The ROP Shop Pack of 4 Trailer Axle Kits with 4 on 4 Bolt Idler Hub & 1 Round BT8 Spindle

  • Replacement (Pack of 4) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle.
  • Specs - 1,250 lb Hub Capacity, Used On 2,000 lb Axle Shaft 1 Diameter: 1 1/4" Shaft 2 Diameter: 1" Shaft Length: 8 3/4" (4" Long Stub) Hub A Diameter.: 2 1/2" Hub B Diameter: 5 1/2" Bolt Pattern: 4". Refer to images 2 & 3 for more information.
  • Includes - (4) Idler Hub with Lug Nuts, (4) 1" BT8 Round Spindle with Castle Nut, Pin & Washer, (8) Inner/Outer Bearings, (4) Double-lip Grease Seal (1 1/4" I.D. / 2" O.D.), (4) 2" Grease/Dust Cap.
  • Assembly with 4 on 4" bolt idler hub & 1" round BT8 spindle. Rated to 1,250 lbs. each or 2,000 lbs. for the pair.
  • Fits 2,000 pound trailer axles with straight spindles, but to know if this hub is the right fit for your setup you would want to check the size your current bearings and make sure that they match up with the 1" bearings that these hubs come with as well as knowing that you have a standard length spindle. This Hub fits standard length spindles, not "short spindles".
Check Stock

Southwest Wheel R30484X 84 Spindle & 5-5\ Bolt Circle Trailer Hub

  • 1 1/4" Diameter, 3 3/8" long shaft, BT8 1" spindle..
  • Spindle includes spindle nut, spindle washer, and cotter pin..
  • Hub includes inner and outer bearing L44643, seal, grease cap, and lug nuts..
  • Rated at 1000 lbs. per spindle, two will hold 2,000 lbs..
Check Stock

SOUTHWEST WHEEL 2,000 lbs Trailer Axle Spindle with 4-4\ Bolt Circle Hub

  • 1 1/4" Diameter, 3 3/8" long shaft, BT8 1" spindle..
  • Spindle includes spindle nut, spindle washer, and cotter pin..
  • Hub includes inner and outer bearing L44643, seal, grease cap, and lug nuts..
  • Rated at 1000 lbs. per spindle, two will hold 2,000 lbs..
Check Stock

The ROP Shop (Pack of 2) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle

  • Replacement (Pack of 2) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle.
  • Specs - 1,250 lb Hub Capacity, Used On 2,000 lb Axle Shaft 1 Diameter: 1 1/4" Shaft 2 Diameter: 1" Shaft Length: 8 3/4" (4" Long Stub) Hub A Diameter.: 2 1/2" Hub B Diameter: 5 1/2" Bolt Pattern: 4". Refer to images 2 & 3 for more information.
  • Includes - (2) Idler Hub with Lug Nuts, (2) 1" BT8 Round Spindle with Castle Nut, Pin & Washer, (4) Inner/Outer Bearings, (2) Double-lip Grease Seal (1 1/4" I.D. / 2" O.D.), (2) 2" Grease/Dust Cap.
  • Assembly with 4 on 4" bolt idler hub & 1" round BT8 spindle. Rated to 1,250 lbs. each or 2,000 lbs. for the pair.
  • Fits 2,000 pound trailer axles with straight spindles, but to know if this hub is the right fit for your setup you would want to check the size your current bearings and make sure that they match up with the 1" bearings that these hubs come with as well as knowing that you have a standard length spindle. This Hub fits standard length spindles, not "short spindles".
Check Stock

The ROP Shop (Pack of 8) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle

  • Replacement (Pack of 8) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle.
  • Specs - 1,250 lb Hub Capacity, Used On 2,000 lb Axle Shaft 1 Diameter: 1 1/4" Shaft 2 Diameter: 1" Shaft Length: 8 3/4" (4" Long Stub) Hub A Diameter.: 2 1/2" Hub B Diameter: 5 1/2" Bolt Pattern: 4". Refer to images 2 & 3 for more information.
  • Includes - (8) Idler Hub with Lug Nuts, (8) 1" BT8 Round Spindle with Castle Nut, Pin & Washer, (16) Inner/Outer Bearings, (8) Double-lip Grease Seal (1 1/4" I.D. / 2" O.D.), (8) 2" Grease/Dust Cap.
  • Assembly with 4 on 4" bolt idler hub & 1" round BT8 spindle. Rated to 1,250 lbs. each or 2,000 lbs. for the pair.
  • Fits 2,000 pound trailer axles with straight spindles, but to know if this hub is the right fit for your setup you would want to check the size your current bearings and make sure that they match up with the 1" bearings that these hubs come with as well as knowing that you have a standard length spindle. This Hub fits standard length spindles, not "short spindles".
Check Stock

SOUTHWEST WHEEL 2,000 lbs Trailer Axle Spindle with 5-4.5\ Bolt Circle Hub

  • 1 1/4" Diameter, 3 3/8" long shaft, BT8 1" spindle..
  • Spindle includes spindle nut, spindle washer, and cotter pin..
  • Hub includes inner and outer bearing L44643, seal, grease cap, and lug nuts..
  • Rated at 1000 lbs. per spindle, two will hold 2,000 lbs..
Check Stock

SOUTHWEST WHEEL 2-Pack 2,000 lbs Trailer Axle Spindle with 4-4 Bolt Circle Hub

  • 1 1/4" Diameter, 3 3/8" long shaft, BT8 1" spindle..
  • Spindle includes spindle nut, spindle washer, and cotter pin..
  • Hub includes inner and outer bearing L44643, seal, grease cap, and lug nuts..
  • Rated at 1000 lbs. per spindle, two will hold 2,000 lbs..
Check Stock

SOUTHWEST WHEEL 2-Pack 2,000 lbs Trailer Axle Spindle with 5-4.5 Bolt Circle Hub

  • 1 1/4" Diameter, 3 3/8" long shaft, BT8 1" spindle..
  • Spindle includes spindle nut, spindle washer, and cotter pin..
  • Hub includes inner and outer bearing L44643, seal, grease cap, and lug nuts..
  • Rated at 1000 lbs. per spindle, two will hold 2,000 lbs..
Check Stock

VIRTIONZ Trailer Axle Kits with 4 on 4 Bolt Idler Hub & 1 Round BT8 Spindle -2pack

  • Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1".
  • 1,250 lb Hub Capacity, Used On 2,000 lb Axle Shaft 1 Diameter: 1 1/4" Shaft 2 Diameter: 1" Shaft Length: 8 3/4" (4" Long Stub) Hub A Diameter.: 2 1/2" Hub B Diameter: 5 1/2" Bolt Pattern: 4".
  • 2) Idler Hub with Lug Nuts, (2) 1" BT8 Round Spindle with Castle Nut, Pin & Washer, (4) Inner/Outer Bearings, (2) Double-lip Grease Seal (1 1/4" I.D. / 2" O.D.), (2) 2" Grease/Dust Cap.
  • Assembly with 4 on 4" bolt idler hub & 1" round BT8 spindle. Rated to 1,250 lbs. each or 2,000 lbs. for the pair.
Check Stock

Revolution Fibers Artisan Top Whorl Drop Spindle for Beginner & Advanced Hand Spinning - 11 inch Shaft | 3.25 inch Whorl Diameter | Satin Finish | Hand Crafted Rosewood Flora | Spin Roving into Yarn

  • Hand carved from beautifully turned Rosewood, the Revolution Fibers Top Whorl Drop Spindle is a tiny tool that can turn an evening by the fire (or by the TV) into a productive yarn making session. It's a simple, cheap, and portable way to get your hands busy and make something beautiful (and functional) at the same time. This Top Whorl Drop Spindle is exactly what you need to make your own yarn from any type of fiber..
  • Drop Spindle shaft is 11 inches long (12" total length), notched whorl is 3.25 inches in diameter.
  • The 3.25 ounce drop spindle is designed with, both beginners and the veteran spinning enthusiast in mind. It's ideal for many different types of yarn weights, from Baby to Worsted and countless fibers, including wool, cotton, alpaca, sari silk, and more!.
  • The hand spindle remains one of the most productive, versatile, and convenient tools for creating stunning custom yarns from home. Get started on your hand spinning journey today with this timeless, durable handmade heirloom tool.
  • Our elegantly handmade Revolution Fibers Handcrafted Drop Spindles are well-balanced, lightweight, durable wooden spindles with a strong brass wire hook opposite the whorl notch, used to “park” your yarn. Our durable Rosewood Drop Spindles have a sati....
Check Stock

Deneve Silver Flag Pole Ball Topper 1/2 inch Spindle 3 inch Wide 13NC Threading Weatherproof Flagpole Topper Flag Pole Topper Finial

  • EXQUISITE, DURABLE, WEATHERPROOF: The Deneve Flag Pole Ball Ornament with 1/2 in. wide spindle with 1/2 "-13NC threading, one of the toughest flag....
  • NO HASSLE: The Deneve Gold Flag Pole Ball Ornament arrives as a single, factory-welded & assembled flag pole hardware. No assembly required..
  • LONG SPINDLE SHAFT: 0.5" wide spindle shaft is long enough to accommodate the Deneve solar flag lights and other brands, too..
  • LONG-LASTING: Aluminum and corrosion-resistant, the Deneve Gold Flag Pole Ball Ornament complements Deneve's line of flag pole accessories..
  • Designed to perfectly fit through a Deneve solar flag light (B00D9C796Y and B01JYQV4AA) and the Deneve flag pole truck (B07FPSFJ7W)..
Check Stock

Deneve Gold Flag Pole Ball Topper, 1/2 inch Spindle, 3 inch Wide, 13NC Threading, Weatherproof Flagpole Topper, Flag Pole Topper, Finial

  • EXQUISITE, DURABLE, WEATHERPROOF: The Deneve Flag Pole Ball Ornament with 1/2 in. wide spindle with 1/2 "-13NC threading, one of the toughest flag pole parts available..
  • NO HASSLE: The Deneve Gold Flag Pole Ball Ornament arrives as a single, factory-welded & assembled flag pole hardware. No assembly required..
  • LONG SPINDLE SHAFT: 0.5" wide spindle shaft is long enough to accommodate the Deneve solar flag lights and other brands, too..
  • LONG-LASTING: Aluminum and corrosion-resistant, the Deneve Gold Flag Pole Ball Ornament complements Deneve's line of flag pole accessories..
  • Designed to perfectly fit through a Deneve solar flag light (B00D9C796Y and B01JYQV4AA) and the Deneve flag pole truck (B07FPSFJ7W)..
Check Stock

[4-Sets] 3500lbs Trailer Axle Bearing Kit - L44649/10, L68149/11 for #84 Spindle 1.719''- 10-19 (171255TB) Seal, Dust Cap, Spindle Nut, Shaft Washer, Lug Nuts

  • ✔️[Tapered Roller Bearings] - L44649 / L44610 -- Set , L68149 / L68111 -- Set.
  • ✔️[Grease Seal] - 171255TB Double Lip (10-19) --.
  • ✔️[Hardware] - Cotter Pin, Dust Cap, Shaft Washer, Spindle Nut, Lug Nuts, Tang Washer.
  • ✔️[Application] - Bearing Kit for 3500 LBS Trailer Axle, Spindle #84 , EZ-Lube Axle.
  • ✔️ [Quantity in Package] - 4 Sets of L44649/L44610 , 4 Sets of L68149/L68111, 4 Pieces of Grease Seal 171255TB (10-19), 4 Pieces of Tang Washer, 4 Pieces of Cotter Pin, 4 Pieces of Dust Cap, 4 Pieces of Spindle Nut, 4 Pieces of Shaft Washer, 20 pieces of Lug Nuts.
Check Stock