  • GreaseCo HeavyDuty Grease Tub Cartridge is a Lithium Complex Red And Tacky Grease for use in High Temperature EP Applications.
  • Excellent Tractor Grease, Wheel Bearing Grease, Automotive Grease, Ball Joint Grease, Hitch Ball Grease, Axle Grease, Trailer Wheel Grease, Tie Rod Grease, Bushings, Bobcat Lube Points, Chassis Lubrication, Electric Motors, Gears, Plain Bearings, Presses, Roller Bearings, Steering Knuckles, Trailers, Universal Joints, Winches, And Many More!.
  • An All Purpose Grease Tube for Automotive, Construction, Mining, Hauling & Trucking Sectors Due To It’s Enhanced High Temperature And Extreme Pressure Properties.
Check Stock

FAG 22215E1AK-M-C3 Spherical Roller Bearing, Tapered Bore, Brass Cage, C3 Clearance, Metric, 75mm ID, 130mm OD, 31mm Width, 6300rpm Maximum Rotational Speed, 236kN Static Load Capacity, 216kN Dynamic Load Capacity

Check Stock

Sealmaster CTMD 5 Rod End Bearing, Three Piece, Commercial, Self-Lubricating, Male Shank, Right Hand Thread, 5/16\-24 Shank Thread Size, 5/16\ Bore, ±7 degrees Misalignment Angle, 7/16\ Length Through Bore, 7/8\ Overall Head Width, 1.219\ Thread L...

  • Spherical rod end bearing for transferring motion between widely separated points.
  • Machined steel housing and male shank with right hand threads.
  • Delrin race and hardened, chrome-plated steel ball for resistance to galling and corrosion.
  • Maximum operating temperature of 150 degrees F (66 degrees C).
Check Stock