Categories

Best Spi Isolators

HiLetgo 1602 LCD Keypad Shield 1602 LCD Expansion Shield Board Blue Backlight 4.5-5.5V for Arduino Duemilanove Robot

  • ☆ Premium Quality: Made of premium material, this lcd module display is sturdy, not easy to aging and abrasion resistant, to ensure maximum strength and durability for long lasting usage.
  • ☆ TFT LCD Serial Port Module : The lcd display module is a new 2.8 inch serial SPI color display module. Designed with one socket for sd card and PCB adapter for LCD.
  • ☆ Come With PCB Plate: With PCB plate (including power supply IC, SD), pcb display module is compatible with 5110 interface. Resolution: 128x160.
  • ☆ Support Analog & Hardware SPI: This tft display module supports analog SPI and hardware SPI, less I/O port need. It can be driven by 8051 / AVR / PIC /ARM/STM32. It can be driven with at least four IO.
  • ☆ What You Will Get: If you need the document to download, please contact us. We stand behind all of our them with a 100% product guarantee and promise to give you the best in customer care.
Check Stock

LED LCD Universal TV Backlight Constant Current Backlight Lamp Driver Board Boost Step Up Module 10.8-24V to 15-80V 14-37 Inch

  • This is a new 1.8 inch serial SPI color display module.
  • Support analog SPI and hardware SPI. SPI serial, less I/O port need.
  • Designed with one socket for sd card and PCB adapter for LCD.
  • It can be driven by 8051 / AVR / PIC /ARM/STM32.
Check Stock

DORHEA 2Pcs BME280 5V Temperature Humidity Atmospheric Barometric Pressure Sensor Module GY-BME280-5V IIC I2C Breakout Board

  • The BME280 sensor is a precision sensor, is soldered onto PCB, not only the pressure and the temperature, this sensor can measure humidity..
  • BME280 5V uses both I2C and SPI (supports 3-, 4-wire SPI) interface. Interface: I2C (up to 3.4MHz).
  • Temperature humidity module is great for all sorts of weather sensing and can even be used in both I2C and SPI. for simple easy wiring, go with I2C. If you want to connect a bunch of sensors without worrying about I2C address collisions, go with SPI..
  • The BME280 stmospheric pressure sensor is made up of a very accurate pressure sensor and an associated temperature sensor which helps calibrate the pressure readings..
  • The BME280 sensor is precision sensing solution for measuring barometric pressure with ±1 hPa absolute accuraccy, and temperature with ±1.0°C accuracy. Because pressure changes with altitude, and the pressure measurements are good, you can also use it as an altimeter with ±1 meter accuracy..
Check Stock

Happymodel Mobula6 Quadcopter Indoor Four-axis 1S 65mm Brushless Bwhoop Drone BNF AIO 4IN1 Crazybee F4 Lite Flight Controll Built-in 5.8G VTX Parts Without Remote Controller (25000KV Frsky RX)

  • Flight controller: (Frsky SPI RX version) CRAZYBEE F4 Lite Frsky version Firmware target: CrazybeeF4FR.
  • (Flysky SPI RX version) CRAZYBEE F4 Lite Flysky version Firmware target: CrazybeeF4FS.
  • Onboard 4in1 ESC: MCU upgraded to EFM8BB21.
  • Current: 5A continuous peak 6A (3 seconds).
  • OnboardFrsky SPI D8 receiver Version: SPI BUS receiver Frsky D8 compatible.
  • No ground interference ( Transmitter and receiver 1 m from the ground): 100m~200m.
  • OnboardFlysky SPIreceiver Version: SPI BUS receiver.
  • No ground interference ( Transmitter and receiver 1 m from the ground): 100~200m.
Check Stock

ButtKicker BK-CMAK Couch/Chair Mounting Accessory Kit

  • Easy-to-use kit simplifies installation of your ButtKicker LFE.
  • Allows ButtKicker LFE to be placed simply and securely on whatever furniture you are going to be using.
  • Attaches directly to the leg of your couch or chair, while sitting on rubber isolators.
  • Includes five additional rubber isolators, drastically improving the performance of your ButtKicker LFE.
  • Kit comes with all the necessary mounting hardware, and a handy wrench.
Check Stock

MAOPINER 4Pack Ceiling Vibration Damping Mounts, Spring Vibration Isolator for Soundproof and Shockproof for A/C Air Handler Bedroom Theater Studio, 110 Lb Capacity, 1.20\ Deflection

  • Premium Material: The red part of the ceiling vibration damping mounts is made of silicon instead of rubber, better functioning in absorbing vibration. And also the silicon applied is qualified, safe and environmentally friendly material..
  • Specification: 100mm*45mm*50mm or 4''*1.8''*2''.
  • Weight: 0.4kg. Material: steel & rubber. Max load: 50kg (110lbs).
  • The recommended distance of each two isolators is 24 inch, e.g. 63~99 isolators are needed for a room aera of 215~322 sq ft.
  • Easy To Install: The base of the mechanical vibration damping pads has 1 bolt hole on base for rigid mounting when used for supporting machinery, easy installation on ceilings, floors, walls, ducts, etc..
  • Wide Application: : The shock absorber can be used in bedroom, studios, home theaters, houses, hotels, bars, karaoke room etc. Can be mounted to ceilings, walls, pumps..
  • Package Included: 4 x 110 Lb capacity spring vibration isolators.
Check Stock

MuHize Black D-Ring Shackle Cover 2 Pcs Shackle Isolator and 4 Pcs Washer, Isolators Washers Kit Fits 3/4 inch Shackle Gear Design Rattling Protection (Pack of 2)

  • PACKAGE INCLUDED - MuHize 2Pcs black D-ring shackle isolators + 4 Pcs black washers kit. Perfect fit for standard 0.75" or 3/4" D-Rings or Shackles with 7/8" screw pin..
  • EASIEST DIY FOR BUMPER - The shackle isolators and washers are one of the DIY necessities of the off-road trail or everyday driving. The quality shackle isolators can both protect Wrangler or pickup bumper finishes from damage and make it look cool after DIY modification..
  • EASY TO INSTALL - No Screws or drilling are required. And the washers can reduce rattling noise when the vehicle is in motion..
  • DURABLE MATERIAL - MuHize isolator & washers are specific for durable rubber material, which can prevent shackles from crack, warp or corrode effectively..
  • HIGH QUALITY - Perfect bending can be matched with 3/4 inch D-ring shackle. Accurate design. It can be used as a buffer to effectively protect the bumper..
Check Stock

SparkFun MicroMod Artemis Processor - Modular Interface Ecosystem That Connects Artemis microcontroller/Processor Board to Various/Carrier Board peripherals

  • Artemis General Features: 1M Flash / 384k RAM, 48MHz / 96MHz turbo available, 6uA/MHz (operates less than 5mW at full operation), 48 GPIO - all interrupt capable, 31 PWM channels, Built in BLE radio and antenna.
  • Additional Artemis Features: 10 ADC channels with 14-bit precision with up to 2.67, million samples per second effective continuous, multi-slot sampling rate.
  • Additional Artemis Features: 2 channel differential ADC, 2 UARTs, 6 I2C buses, 6 SPI buses, 2/4/8-bit SPI bus, PDM interface, I2S Interface, Secure 'Smart Card' interface, FCC/IC/CE Certified (ID Number 2ASW8-ART3MIS).
  • Specific Peripherals made available on MicroMod Artemis: 1x USB dedicated for programming and debug, 1x UART with flow control, 2x I2C, 1x SPI, 1x Quad-SPI, 8x Fast GPIO, 2x Digital Pins, 2x Analog Pins, 2x PWM, 1x Differential ADC pair, Status LED, VIN Level ADC.
  • Additional peripherals are available but are shared on dedicated MicroMod pins. Processor board only, additional carrier board(s) will be needed to use..
Check Stock

HAPPYMODEL Mobula6 1S 65mm Brushless Whoop Drone Mobula 6 BNF AIO 4IN1 Crazybee F4 Lite Flight Controller Built-in 5.8G VTX RC Toy Gift (25000KV Frsky)

  • Flight Controller: (Frsky SPI RX Version) CRAZYBEE F4 Lite Frsky version Firmware target: CrazybeeF4FR.
  • (Flysky SPI RX Version) CRAZYBEE F4 Lite Flysky version Firmware target: CrazybeeF4FS.
  • Receiver Option: Internal SPI Frsky Version (Compatible with ACCST D8/D16, Recommend Non EU transmitter D8 mode).
  • Internal SPI Flysky version(Compatible with AFHDS 8CH and AFHDS-2A 14CH Flysky transmitter).
  • Motor Speed Option: SE0802 KV25000(Race Edition).
  • Onboard 4in1 ESC : Support BLHeliSuite Programmable.
  • AIO 4IN1 Crazybee F4 Lite Flight Controller built-in 5.8G VTX.
  • Extreme Light 1S 65mm Brushless Whoop only 20g.
  • Runcam Nano3 The Lightest 1/3 CMOS 800TVL Camera.
Check Stock

3.3V 2.4 inch TFT LCD Touch Panel for Industry with PCB ILI9341 240x320 Pixels for Home

  • This is a new 2.8 inch serial SPI color display module with touch function, 5V compatible, use with 3.3V or 5V logic..
  • Support analog SPI and hardware SPI, Designed with one socket for memory card..
  • With PCB plate (including power supply IC, Memory Card), compatible with 5110 interface..
  • This kit requires professional knowledge and ability, please make sure you know how to use it..
  • Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering..
Check Stock

SEEU. AGAIN 4pcs 0.96 Inch I2C OLED Display Module IIC SSD1306 128x64 LCD White with 4 Pin Female to Female Du-pont Wire

  • I2C mode up to 400Khz, configurable slave address.
  • Two pin 3.3V UART mode, baud rates {9600, 19200, 38400, 57600, 115200}.
  • 4-pin SPI mode, supports all 4 standard SPI modes, up to 3Mhz clock.
  • Backlight brightness and contrast controlled by software commands.
  • Source code examples for custom applications, showing how to interface with the LCD from any I2C/UART/SPI hardware.
Check Stock

ACEIRMC 3pcs W5500 SPI to LAN Ethernet Network Module TCP IP STM32 Interface 3.3V 5V for Arduino WIZ820io RC5

  • Power supply mode:3.3V external power supply, current should be more than 200mA.
  • USR-ES1 is the Ethernet module of a SPI interface, interface is TTL level of 3.3V, power supply voltage of +3.3V, please ensure that the current is not less than 200mA, voltage is continuous and stable +3.3V..
  • W5500 SPI to LAN Ethernet Network Module TCP IP STM32 Interface 3.3V 5V for Arduino WIZ820io RC5.
  • Control interface:The TTL level, 3.3V SPI interface.
Check Stock

Andifany PCIE 2S Serial Port Card DB-9 Pin -232 Serial Industrial COM Port Expansion Card AX99100 for PC

  • Compatible devices: serial connected devices, serial network/monitoring equipment, data acquisition systems, POS terminals and industrial PCs, serial I/OUSB for add-on cards, I/O expansion for embedded systems.
  • 2S + SPI (PCIe to dual serial and SPI) and LB (PCIe to local bus/ISA)-Like) are suitable for different types of applications..
  • AX99100 is a single-chip solution that can fully integrate PCIe 2.0 Gen 1 endpoint controller and SerDes with various peripherals, such as two/four high-speed serial ports, one parallel port, I2C master, high-speed SPI, local Bus (ISA-Like)) and GPIO..
  • Composed of four main configurations, such as 2S (PCIe to Dual Serial), 2S + 1P (PCIe to dual serial and single parallel),.
  • Single-channel (X1) PCI Express endpoint with integrated PHY controller.
Check Stock