Shop Fox W1827 Shaper 5 Horsepower
- Motor: 5-horsepower, 220V, single-phase, 25A, 3450 RPM.
- 3-1/4-inch spindle travel, spindle speeds: 3600, 5100, 8000 and 10000 RPM.
- Precision ground cast iron table 35-1/2-by-28-by-2-5/16-inch.
Check Stock
LiFuJunDong 4 Axis USB CNC6040 Router Engraving Machine 3D Milling Machine w/Controller 110V 1.5KW VFD Water-Cooling Router Engraving Machines for Metal, Wood, Glass and Plastic (6040 1.5KW 4AXIS)
- ... Aluminium alloy Max. Feeding height: ≤100mm Drive unit: X axis---1605 Ball Screws Y axis---1605 Ball Screws Z axis---1204 Ball Screws Sliding unit: X axis---High intensity Chromeplate shaft Y axis---High intensity Chromeplate shaft Z axis---High intensity Chromeplate shaft Stepping motor: 57 two-phase 3A 150N.cm.
- SPINDLE MOTOR-1】 Outside dimension: 65*158mm Material: 304 stainless steel, Copper coil, Pressure cast aluminum pipe water jacket VOLTS, current, power: AC110V, 60Hz, 5A, 1.5 KW VFD Spindle motor: 1.5 KW Water Cooled Spindle speed: 24000 rpm Max working frequency: 400Hz Principal axis collet: ER11collet, Standard configuration :6mm Nut Model: ER11-A Cooling: Water-cooling Speed mode: By adjusting the VFD output voltage and operating frequency from 0-24000RPM.
- SPINDLE MOTOR-2】Lubrication way: lubricated by high grease Repeat accuracy: 0.05mm Spindle precision: radial beat acuities 0.03mm Carving Instructions: G code / TAB files / nc file / NCC files Communication interface: through USB connection with computer Working Speed: 50-1500mm / min (different material with different speed settings) Maximum Idle speed: 0-1500mm/min.
- HIGHLIGHTS OF WATER COOLING SYSTEM 】It can cool the spindle and protect the machine Avoid the spindle burn o....
Check StockShop Fox W1668 3/4-HP 13-Inch Bench-Top Drill Press/Spindle Sander
- Motor: 3/4 HP, 110-Volt, 1,725 RPM, Spindle Speeds 250-3050 RPM.
- Includes a 3-piece spindle sander drum kit with a mandrel and 80 grit sanding paper to fit the 1-Inch, 1-1/2-Inch and 2-Inch drums..
Check StockWestern Digital Caviar SE 80GB SATA WD800JD 7.2K Hard Drive
- Western Digital WD800JD 80 GB Serial ATA 150 Hard Drive General Features: 80 GB storage capacity.
- 7200 RPM spindle speed 8 MB Buffer 4.20 ms average latency Average Read Seek Time: 8.9 ms.
- Buffer to Host (transfer rate): 150 MB/sec. SATA/150 interface 3.5-inch form factor.
- Power Specifications: +5V, 0.45A +12V, 0.50A Regulatory Approvals: cULus CE C-Tick BSMI MIC.
Check StockBig Horn 19534 2 inch Dia x 1-1/2 Inch Sanding Sleeves
- 18 Pack oscillating spindle sander sleeves - 80 / 150 / 240 grit assorted, 6 Pack per grit - 1/2 inch, 3/4 inch,1 inch, 1-1/2 inch, 2 inch and 3 inch sanding sleeves for each grit, all 4.5" in length.
- Different diameters and grits fit your task and machine perfectly.
- Aluminum oxide abrasive sleeves provide high performance for professional material removal, sanding, and resurfacing.
- Fit most Oscillating and Spindle Sanders such as RYOBI, DELTA, GRIZZLY, ENLON, POWERTEC, WEN, Rockwell, Fox, Triton.
- If you have any problem,contact us and we will give you 100% Satisfaction Guarantee.
Check StockSainSmart Genmtisu CNC Router Machine Controller Board with ABS Case for CNC 1810-PRO/3018/3018-PRO
- This controller board is designed for Genmitsu CNC Router 1810-PRO, 3018, and 3018-PRO. It can perfectly compatible with SainSmart Blue Laser Module..
- Software: GRBL controller, UniversalGcodeSender..
- Support XYZ three-axis control, spindle and laser module. Support 3 pin and 2 pin lasers (the 2 pin lasers: please connect the white interface " + s-")..
- Support stepper motor: 12V, the maximum current within 2A, recommended within 1.5A and additional heat. (Any stepper motor 42, 57)..
Check StockGrizzly Industrial G1026-3 HP Shaper
- 2 spindle speeds: 7,000 and 10,000 R.P.M..
- 3 H.P., single phase, 220V motor with reversing switch.
- 3 interchangeable spindles: 1/2", 3/4" and 1".
- Table with standard wing attached measures 30-1/2" x 28-1/4".
Check StockDelta 18-900L 18-Inch Laser Drill Press
- Range of speeds: 140 260 320 380 480 540 980 1160 1510 1650 2180 3050 RPM Spindle.
- Range of speeds: 140 260 320 380 480 540 980 1160 1510 1650 2180 3050 RPM.
Check StockSHOP FOX M1036 Micro Milling Machine, Small
- Item may ship in more than one box and may arrive separately.
- Motor: 0.2 HP, 2A, 110 Volt, single-phase.
- Table size: 3-1/2-Inch by 8-Inch.Low speed range:0-3600,High speed range: 0-500.
Check StockGrizzly G7944 12 Speed Heavy-Duty Floor Drill Press, 14-Inch
- Range of speeds: 140 260 320 380 480 540 980 1160 1510 1650 2180 3050 RPM Spindle.
- Range of speeds: 140 260 320 380 480 540 980 1160 1510 1650 2180 3050 RPM.
Check Stock18 Pack Spindle Sander Sleeves, Sanding Sleeves for Oscillating Sander, 80 150 240 Assorted Grit Sandpaper, 4-1/2\ Length, 1/2\
- 18 Pack oscillating spindle sander sleeves - 80 / 150 / 240 grit assorted, 6 Pack per grit - 1/2 inch, 3/4 inch,1 inch, 1-1/2 inch, 2 inch and 3 inch sanding sleeves for each grit, all 4.5" in length.
- Different diameters and grits fit your task and machine perfectly.
- Aluminum oxide abrasive sleeves provide high performance for professional material removal, sanding, and resurfacing.
- Fit most Oscillating and Spindle Sanders such as RYOBI, DELTA, GRIZZLY, ENLON, POWERTEC, WEN, Rockwell, Fox, Triton.
- If you have any problem,contact us and we will give you 100% Satisfaction Guarantee.
Check Stock
CNC Router Machine 2.2KW 4 Axis 6090 USB CNC Router Kit 3D Engraving Machine + VFD Water-Cooling Spindle Motor +Control Box + Handwheel, Ball Screw, with Limit Switch, US STOCK
- ✅ [Powerful Performance] Spindle Speed: 24000RPM. Spindle motor: 2200Whigh-speed variable frequency spindle motor, ER20 chuck, matching 6mm collet. Working Speed :50-1500mm/min. Drive of Stepping motor: 0-3.5A adjustable four-axis drive. Variable-frequency Drive(VFD): AC110V, 0-400Hz(built-in Control box ) (Tips: The spindle motor must connect with the VFD. It cannot directly connect with the supply voltage (AC110V).).
- ✅ [ROUTER 6090 Parameters] Model: CNC6090GZ. X,Y,Z Working Area: 900(Y) x 600(X) x 140mm(Z). Outside dimension: 1150x970x650mm(LxWxH). Working platform size: 1045x720mm(LxW). Frame Material：The whole machine used 6061 aluminum profiles. Max. Feeding height: ≤140mm(From base of Z axis to platform). X/Y/Z axis--- Ball Screws. Stepping motor: 57 Two-phase 3A 150N.cm..
- ✅ [High Quality and Durable] Water Cooled Spindle Motor Can Work Longer Time Than Air Cooled Motor. Has Higher Stability And Better Concentricity Than Air Cooled Motor. High quality accurate ball Screws drive make the engrving more precision. Anti-blackflash, high precision, long life circle. (Note: Please don’t change the data setting of the VFD if you are not professional technicians, or it might damage the spindle motor.).
Check Stock
Fourtry Spindles Fit for Craftsman 42 inch Deck Mower - Deck Spindle Fit for Poulan HU Sears Craftsman LT1000 LT2000 LTX1000 Riding Mower with 36' 38' 42' Cutting Deck, Replace 130794, 137641, 2 Pack
- Compatible with most popular 36" 38" 42" cut lawn mower models: ① Craftsman: LT1000, LT2000, LTX1000, DLT 3000, YT3000 tractor ② Poulan: PP11536, PP1036S, PP1136J, PP11536KA lawn tractor..
- Also work with: ③HU: CT 130, CTH 130, CTH 150, LR 12, LR 120, LR 121, LR 122, LT 100, LT 120, LT 1238, LTH 130, LTH 1342, LTH 140, LTH 145, YTH 150, YTH 1542, YTH 160, YTH 180, YTH 1842, YTH 190, YTH 1942 riding mower, etc. More information please refer to product details below..
- Greasable: These 3-bolt spindles are pre-greased for direct use and are greasable for maintenance. Note: Spindle has no zerk fitting..
- Easy to install: Comes with 2 spindles, each spindle equiped with pulley lock nut, blade bolt, washer, spacer, 3 threaded mounting bolts (the mounting holes are also threaded) and 5 pointed star-shaped design blade mount..
- Replaces OEM part: AYP/ Roper/ Sears: 128285, 130794, 133172, 137641, 137645, 532128285, 532130764, 532133172. 532137645. HU: 532130794, 532-130794..
Check Stock
