SOUTHWEST WHEEL 2,000 lbs Trailer Axle Spindle with 4-4\ Bolt Circle Hub
- 1 1/4" Diameter, 3 3/8" long shaft, BT8 1" spindle..
- Spindle includes spindle nut, spindle washer, and cotter pin..
- Hub includes inner and outer bearing L44643, seal, grease cap, and lug nuts..
- Rated at 1000 lbs. per spindle, two will hold 2,000 lbs..
Check StockSOUTHWEST WHEEL 2,000 lbs Trailer Axle Spindle with 5-4.5\ Bolt Circle Hub
- 1 1/4" Diameter, 3 3/8" long shaft, BT8 1" spindle..
- Spindle includes spindle nut, spindle washer, and cotter pin..
- Hub includes inner and outer bearing L44643, seal, grease cap, and lug nuts..
- Rated at 1000 lbs. per spindle, two will hold 2,000 lbs..
Check StockSOUTHWEST WHEEL 2-Pack 2,000 lbs Trailer Axle Spindle with 4-4 Bolt Circle Hub
- 1 1/4" Diameter, 3 3/8" long shaft, BT8 1" spindle..
- Spindle includes spindle nut, spindle washer, and cotter pin..
- Hub includes inner and outer bearing L44643, seal, grease cap, and lug nuts..
- Rated at 1000 lbs. per spindle, two will hold 2,000 lbs..
Check StockSOUTHWEST WHEEL 2-Pack 2,000 lbs Trailer Axle Spindle with 5-4.5 Bolt Circle Hub
- 1 1/4" Diameter, 3 3/8" long shaft, BT8 1" spindle..
- Spindle includes spindle nut, spindle washer, and cotter pin..
- Hub includes inner and outer bearing L44643, seal, grease cap, and lug nuts..
- Rated at 1000 lbs. per spindle, two will hold 2,000 lbs..
Check StockGrizzly Industrial G0709-14 x 40 Gunsmithing Gearhead Lathe
- 2 MT#3 dead centers (1 carbide tipped) 1 MT#3 live center 1 MT#5 - MT#3 sleeve 1/2" drill chuck w/ MT#3 arbor.
- Dimensions 51-3/4"H, 71-3/4"L, 30"W Approximate shipping weight 1550lbs 11" face plate.
- Motor 2 HP, 110/220V, single-phase, 20/10 Amps, 60Hz, 1725RPM Number of speeds 8 Range of speeds 70-2000RPM.
- Spindle bore 1-9/16" Spindle nose taper MT#5 Spindle nose D1-5 Camlock D1-5 spindle nose (6 pin) 1-9/16" spindle bore.
- Swing over bed 14" Swing over gap 19-3/4" Swing over cross slide 8-3/4".
Check StockLEAPGOMAX Golf Cart Spindle Bushings Kit fit EZGO TXT/PDS 2001-UP Gas & Electric, Bushing Spindle, King Pin Tubes, Claw Copper Sleeves Kit, OEM#70648-G01 70749G01 70745G01
- ⛳Fits Golf Carts: Colf Cart 2001-current E-Z-GO Gas & Electric TXT/PDS(Will not fit for EZGO RXV)4/6-Passenger Shuttle, ST 400, Woods Boundary MAV 400..
- ⛳Fits ST Sport, ST Sport II, ST Sport 2+2, ST Express, Clays Car, Workhorse-MPT (Multi-Purpose Truck) 800/1000/1200..
- ⛳Fits Refresher, Refresher 1200, Cushman 2/4/6-Passenger Bellhop, Cushman 280 and Cushman Commander 2200 Vehicles..
- ⛳High quality with heavy duty exceed OEM quality Golf Cart Spindle Bushings Repair Kit Assembly..
- ⛳Package: 2 PCS Spindle King Pin Tubes, OEM# 70745-G01,614034, 601707.
- 2 PCS Spindle Bushing with Flange, OEM#70648-G01, 632925, 601915.
- 2 PCS Spindle Bushing without Flange, OEM#70749-G01, 632926, 601916.
- 2 PCS Spindle King Pin Bolts, OEM#00407-G6, 620380.
- 2 PCS Thrust Washers, OEM# 70754-G01, 601920.
Check StockSainSmart Genmtisu CNC Router Machine Controller Board with ABS Case for CNC 1810-PRO/3018/3018-PRO
- This controller board is designed for Genmitsu CNC Router 1810-PRO, 3018, and 3018-PRO. It can perfectly compatible with SainSmart Blue Laser Module..
- Software: GRBL controller, UniversalGcodeSender..
- Support XYZ three-axis control, spindle and laser module. Support 3 pin and 2 pin lasers (the 2 pin lasers: please connect the white interface " + s-")..
- Support stepper motor: 12V, the maximum current within 2A, recommended within 1.5A and additional heat. (Any stepper motor 42, 57)..
Check StockRATTMMOTOR CNC Router Spindle Motor 220V 2.2KW Square Air Cooled Spindle Motor ER20 4 Bearings 3-Phase 24000RPM 6A 400Hz for CNC Router Engraver Milling Cutting Machine
- 【Simple discreption】This is a 220V 2.2KW Square air-cooled spindle motor come with a ER20 nut and collet. Current is 6A, frequency is 400HZ,....
- 【Spindle speed】The speed of the spindle motor is 0-24000RPM. Because it is a high-speed spindle motor, the spindle speed must not be lowered than....
- 【How to wring it to Inverter】The spindle’s terminal U1, V1, W1 are connected separately to inverter’s terminal U, V,W. Connect any 2pin....
- 【Note】Before driving, turn the shaft by hand first. The temperature's rise caused by the high-speed rotation of the spindle motor can be....
- 【Main application】Wood, Aluminum, Glass, PVC industry.The Spindle motor is mainly suitable for NON-metallic engraving..
Check StockCNCTOPBAOS 3 Axis GRBL 1.1f USB Port CNC Engraving Machine Control Board CNC Router Engraver Milling Machine Controller Board
- ♞【Model】Upgraded 3 Axis GRBL 1.1F USB Port GRBL Control Board.
- ♞【Support software】GRBL Contol/Candle(3 axis)/Universal Gcode Sender.
- ♞【Support Motor】Support XYZ three-axis control, spindle.Support stepper motor: 12V, maximum current of 2A or less is recommended within 1.5A and additional heat. (Any stepper motor Nema17,Nema23).
- Support spindle: Support 24VDC Spindle PWM speed (0%-100%),also support 3-pin PWM/TTL signal control module.
- ♞【New functions】Add 2-pin emergency stop button port,probe port,XYZ limit port and add the power button switch..
- ♞【Applications】 The control board can be used with the 1310,1610-PRO, 3018,3018-PRO and 3018-PRO MAX etc engraving machines..
Check Stock[4-Sets] 3500lbs Trailer Axle Bearing Kit - L44649/10, L68149/11 for #84 Spindle 1.719''- 10-19 (171255TB) Seal, Dust Cap, Spindle Nut, Shaft Washer, Lug Nuts
- ✔️[Tapered Roller Bearings] - L44649 / L44610 -- Set , L68149 / L68111 -- Set.
- ✔️[Grease Seal] - 171255TB Double Lip (10-19) --.
- ✔️[Hardware] - Cotter Pin, Dust Cap, Shaft Washer, Spindle Nut, Lug Nuts, Tang Washer.
- ✔️[Application] - Bearing Kit for 3500 LBS Trailer Axle, Spindle #84 , EZ-Lube Axle.
- ✔️ [Quantity in Package] - 4 Sets of L44649/L44610 , 4 Sets of L68149/L68111, 4 Pieces of Grease Seal 171255TB (10-19), 4 Pieces of Tang Washer, 4 Pieces of Cotter Pin, 4 Pieces of Dust Cap, 4 Pieces of Spindle Nut, 4 Pieces of Shaft Washer, 20 pieces of Lug Nuts.
Check StockSCSI Adapter DB25M-DM50F
- Converts a SCA 80 Pin Hard Drive Interface to SCSI I/II/III (UW) HD 50/68 Pin Connector.
Check Stock
CNCTOPBAOS 3 Axis GRBL Control Board USB Port CNC Router Controller Board grbl 1.1f with GRBL Offline Controller Remote Hand Control for CNC Engraving Milling Machine Mini DIY 1610 CNC 3018 PRO
- ♞【Model】Upgraded 3 Axis GRBL 1.1F USB Port GRBL Control Board with Offline controller.
- ♞【Applications】 The control board can be used with the 1310,1610-PRO, 3018,3018-PRO and 3018-PRO MAX etc engraving machines..
- ♞【New functions】Add 2-pin emergency stop button port,probe port,XYZ limit port and add the power button switch..
- ♞【Support software】GRBL Contol/Candle(3 axis)/Universal Gcode Sender.
- ♞【Support Motor】Support XYZ three-axis control, spindle.Support stepper motor: 12V, maximum current of 2A or less is recommended within 1.5A and additional heat. (Any stepper motor Nema17,Nema23).
- Support spindle: Support 24VDC Spindle PWM speed (0%-100%),also support 3-pin PWM/TTL signal control module.
- ♞【Offline Controller】It supports SD card and TF card at the same time, standard capacity 1G, (notebooks generally have SD card interface, copy files are very convenient).
Check StockSinLoon SCA 80 Pin to 68 SCSI Adapter SCSI 68 Female Adapter SCSI 80 Male Adapter for Data Transfer (68/80)
- Product Name: SCSI Card 68-80 SCSI hard disk adapter 68 Pin Female to 80 Pin Male (SCSI 80 pin, 68 pin adapter).
- SCSI 68 Female Adapter card is used to convert these interfaces. For example, some adapter cards can convert male to female, and some can convert 80 pin interface to 68 pin interface. In this way, 80 pin low-speed SCSI devices can be connected to 68 pin SCSI interface..
- SCA 80 Pin to 68. Jumper setting for 16 SCSI IDs. Spindle synchronous, delay start & remote start..
- The main function of the adapter card is to convert different SCSI interfaces, for data transfer between 2 SCSI drives..
- Product category: chip level maintenance tools - hard disk maintenance tools - hard disk other tools..
Check Stock
