Categories

Best Spindle Nut

SOUTHWEST WHEEL 2,000 lbs Trailer Axle Spindle with 5-4.5\ Bolt Circle Hub

  • 1 1/4" Diameter, 3 3/8" long shaft, BT8 1" spindle..
  • Spindle includes spindle nut, spindle washer, and cotter pin..
  • Hub includes inner and outer bearing L44643, seal, grease cap, and lug nuts..
  • Rated at 1000 lbs. per spindle, two will hold 2,000 lbs..
Check Stock

SOUTHWEST WHEEL 2-Pack 2,000 lbs Trailer Axle Spindle with 4-4 Bolt Circle Hub

  • 1 1/4" Diameter, 3 3/8" long shaft, BT8 1" spindle..
  • Spindle includes spindle nut, spindle washer, and cotter pin..
  • Hub includes inner and outer bearing L44643, seal, grease cap, and lug nuts..
  • Rated at 1000 lbs. per spindle, two will hold 2,000 lbs..
Check Stock

USAReplacementparts Manual Hub Spindle 1-58-16 Inch Thread Locking Hub Conversion Kit 32720, 9790, 20990 & 29071 USA Made

  • Manual Hub Spindle Nut Kit Locking Hub Spindle Nut.
Check Stock

SOUTHWEST WHEEL 2-Pack 2,000 lbs Trailer Axle Spindle with 5-4.5 Bolt Circle Hub

  • 1 1/4" Diameter, 3 3/8" long shaft, BT8 1" spindle..
  • Spindle includes spindle nut, spindle washer, and cotter pin..
  • Hub includes inner and outer bearing L44643, seal, grease cap, and lug nuts..
  • Rated at 1000 lbs. per spindle, two will hold 2,000 lbs..
Check Stock

Fowler 52-243-212-1, Inside Tube Micrometer With 2-12\ Measuring Range

  • Each set consists of an inside micrometer head and a series of fully hardened and lapped extension rods of different lengths.
  • Anvil and spindle are hardened and precision ground with microcap finish on ends.
  • Spindle thread hardened, ground and lapped.
Check Stock

[4-Sets] 3500lbs Trailer Axle Bearing Kit - L44649/10, L68149/11 for #84 Spindle 1.719''- 10-19 (171255TB) Seal, Dust Cap, Spindle Nut, Shaft Washer, Lug Nuts

  • ✔️[Tapered Roller Bearings] - L44649 / L44610 -- Set , L68149 / L68111 -- Set.
  • ✔️[Grease Seal] - 171255TB Double Lip (10-19) --.
  • ✔️[Hardware] - Cotter Pin, Dust Cap, Shaft Washer, Spindle Nut, Lug Nuts, Tang Washer.
  • ✔️[Application] - Bearing Kit for 3500 LBS Trailer Axle, Spindle #84 , EZ-Lube Axle.
  • ✔️ [Quantity in Package] - 4 Sets of L44649/L44610 , 4 Sets of L68149/L68111, 4 Pieces of Grease Seal 171255TB (10-19), 4 Pieces of Tang Washer, 4 Pieces of Cotter Pin, 4 Pieces of Dust Cap, 4 Pieces of Spindle Nut, 4 Pieces of Shaft Washer, 20 pieces of Lug Nuts.
Check Stock

RATTMMOTOR CNC Router Spindle Motor 220V 2.2KW Square Air Cooled Spindle Motor ER20 4 Bearings 3-Phase 24000RPM 6A 400Hz for CNC Router Engraver Milling Cutting Machine

  • 【Simple discreption】This is a 220V 2.2KW Square air-cooled spindle motor come with a ER20 nut and collet. Current is 6A, frequency is 400HZ,....
  • 【Spindle speed】The speed of the spindle motor is 0-24000RPM. Because it is a high-speed spindle motor, the spindle speed must not be lowered than....
  • 【How to wring it to Inverter】The spindle’s terminal U1, V1, W1 are connected separately to inverter’s terminal U, V,W. Connect any 2pin....
  • 【Note】Before driving, turn the shaft by hand first. The temperature's rise caused by the high-speed rotation of the spindle motor can be....
  • 【Main application】Wood, Aluminum, Glass, PVC industry.The Spindle motor is mainly suitable for NON-metallic engraving..
Check Stock

MOSNAI Golf Cart Front End King Pin Repair Kit for Club Car DS 1981-Up Gas/Electric Golf Cart OEM# 1016386/1010150/1016389/8067/7048（Pack of 2）

  • ✅【Fit Models】The front end king pin repair kit for Club Car DS 1981-up G&E Golf Cart, fit Delta A plate + nut..
  • ✅【Replace OEM Part】Brand new king pin assembly 1016386, Upper Spindle Bushings 8067, Lower Bushing Flanged 7048, Thrust Bearing Washer 1010150, Kin Pin Wave Washers 1016389..
  • ✅【Function】This king pin repair kit will do your whole cart, for both the driver and passenger sides.Perfect fit, directly replaces worn out original king pins, could improve the front end performance a lot..
  • ✅【High Quality】 Well made, meets OEM specifications, please carefully check the year, model and serial number of your golf cart before purchasing..
  • ✅【Package Content】 2 x DS King Pin Assembly, 2x Upper Spindle Bushings, 2x Lower Spindle Bushings, 2x Thrust Bearing Washer, 2x Kin Pin Wave Washers,2 x Hex Locking Nut..
Check Stock

Milling on the Drill Press (DVD, 4 Hours)

  • 【Much More Powerful】The motor power of RCOG-25V milling drilling machine has a 1100W brushless spindle drive motor providing tremendous torque and variable speeds from 50-22250 RPM continuously, with overload and overheating protection fuction.The noise of this motor is very low and it is very easy to maintain.So much power will make your work much more efficient..
  • 【Parameters】Metric Scale MT3 Milling Machine adopts high precision grinding all steel spindle with excellent strength grinding gear,X axis:18.9",Y axis:6.9",Z axis:11",it has own DRO for 3 axis.Headstock swivels 360 degrees.Max drilling diameter:0.9",Max Face screening capacity:2.5",Max vertical milling capacity:0.79",Distance from spindle to table:13.8",Spindle taper:MT3,Table size:27.5"x7.1".The speed display shows inch..
  • 【Micro-Feed Precision】Benchtop Milling Drilling Machine has a micro-feed function,the accuracy is up to 0.01'', only need to tighten the middle nut of the right hand wheel to achieve the micro-feed function, loosen the nut to achieve the manual up and down movement function.Integrated cross worktable,width is widened,with high pr....
Check Stock

NEIKO 02531A 10 Piece 12 Point Socket Set 1/2” Drive, Lug Nut Remover, Spindle Nut Socket, Axle Nut Socket Set, Metric 29-39mm Socket 1/2 Drive Impact Set, Cr-Mo Impact Adapter, 3/4" -1/2” Reducer

  • HIGH TORQUE: This heavy-duty axle nut socket set is forged premium chrome molybdenum steel to handle extreme levels of impact and torque changes. Works with CV axle nut, front axle, or rear axle nut socket set..
  • LARGE METRIC SOCKET SET: Black phosphate coating increases protection from the elements ensuring a long-lasting spindle nut socket set. This 12-point socket set 1/2 drive is prefect for both front-wheel drive, and four-wheel drive vehicles!.
  • BIG SOCKET SET: This wheel bearing lock nut socket set is designed for most axle hub & spindle nuts including wheel bearings, CV axles, and knuckle assembly. Hand tools work with 6-point nuts also..
  • LASER ETCHED: Included impact adapter for use with 3/4” drive. High contrast laser etched markings for easy identification of pieces and sizes that will not wear away or rub off from everyday use..
  • AXLE NUT SET INCLUDES: 1/2" Dr.: 29mm, 30mm, 32mm, 33mm, 34mm, 35mm, 36mm, 38mm, 39mm as well as a durable blow-molded carrying case for easy transporting..
Check Stock

RATTMMOTOR CNC 2.2KW Air Cooled Spindle Motor Kit 220V Spindle Motor ER20 80mm 24000RPM+2.2KW VFD Drive 220V Inverter Variable Frequency Drive Converter+80mm Mount Clamp Bracket for CNC Router Machine

  • 【Package Include】: 1 x 2.2KW 220V Air Cooled Spindle Motor + 1 x 2.2KW VFD Inverter 220V + 1 x 80mm Spindle Motor Mount(with 3pcs screws).
  • 【2.2KW Spindle Motor】: ①This is a 220V-2.2KW air-cooled 8A Φ 80x195mm spindle motor come with a ER20 nut and collet. Frequency is 400HZ, 0.005....
  • 【2.2KW VFD Parameters】Control Model: SPWN. Power: 2.2KW. Input：1 or 3 phase 220V 0-50Hz/60Hz. Output：3 phase 220V 0-400Hz. Communication....
  • 【How to Connect Spindle Motor and VFD】The spindle motor's aviation plug marked with number 1, 2, 3, 4. Number 1, 2, 3 port are connected....
  • 【80mm Spindle Motor Mount】Material is aluminum,surface sandblasted. Compared with the aluminium profile fixture,the accuracy is much eavier, much....
Check Stock

TBAPFS 4Pcs 1/2\ Drive Deep Impact Socket Set 12 Point Metric 30mm 32mm 34mm 36mm Drive Spindle Axle Hub Nut Socket Set,Heavy Duty with Portable Storage Case,Use In Removing And Installing Axle Nuts

  • 【Size】Axle Hub Nut Hex Socket Set Including 30mm, 32mm, 34mm, 36mm. Provides the most common size sockets used in removing and installing axle nuts, spindle nut applications. Extra deep to fit various axle lengths. Each socket has a drilled head to locate retaining ball bearing on most breaker bars and impact wrenches to ensure a safe secure fit..
  • 【Work Exquisite】Heavy-duty impact quality for use with a 1/2inch drive impact tool. Manufactured from chrome steel with heat-treated for extra strength and durability, oxide finish to resist rust. The specially hardened sockets with corrosion protection are designed for the removal of damaged bolts, screws and nuts..
  • 【Professional】The 12-point spindle design keeps a tight grip and reduces damage to the wheel nut. Install, Removal, Repair to remove, install, and repair hub or axle nuts on your vehicle. Fits axle nuts on most vehicles. The innovative spiral profile digs itself into the head of a damaged screw or nut, allowing it to be easily loosened..
  • 【Axle Nut Removal】Our axle nut socket toolset is ideal for removing front-wheel-drive axle nuts. A complete toolset that will help the user with many axle nut removal jobs. All parts are well packed and assorted in a plastic box for convenient stor....
Check Stock

Anytime Tools Tubular Inside Micrometer 2-12\ Internal Precision Set

  • Each set consists of an inside micrometer head and a series of extension rods.
  • Anvil and spindle are hardened and precision ground with microlap finish on ends..
  • Positive locking nut on spindle. be calibrated by a micrometer or ring gage..
Check Stock