Categories

Best Spherical Plain Thrust Bearing

10 Sets Thrust Needle Roller Bearings with Washers 0.75 Inch Bore 1.25 Inch OD Industrial Bearing with Nice Load Carrying Capacity and Stiffness NTA1220 2TRA Thrust Needle Roller Bearing

  • Well made: the needle roller thrust bearing has fine workmanship and a nice stability, which can work well and operate efficiently.
  • Notes: it only bear axial load in one direction.
  • Package includes: you will receive 10 sets thrust needle roller bearings with washers, 3 pieces of each set, a total of 30 pieces, sufficient quantity to meet and satisfy your in daily life.
  • Reliable material: the thrust needle roller bearing is made of steel, has good heat tolerance under heavy load, reliable to use, which also has a nice load carrying capacity and stiffness, with a smooth surface, helping it work well.
  • Easy to use: featuring a steel cage guide rail and evenly distributed rollers, the thrust needle roller bearing take less space, reduce friction, vibration and noise, which is convenient to use.
  • It also can be applied as a raceway between the faces of adjacent machine components by combining 2 thrust washers.
  • Fit for: thrust bearing can be widely applicable in your daily life, such as minibike, agricultural machinery, conveying equipment, trailers, robots, elevators, rolling mills and so on.
Check Stock

10pcs 6700ZZ Thin Section Bearing Thin Wall Mini Ball Bearings Double Shielded 10x15X4mm

  • This A-Type, angular contact ball bearing is best suited to applications with high axial loads. This bearing also works well in radial or combined radial-thrust applications but should never be used alone to support moment loads or reversing axial loading..
  • Thoroughly coated in MIL-PRF-3150 or MIL-PRF-6085 oil and drained of excess and vacuum sealed in a plastic bag for shipping..
  • Manufactured to ABEC 1F precision tolerances related to the bearing bore, outer diameter, radial runout, axial runout and radial play..
  • Static Thrust Rating 970 pounds, Dynamic Thrust Rating 960 pounds.
  • This RBC thin section ball bearing can be advantageous in a design where space limitations, combined loading, or weight restrictions are proving to be challenging to overcome with a traditional ball bearing solution..
Check Stock

Mardatt 24 pcs 3 Type Thrust Needle Roller Bearings with Washers, AXK3552, AXK2035, AXK2542 Chromium Steel Rollers for Automobiles, Pump, Machine Tools

  • 【3 Size Thrust Needle Roller Bearing Assortment】You will get 9 pcs 20*35*2MM thrust needle roller bearings with washers, 9 pcs 25*42*2MM thrust needle roller bearings with washers, 6 pcs 35*52*2MMthrust needle roller bearings with washers, totally 24 pcs..
  • 【Premium Material】Made of chromium steel featured with a nice load carrying capacity and stiffness, high hardness, and high precision, smooth surface no residual burr that smooth to touch. Heat treatment process makes the bearing ball stronger, avoiding to deformed for a long time..
  • 【Feature】Needle Roller Thrust Bearings can accommodate axial loads in one direction only. Low noise and long service life, easy to maintain. Keep the bearing working environment clean and bearing lubricated in time..
  • 【Huge Function】Designed for low speed operation and axial loads only. Steel cage guides and evenly spaced rollers for reduced friction, vibration, and noise..
  • 【Wide Application】 Combined with 2 washers, make objects rotating smooth! Perfect for oven turntable, pump, rotating applications, motors, bikes, air conditioning, machine tools, automobiles, ect..
Check Stock

General Motors 12643668, Engine Crankshaft Thrust Washer

  • Thrust washers limit axial movement and provide a bearing surface. Thrust bearings are designed to support axial load..
  • Thrust washers either have multiple tapered ramps and relatively small flat pads or have curved surfaces that follow a sine wave contour around their circumference..
  • Tear-drop or through grooves on the flange faces and wedge shaped ramps at each parting line allow engine oil to enter between the shaft and bearing surfaces..
  • Manufactured to meet or exceed OE specifications.
Check Stock

Clevite TW-678S Engine Crankshaft Thrust Washer Set

  • Thrust washers limit axial movement and provide a bearing surface. Thrust bearings are designed to support axial load..
  • Thrust washers either have multiple tapered ramps and relatively small flat pads or have curved surfaces that follow a sine wave contour around their circumference..
  • Tear-drop or through grooves on the flange faces and wedge shaped ramps at each parting line allow engine oil to enter between the shaft and bearing surfaces..
  • Manufactured to meet or exceed OE specifications.
Check Stock

Clevite TW-473S Engine Crankshaft Thrust Washer Set

  • Thrust washers limit axial movement and provide a bearing surface. Thrust bearings are designed to support axial load..
  • Thrust washers either have multiple tapered ramps and relatively small flat pads or have curved surfaces that follow a sine wave contour around their circumference..
  • Tear-drop or through grooves on the flange faces and wedge shaped ramps at each parting line allow engine oil to enter between the shaft and bearing surfaces..
  • Manufactured to meet or exceed OE specifications.
Check Stock

3575169 Turbocharger Rebuild kit for Holset HX35 HX35W HY35 HX40 HE351 HE351CW

  • ★100% brand-new, never ever been utilized, all parts are tested and quality controlled prior to shipment.
  • ★Fit for Holset HX35 HX35W HY35 HX40 HE341 HE351 & HE351CW turbochargers.
  • ★Improved thrust bearing with large diameter oil feed holes.
  • Complete gasket set included. including 28 quality components.
  • ★Commons Vehicles With This Turbo: for Dodge Ram Cummins Turbo Deisel.
  • ★This kit includes: Machined from Copper Bar Upgraded Thrust Bearing 2 Journal Bearings 4 C-Clips to Hold in the Bearings 1 Thrust Collar 1 Thrust....
Check Stock

Bailey SA Series Bearing Insert - Radial Insert Ball Bearing for High Speed Applications - Ball Bearing Steel Insert - Spherical OD Eccentric Collar - 1” ID, 2.0472” OD, Steel, 2.56 Ounces, 150854

  • SPECIFICATIONS: Our SA series radial insert ball bearings for agricultural equipment come with an eccentric shroud sleeve, have 1” inner diameter, 2.0472” outer diameter, and are made of steel. The bearing insert weighs 2.56 ounces..
  • PRECISE: The bearing bushing has an eccentric collar that allows high-speed shafts to perform eccentric functions without an eccentric axis. This eccentric bearing offers precision and efficiency in rugged agricultural applications..
  • PROTECTIVE: The eccentric locking collar in the peer bearing can handle a high degree of vibration. These collar bearings protect machinery against damage caused by vibration. These are also double sealed to reduce harm from fibers..
  • STURDY: This independent plain bearing 1 in. id is made from high-quality steel, with precision-hardened inner rings for added strength. It has a high shock absorption capacity and does not crack under pressure. Our bearing collar is made to last..
  • CONVENIENT: These sealed regreasable spherical bearings are simple to use, efficient in operation, and extremely convenient. They are useful in a number of high-speed, high-vibration applications and can be used in rugged conditions with ease..
Check Stock

Bettomshin 2Pcs 51100 Thrust Ball Bearings with Washers 10mm Bore 24mm OD 9mm Width GCr15 Thrust Bearing for Wind Spinners Slicers CNC Retrofits

  • 【Parameter】Type: Thrust Ball Bearing.
  • 【Material】Made of GCr15, durability and resistance to deformity under loads, have great wear-resistant, high temperature resistance and high hardness..
  • 【Capability】High precision, fast speed, long life, uniformly load distributed, can withstand high thrust loads. They incorporate logarithmic roller and raceway profiles with a optimized surface finish for ultimate roller to flange contact..
  • 【Features】The separable components of thrust ball bearings are interchangeable. Low noise and long service life, easy to maintain. Keep the bearing working environment clean and bearing lubricated in time..
  • 【Applications】Can be used for jack, pump, rotating applications, machine tools ect..
Check Stock

XMHF 51203 Thrust Bearing 17x35x12mm Thrust Single Ball Row Bearings 3Pcs

  • Dimensions: 17mm x 35mm x 12mm/0.67”x1.4”x0.47”.
  • Package Content: 3 x Thrust Ball Bearing.
Check Stock

Rannb 51202 Thrust Ball Bearing Axial Ball Thrust Ball Bearings 12mm x 32mm x 15mm - Pack of 3

  • 【Material】The 51202 Thrust Ball Bearing is made of Chromium Steel (GCr15),durability and resistance to deformity under loads..
  • 【Dimension】Bore Diameter : 15mm/0.59".
  • 【Application】Designed for low speed operation and axial loads only..
  • 【Easy to Use】The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections..
  • 【Package Content】3pcs x 51202 Thrust Ball Bearing.
Check Stock

XMHF 4pcs 51204 Carbon Steel Axial Thrust Ball Bearing 20mm x 40mm x 14mm

  • Package Content : 4x Thrust Ball Bearing.
Check Stock

PULSAR 6.6 Duramax LLY Turbo Rebuild Kit Billet Compressor Wheel 2004.5-2005

  • 5 Axis CNC milled, machined from Solid, make more aggressive blades design possible,Spool up faster, Lower EGTs and More Boost!.
  • 360º thrust bearing vs. stock 270º thrust bearing enhances turbochargers durability..
  • Fits 2004.5-2005 Chevy/GM 6.6L Duramax LLY Garrett GT3788VA Turbo ONLY.
  • BE AWARE this compressor wheel doesn't fit LB7 LBZ turbos.
Check Stock