Southwest Wheel R30484X 84 Spindle & 5-5\ Bolt Circle Trailer Hub

  • 1 1/4" Diameter, 3 3/8" long shaft, BT8 1" spindle..
  • Spindle includes spindle nut, spindle washer, and cotter pin..
  • Hub includes inner and outer bearing L44643, seal, grease cap, and lug nuts..
  • Rated at 1000 lbs. per spindle, two will hold 2,000 lbs..
Check Stock

SOUTHWEST WHEEL 2,000 lbs Trailer Axle Spindle with 4-4\ Bolt Circle Hub

  • 1 1/4" Diameter, 3 3/8" long shaft, BT8 1" spindle..
  • Spindle includes spindle nut, spindle washer, and cotter pin..
  • Hub includes inner and outer bearing L44643, seal, grease cap, and lug nuts..
  • Rated at 1000 lbs. per spindle, two will hold 2,000 lbs..
Check Stock

SOUTHWEST WHEEL 2,000 lbs Trailer Axle Spindle with 5-4.5\ Bolt Circle Hub

  • 1 1/4" Diameter, 3 3/8" long shaft, BT8 1" spindle..
  • Spindle includes spindle nut, spindle washer, and cotter pin..
  • Hub includes inner and outer bearing L44643, seal, grease cap, and lug nuts..
  • Rated at 1000 lbs. per spindle, two will hold 2,000 lbs..
Check Stock

SOUTHWEST WHEEL 2-Pack 2,000 lbs Trailer Axle Spindle with 4-4 Bolt Circle Hub

  • 1 1/4" Diameter, 3 3/8" long shaft, BT8 1" spindle..
  • Spindle includes spindle nut, spindle washer, and cotter pin..
  • Hub includes inner and outer bearing L44643, seal, grease cap, and lug nuts..
  • Rated at 1000 lbs. per spindle, two will hold 2,000 lbs..
Check Stock

SOUTHWEST WHEEL 2-Pack 2,000 lbs Trailer Axle Spindle with 5-4.5 Bolt Circle Hub

  • 1 1/4" Diameter, 3 3/8" long shaft, BT8 1" spindle..
  • Spindle includes spindle nut, spindle washer, and cotter pin..
  • Hub includes inner and outer bearing L44643, seal, grease cap, and lug nuts..
  • Rated at 1000 lbs. per spindle, two will hold 2,000 lbs..
Check Stock

Grizzly Industrial G0709-14 x 40 Gunsmithing Gearhead Lathe

  • 2 MT#3 dead centers (1 carbide tipped) 1 MT#3 live center 1 MT#5 - MT#3 sleeve 1/2" drill chuck w/ MT#3 arbor.
  • Dimensions 51-3/4"H, 71-3/4"L, 30"W Approximate shipping weight 1550lbs 11" face plate.
  • Motor 2 HP, 110/220V, single-phase, 20/10 Amps, 60Hz, 1725RPM Number of speeds 8 Range of speeds 70-2000RPM.
  • Spindle bore 1-9/16" Spindle nose taper MT#5 Spindle nose D1-5 Camlock D1-5 spindle nose (6 pin) 1-9/16" spindle bore.
  • Swing over bed 14" Swing over gap 19-3/4" Swing over cross slide 8-3/4".
Check Stock

SOUTHWEST WHEEL 5-Hole, 4.5\ Bolt Circle Idler Hub for 2,000 lb. Axles (BT8 Spindle) 1\ Spindle

  • Round R30484X 84 Spindle & 6-5.5" Bolt Circle Trailer Hub..
  • 6 studs 5.5" Bolt circle using L68149 inner and L44649 outer bearing hub..
  • Includes Hub, inner bearing, outer bearing, seal, grease cap & lug nuts..
  • 84 Spindle, Spindle width =1 3/4" Spindle length=4" Overall length =8 7/8" Capacity (pair) 3,000 lbs..
Check Stock

Rigid Hitch Trailer Hub Kit - for 1-3/8\ Inner / 1-1/16\ Outer Tapered Spindle - 5 Bolt on 4-1/2\ Bolt Circle

  • Round R30484X 84 Spindle & 5-4.5" Bolt Circle Trailer Hub.
  • 5 studs 4.5" Bolt circle using L68149 inner and L44649 outer bearing hub.
  • Includes Hub, inner bearing, outer bearing, seal, grease cap & lug nuts.
  • 84 Spindle, Spindle width =1 3/4" Spindle length=4" Overall length =8 7/8" Capacity (pair) 3,000 lbs.
Check Stock

RIGID HITCH INCORPORATED Pair of 4-Bolt on 4 Inch Hub Assembly (AKSQ-200044) Includes (2) Square Shaft 1 Inch Straight Spindles & Bearings

  • Round R30484X 84 Spindle & 5-5" Bolt Circle Trailer Hub.
  • 5 studs 5" Bolt circle using L68149 inner and L44649 outer bearing hub.
  • Includes Hub, inner bearing, outer bearing, seal, grease cap & lug nuts.
  • 84 Spindle, Spindle width =1 3/4" Spindle length=4" Overall length =8 7/8" Capacity (pair) 3,000 lbs.
Check Stock

RIGID HITCH INCORPORATED Pair of 4-Bolt On 4 Inch Hub Assembly (AKSQ-220044) Includes (2) Square Shaft 1-1/16 Inch Straight Spindles & Bearings

  • Round R50642X 42 Spindle & 8-6.5" Bolt Circle Trailer Hub..
  • 8 studs 6.5" Bolt circle using 25580 inner and 14125A outer bearing hub..
  • Includes Hub, inner bearing, outer bearing, seal, grease cap & lug nuts..
  • 42 Spindle, Spindle width =2 1/4" Spindle length=6" Overall length =11 1/16" Capacity (pair) 5,000 lbs..
Check Stock

RATTMMOTOR CNC 2.2KW Air Cooled Spindle Motor Kit 220V Spindle Motor ER20 80mm 24000RPM+2.2KW VFD Drive 220V Inverter Variable Frequency Drive Converter+80mm Mount Clamp Bracket for CNC Router Machine

  • 【Package Include】: 1 x 2.2KW 220V Air Cooled Spindle Motor + 1 x 2.2KW VFD Inverter 220V + 1 x 80mm Spindle Motor Mount(with 3pcs screws).
  • 【2.2KW Spindle Motor】: ①This is a 220V-2.2KW air-cooled 8A Φ 80x195mm spindle motor come with a ER20 nut and collet. Frequency is 400HZ, 0.005....
  • 【2.2KW VFD Parameters】Control Model: SPWN. Power: 2.2KW. Input:1 or 3 phase 220V 0-50Hz/60Hz. Output:3 phase 220V 0-400Hz. Communication....
  • 【How to Connect Spindle Motor and VFD】The spindle motor's aviation plug marked with number 1, 2, 3, 4. Number 1, 2, 3 port are connected....
  • 【80mm Spindle Motor Mount】Material is aluminum,surface sandblasted. Compared with the aluminium profile fixture,the accuracy is much eavier, much....
Check Stock

Kidco Y Spindle

  • The y spindle Wraps around the baluster to provide a secure installation..
  • On all Gateway models, the y spindle can be used on either side of the gate. Simply swap out the included padded spindles for a y spindle on as many corners as is needed..
  • For installation of a pressure-mounted gate on a staircase with balusters on both sides, you will need to use a K100 installation kit..
Check Stock

Symmons TA-10H Temptrol Spindle

  • Constructed of brass, bronze, plastic, and stainless steel.Includes spindle and gasket.Limited lifetime for consumer.
Check Stock