Categories

Best Spiral Fluted Dies

Drill America #43 Solid Carbide Drill Bit, DMOD Series

  • Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems.
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
  • Round shanks allow use with a wide variety of toolholding systems.
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.
  • Manufactured to National Aerospace Standard 907.
Check Stock

Drill America #44 Solid Carbide Drill Bit, DMOD Series

  • Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys.
  • Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools.
  • performance is similar to uncoated tools.
  • Round shanks allow use with a wide variety of toolholding systems.
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.
  • Manufactured to National Aerospace standard 907.
Check Stock

Bridge (Construction) Reamer 1-3/16\ Extra Long Magnetic

  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance.
  • Combination black and gold finish, for improved lubricity, corrosion resistance, and to reduce chipping or flaking.
  • These round shank tools have flats ground onto three sides to reduce slippage of the bit when used in drill chucks.
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.
  • Construction reamer is especially adapted for heavy duty reaming as encountered in the fabrication of structural steel assemblies.
Check Stock

Drill America - MMO11/64-4FSE 11/64\ Carbide 4 Flute Single End End Mill, MMO Series

  • Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems.
  • Round shanks allow use with a wide variety of toolholding systems.
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.
Check Stock

HQMaster CNC Router Bit 1 8 Shank Ball Nose End Mill Cutting Dia. Spiral Milling Cutter Engraving Carving Tool Set Tungsten Steel for MDF Acrylic Wood PVC 10Pcs

  • Range of processing ---- for cutting/engraving/carving/sculpturing/roughing/milling in materials like MDF, ABS, PVC, acrylic, density board, wood, plywood, rosewood, hardwood etc..
  • Dimensions ---- diameter : 1/8 (3.175mm).
  • cutting edge length (CEL)/flute length: 17mm.
  • High efficiency ---- these bits own sharp edge which is able for fast engraving that makes high efficiency.
  • durable, high precision and not easy to break.
  • it is smokeless and burr-free while processing.
  • Perfect cutting ---- the design of flutes, larger spiral chip space of CNC Router Bit makes non-stick crumbs, smooth cutting and fast chip-removal.
  • Package contents ---- 10pcs fluted tungsten steel spiral upcut ball nose bits assorted in storage case.
Check Stock

Vipbhtool 1/4 Inch Shank Spiral Flush-Trim Router Bits Milling Spiral Flush Trim Bit Router Bits Pattern Bit Solid Carbide Flush Trim CNC Down Cut Spiral Router Bits

  • 1/4 Inch Spiral Flush Trim Router Bits. Shank: 1/4 inch.
  • Spiral Flush-Trim Router Bits Solid Carbide Flush Trim Router Bit 1/4-Inch Shank Spiral Flush Trim Down Cut. The design down-cut sharp flutes would eject chips more quickly from the routing materials..
  • Can be used with handheld, table-mounted and CNC routers. Flush trim all types of material for a perfect finish. Cut half-round grooves for fluted moldings, columns, millwork and signs using a core box bit. The bit features high quality carbide for more efficient material removal. Each bit is manufactured from high quality steel for added durability and long life..
  • Made of Solid Carbide, Premium C3 micro-grain solid tungsten carbide for a high-performance industrial quality tool, provide precise, efficient cuts and offers extreme durability. Precison finish and micro-grain carbide could assure of good performance and long tool life..
  • Our Down Cut Spiral Router Bits Redesigned with permanent bearing retaining collar to reduce trimming mishaps. For use with soft & hard woods, ply-woods, composites, laminates, plastics and some non-ferrous metals. Perfect for edging, trimming, veining and grooving in all woodworking projects for both professional carpenters and hobbyists..
Check Stock

Qualtech 26.00mm HSS 3MT Metric Taper Shank Drill Bit, DWDTSMM26.00

  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance.
  • Morse taper shank allows the tool to be inserted directly into the machine's spindle to facilitate high-torque applications such as large cut diameters.
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.
Check Stock

IRWIN Tap And Die Set with Drill Bits Machine Screw/SAE/Metric 117-Piece 26377

  • Ideal for rethreading fasteners and fastener holes for auto and machinery repair.
  • Constructed of high carbon steel for durability.
  • Puts commonly needed taps, dies, drill bits, and extractors at your fingertips.
  • Perfect set for the professional craftsman.
  • Contains 117 of the most commonly needed machine screw plug tap and hex die sizes, drill bits, spiral screw extractors, an adjustable handle tap wrench, 2-in-1 tap wrench, t-handle wrench, pitch gauges, and a plastic case.
Check Stock

Topline #44 Wire Size HSS Drill Bit 6pcs Bright Finish M2 Grade

  • Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems.
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
  • Round shanks allow use with a wide variety of toolholding systems.
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.
  • Manufactured to National Aerospace Standard 907.
Check Stock

Qualtech 1-1/2\ HSS 4MT Taper Shank Drill Bit, DWDTS1-1/2

  • Cobalt taper shank drills are made of heat resistant cobalt..
  • Engineered with heavy-duty construction to perform well in tough, hard-to-machine materials..
  • Morse taper shank allows the tool to be inserted directly into the machine's spindle to facilitate high-torque applications such as large cut diameters.
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.
  • Designed to perform in a broad range of materials in the iron and steel families.
Check Stock

Accusize Industrial Tools 1/4'', 1/2'' and 1-1/4'' 60 Degree Indexable Carbide Countersinks, 0046-0960

  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance.
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.
  • Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction.
Check Stock

Whiteside HC5122 Hercules Max Life Up/Down Cut Spiral Router Bit 1/2\ Shank

  • Whiteside HC5122 Hercules Max Life Up/Down (Compression) Cut Spiral Bit 1/2"SH.
  • Designed for heavy-duty workloads and engineered for longer bit life on high-wear applications, such as MDF and laminate.
  • The fluted design of this bit makes a compression cut that leaves smooth, clean edges on both top and bottom surfaces of your project, reducing the need for edge finishing later.
  • Fully warranted against defects in workmanship and materials.
Check Stock

Drill America 1' Reduced Shank Cobalt Drill Bit with 1/2' Shank, DWDCO Series

  • Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys.
  • Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools.
  • performance is similar to uncoated tools.
  • Round shanks allow use with a wide variety of toolholding systems.
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.
  • Manufactured to National Aerospace standard 907.
Check Stock