Categories

Best Spindle Travel 90mm

BestEquip Metal Lathe, 8\ x 16\ Benchtop Lathe, Mini Metal Lathe 0-2500 RPM Variable Speed, Mini Lathe with 3-Jaw Chuck, Bench Top Metal Lathe, for Various Types of Metal Turning

  • Infinitely Variable Speed: The mini metal lathe with metal gears is driven by powerful motor. Variable Speed: 0-2250RPM. The LED screen shows you a clear and accurate speed for accurate working. Operate either manually or with the adjustable auto feed rate. Spindle Accuracy: 0.0004-0.0012" (0.01-0.03 mm)..
  • 400mm Large Swing Range: The benchtop lathe is equipped with a 3-jaw chuck. Swing Over Bed: 8-1/4" (210 mm) and Swing Over Cross Slide: 15-3/4" (400mm) offers more possibilities for large size or/and heavy workpieces..
  • Professional Compound Rest: The mini lathe machine quick change tool post can achieve positions of internal cutting, face cutting, and bevel cutting by changing the tool post angle and adjusting the compound rest, moving blades freely with feed rod. 4-Way turret tool post (3/8" max tool size)..
  • Supportive & Protective: Soft start, change-over switch for clockwise or counter-clockwise spindle rotation. Equipped with all-metal gears. Steady rest works as end support ensuring chatter-free operation. Backsplash guard included..
  • Adjustable Tailstock: Taper in Tailstock Spindle: MT2. Rotate the lever clockwise to lock the spindle and rotate clockwise to advance the handwheel. To off-set the tailstock for cutting tapers by adjusting the four se....
Check Stock

DAEDALUS CNC Router Machine 3018 Max, 3 Axis, 200w Spindle, All Aluminum Frame

  • ★Pre-assembled module, all aluminum frame and spindle holder with the lead screws, guide rods..
  • ★Designed to use GRBL1.1 firmware, support PC control and offline control..
  • ★Offline controller, control without computer, a great convenience and a space saver..
  • ★Max travel of X/Y/Z Axis, 300 x 180 x 45 mm. Spindle, 200w, 12000RPM. T8 lead screw, 2mm pitch..
  • ★Good at cutting strong wood(oak, pine, poplar), acrylic,plastic,PCB and aluminum..
Check Stock

Fowler 52-520-109-0, Adg Dial Indicator With 0-1\ Measuring Range (Black)

  • Microfine, white graduations against a black dial.
  • 0-100 continuous reading with revolution hand that indicates every .10": movement mounted independently from the case ensuring perfect and permanent alignment.
  • Carbide ball contact point for extended wear resistance.
  • Spindle rack and pinion are made of hardened stainless steel.
  • Forged brass body with hardened brass gears.
  • Features a 2.25" diameter dial face (Meets AGD Group II specifications) with 0.001" graduations.
  • Supplied with a center lug back to allow positioning every 90°.
  • Approximately 2-oz. of measauring pressure.
  • Features extra-long springs for uniform pressure through entire travel of spindle with a knurled bezel that easily adjusts 360°.
  • full 1-year warranty offered by Fowler High Precision.
Check Stock

Fowler 52-520-110-0 Adg Dial Indicator With 0-1 Measuring Range

  • PRECISION MEASUREMENTS: Features a 2.25" diameter dial with 0.001" graduations.
  • EASY READINGS: Microfine graduations in black for 0-100 continuous readings and red for 0-50-0 balanced readings.
  • movement mounted independently from the case on a rigid supporting plate, ensuring perfect and permanent alignment.
  • MEASURING PRESSURE: Supplied with lug backs positioned in 90° increments.
  • Group II and III gages measure with approximately 2oz. of pressure.
  • DURABLE CONSTRUCTION: Spindle rack is made of hardened stainless steel and features a carbide ball contact point.
  • brass cases and hard brass gear wheels prevent wear.
  • pinions of steel hardened, tempered, and lapped on teeth.
  • HIGH-QUALITY TOOL: Features extra-long springs for uniform pressure through entire travel of spindle with a knurled bezel that easily adjusts 360°.
  • full 1-year warranty offered by Fowler High Precision.
Check Stock

BW USA Bicycle Crank Puller – Crank Removal Tool for Mountain and Road Bikes with Square Taper Bottom Bracket Spindles

  • ... bike mechanics and cycling enthusiasts who are looking to save money by doing their own bicycle maintenance – Required tool to remove crank arms and gain access to the bottom bracket which may have come loose and resulted in creaking and/or wobbling.
  • COMPATIBILITY – Compatible with square tapered bottom bracket spindles – Not suitable for Octalink or ISIS bottom brackets – Not sure what bottom bracket type your bikes has? Remove the crank fixing bolt which attaches the crank arm to the spindle. If the shape of the axle that you see is square then this is the correct tool for your bike.
  • QUALITY CONSTRUCTION – Quality tool made from heat-treated steel to ensure years of use.
  • SIMPLE TO USE – 1. Remove the crank arm fixing bolt (either 8mm hex or 14mm socket depending on the bike) from the crank arm - 2. Use a 15mm spanner (open end wrench, crescent wrench or something similar) to thread the bottom bracket tool to the bicycle crank - 3. Attach an 8mm hex wrench to the end of the bottom bracket tool and rotate clockwise until the crank arm is freed from the bottom bracket spindle.
Check Stock

ANSJS Mountain Bike Pedals MTB Pedals Bicycle Flat Pedals Aluminum 9/16 Sealed Bearing Lightweight Platform for Road Mountain BMX MTB Bike…

  • SUPER GRIPPY - Each side of pedal with 10 replaceable hex traction pins,strong grip makes riding safer and braver for jumping..
  • ULTRA SMOOTH BEARINGS - 100% Cr-Mo spindle 9/16 threading with sealed bearings. Ride efficiently with high configuration,the spindle was made of....
  • WIDE PLATFORM - With 100mm wide platform pedals supports the foot more evenly when riding, provide more comfortable riding experience for you..
  • UNIVERSAL - Suitable for most of the mountain Bikes, Road Bikes, BMX Bikes, Folding Bikes, Urban Bikes, Travel Bikes, Fixed Gear Bikes, Unicycles,....
  • EASY TO INSTALL: L for left,R for right. 9/16" screw thread, diameter 14.3mm,Using 8mm hexagon installation and removal.You can receive your full....
Check Stock

LiFuJunDong 4 Axis USB CNC6040 Router Engraving Machine 3D Milling Machine w/Controller 110V 1.5KW VFD Water-Cooling Router Engraving Machines for Metal, Wood, Glass and Plastic (6040 1.5KW 4AXIS)

  • ... Aluminium alloy Max. Feeding height: ≤100mm Drive unit: X axis---1605 Ball Screws Y axis---1605 Ball Screws Z axis---1204 Ball Screws Sliding unit: X axis---High intensity Chromeplate shaft Y axis---High intensity Chromeplate shaft Z axis---High intensity Chromeplate shaft Stepping motor: 57 two-phase 3A 150N.cm.
  • SPINDLE MOTOR-1】 Outside dimension: 65*158mm Material: 304 stainless steel, Copper coil, Pressure cast aluminum pipe water jacket VOLTS, current, power: AC110V, 60Hz, 5A, 1.5 KW VFD Spindle motor: 1.5 KW Water Cooled Spindle speed: 24000 rpm Max working frequency: 400Hz Principal axis collet: ER11collet, Standard configuration :6mm Nut Model: ER11-A Cooling: Water-cooling Speed ​​mode: By adjusting the VFD output voltage and operating frequency from 0-24000RPM.
  • SPINDLE MOTOR-2】Lubrication way: lubricated by high grease Repeat accuracy: 0.05mm Spindle precision: radial beat acuities 0.03mm Carving Instructions: G code / TAB files / nc file / NCC files Communication interface: through USB connection with computer Working Speed: 50-1500mm / min (different material with different speed settings) Maximum Idle speed: 0-1500mm/min.
  • HIGHLIGHTS OF WATER COOLING SYSTEM 】It can cool the spindle and protect the machine Avoid the spindle burn o....
Check Stock

MDEAN ANSJS Mountain Bike Pedals MTB Pedals Bicycle Flat Pedals Aluminum 9/16 Sealed Bearing Lightweight Platform for Road Mountain BMX MTB Bike…

  • SUPER GRIPPY - Each side of pedal with 10 replaceable hex traction pins,strong grip makes riding safer and braver for jumping..
  • ULTRA SMOOTH BEARINGS - 100% Cr-Mo spindle 9/16 threading with sealed bearings. Ride efficiently with high configuration,the spindle was made of....
  • WIDE PLATFORM - With 100mm wide platform pedals supports the foot more evenly when riding, provide more comfortable riding experience for you..
  • UNIVERSAL - Suitable for most of the mountain Bikes, Road Bikes, BMX Bikes, Folding Bikes, Urban Bikes, Travel Bikes, Fixed Gear Bikes, Unicycles,....
  • EASY TO INSTALL: L for left,R for right. 9/16" screw thread, diameter 14.3mm,Using 8mm hexagon installation and removal.You can receive your full....
Check Stock

q&p Spindle Assembly Replaces 918-04889A 918-04822A 618-04822A 618-04950. Fits LTX1040 Tractor (2010 & After) 13AX90AS010 13RX90AS056 13AX90AS009 13WX90AS010 13WX90AS009

  • Replaces 618-04822 618-04822A, 618-04950, 918-04822, 918-04822A, 918-04822B, 918-04889A, 918-04889B, 91804822, 91804822B.
  • Replaces Oregon 82-058 Rotary 14328 Stens 285-868.
  • Fits Models LTX1040, LTX1042, 13AX90AS009, 13AX90AS010, 13AX90AS209, 13AX9124010, 13RX90AS056, 13RX90AS256, 13WX90AS009, 13WX90AS010, 13WX90AS209, 13WX91AS010 Garden Tractor (GT) From No.769-10425 , RIDER 76,KT725-3012, 13CC26JD011, 17ARCACS011, 21R707-0039-G1,HYDRO, SCOOTER PRO,Garden Tractor (GT).
  • Specs: Height: 6-6/7"（174mm) ， Pulley OD: 6-1/6"（157mm).
Check Stock

LAKIX CNC Router Machine, 4540 CNC Wood Router Machine with 500W Spindle 3-Axis Engraving Milling Machine for Woodworking Metal Acrylic MDF Nylon Carving Cutting Arts and Crafts DIY Design

  • ✅Powerful 500W Spindle : 3-Axis CNC router machine will allow you do both caving and engraving, with powerful 500w spindle 21000RP, will allow you to engrave more harder materials such as acrylic plastic and wood, meanwhile greatly improve work efficiency. Engineered for home and business use..
  • ✅2-in-1 Wood Carving and Engraving Machine : LAKIX CNC router milling machine compatible with spindles and laser module, will allow you do both engraving and caving, pls note our machine comes only 500w spindle , laser module is not included..
  • ✅ Large Engraving Area & Upgraded Offline Control : LAKIX CNC Router Machine has large effective engraving working area 430mm x 390mm x 90mm , LAKIX engraving machine cutter supports Win 7 / Win 8 / XP / Win 10 / Win 11, here is an option to use the offline controller that doesn’t require access to a computer..
  • ✅Sturdy Design : Excellent quality hardware,comes mostly pre-assembled aluminum metal structure , structured cabling, solid structure, smooth operation. The motor tolerates high speeds, will cut wood precisely and resists overload for a longer-lasting tool. It’s also quie....
Check Stock

CNC Spindle, MYSWEETY 500W Air Cooled 0.5kw Milling Motor and Spindle Speed Power Converter and 52mm Clamp and 13pcs ER11 Collet for DIY Engraving

  • ️【CNC Spindle kit 500W】- 1 x 500W Air-Cooled Spindle Motor, 1 x AC110V/220V Speed Governor with MACH3, 1 x 52mm Mount bracket, 13 x ER11 collect, 10 x V Bit Cutter, 4 x Screws(free)..
  • ️【500W CNC Spindle motor】- Operating voltage: 100VDC, Power: 500W, Input: AC110V, Speed: Up to idle up to 12,000 rev / min, Torque: 5000G/CM. Insulation resistance:> 2 megohms, Dielectric strength: 400V. Motor Length: 200MM, High precision spindle run out 0.01-0.03..
  • ️【Speed Power Switch】- Input voltage: AC110V/220V, 50/60Hz. Output current peak: 6A. Output voltage: DC0-100V. Please install in the place that is draughty, no dramatic impact, no vibration, no explosion hazard medium, no conductive metal particle..
  • ️【 52mm Mount Bracket】- Made of high quality cast aluminum, this spindle motor bracket clamp is strong and durable. Diameter: 52mm, Chuck portion length: 45MM, Chuck portion diameter: 16mm..
  • ️【ER11 Collet Chuck】- 13Pcs ER11 Collet Set Gripping Range: 1MM to 7MM(1mm,1.5mm,2mm,2.5mm,3mm,3.5mm,4mm,4.5mm,5mm,5.5mm,6mm,6.5mm,7mm). Run-out tolerance 0.01mm. For CNC milling Lathe Tool & Work holding Engraving machine..
Check Stock

RATTMMOTOR 110V Water Cooled Spindle Motor 2.2KW 80mm CNC Spindle Motor ER20 24000RPM 400HZ+2.2KW VFD Drive 110V Inverter Converter Spindle Motor Speed Controller+ER20 Collets for CNC Router Machine

  • Notice: (1)The spindle speed can't be lower than 9000rpm!!!! (2) This spindle only supports clockwise rotation, not reverse rotation. (3)This Spindle....
  • 【14pcs/set ER20 Collets】Size: 3.175mm,1mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm..
Check Stock

OneUp Components V2 Dropper Post Black 27.2/120mm Travel

  • - A longer dropper post is one of the best upgrades you can make to your bike. The award-winning OneUp Dropper Post is the longest travel dropper you....
  • - No other dropper can get your saddle lower. That’s because OneUp Droppers have the shortest stack height and shortest total length of any dropper....
  • - Available in 90mm, 120mm, 150mm, 180mm, 210mm and 240mm travel. Every post can be shimmed down in travel by 10 or 20mm so you can dial in your....
  • - Designed to work best with OneUp Remote , Remote available in MMX, I-spec-EV, -spec II and 22.2 bar clamp options.
  • - Weight: (30.9) 90mm 377g / 120mm 435g / 150mm 480g / 180mm 525g / 210mm 570g / 240mm 648g || (31.6) 90mm 430g / 120mm 450g / 150mm 500g / 180mm 545g....
Check Stock