Best Spiral Point Bottoming Tap

Union Butterfield TN1585(UNC) High-Speed Steel Spiral Point Tap, TiN Coated, Round with Square End, Plug Chamfer, H5 Tolerance, 3 Flute, 1/4\-20 Thread Size

Spiral point tap pushes chips ahead of tool to reduce clogging.
Spiral point and straight flutes for cutting threads in through holes.
Titanium nitride (TiN) coating combines hardness with low friction for extended tool life and faster cutting.
Relieved-style design reduces friction between tap and workpiece for reduced tool wear.
Plug chamfer for easier starting and correct perpendicular alignment.

Spiral point tap pushes chips ahead of tool to reduce clogging.
Spiral point tap with straight flutes for cutting threads in through holes.
Black oxide finish improves lubricity, resists corrosion, and helps prevent buildup.
Relieved-style design with high hook, special outside diameter and pitch diameter relief, and increased back taper for free cutting action.
Some sizes are recessed between body and shank for deep-hole applications.

Price For: Each Tap Dimension Type: Inch Tap Style: Thread Forming Number of Pieces: 1 Thread Direction: Right Hand Tap Finish: Uncoated Item: Tap Number of Flutes: 0 Standards: ANSI Tap Grouping: Tap List Number: 5502 Shank Dia.: 0.255" Thread Length: 5/8" Overall Length: 2-1/2" Tap Thread Size: 1/4"-20 Tap Thread Type: UNC.
Tap Material: Vanadium High Speed Steel Tap Chamfer: Bottoming Pitch Diameter Limit: H4 Country of Origin (subject to change): United States.

High performance: tap 10x faster than hand tapping, less tap breakage increases productivity, powerful 450 watt motor.
High tech: automatic reversing action and consistent speed control (280/680 RPM) (for precise threading and less tap breakage).
Easy to use & safe: pivoting tap collet for trouble-free tap alignment, built-in safety clutch, lightweight (6lbs).
High capacity: fits standard square shank taps. Can tap steel/ferrous materials from #10 up to 9/16" (14mm) and aluminum/non-ferrous materials from #10 up to 5/8" (16mm).
Maximize XLT Tapper Performance: use Brute Platinum XL22 Spiral Point Taps and BruteLube Fluid for increased productivity.

High performance: tap 10x faster than hand tapping, less tap breakage increases productivity, powerful 450 watt motor.
High tech: automatic reversing action and consistent speed control (280/680 RPM) (for precise threading and less tap breakage).
Easy to use & safe: pivoting tap collet for trouble-free tap alignment, built-in safety clutch, lightweight (6lbs).
High capacity: fits standard square shank taps. Can tap steel/ferrous materials from #10 up to 9/16" (14mm) and aluminum/non-ferrous materials from #10 up to 5/8" (16mm).
Maximize XLT Tapper Performance: use Brute Platinum XL22 Spiral Point Taps and BruteLube Fluid for increased productivity.

Spiral point tap pushes chips ahead of tool to reduce clogging.
Spiral point with straight flutes for cutting threads in through holes.
Non-relieved design for applications requiring close gauging fits, for manual feed rate applications, or for use on older equipment.
Produces ANSI standard right-hand threads in metric sizes.
Plug chamfer for easier starting and correct perpendicular alignment.

Tap shoots chips ahead of the cutting action reducing loading and clogging in the flutes.
They are recommended for use in through or blind holes.
Allow for chip accumulation in the bottom of the hole.
Ideal for threading a wide variety of ductile materials, copper and copper alloys, brass and non-metallics.

HANDY TOOLS – These drill tap bits are must have if you fabricate a lot.
you can use the in aluminum, plastic, and so on.
Go slow, once the tap is doing its thing, make sure not to strip the threads by bottoming it out..
HIGH VERSATILITY – Set of 6 drill tap bits in SAE sizes 6-32NC, 8-32NC, 10-24NC, 10-32NC, 12-24NC, ¼-20NC, with 1/4inch hex quick-change shank, fit Electric hand drill, impact drill, bench drill, electric screwdriver and other tap machines..
EASY TO USE - Each tap drill is engraved with its size convenient for you to choose the suitable size with a glance. A tapered end on hex shank can prevent excessive knocks.
Back taper exceeds the tap to prevent over-drilling and damage to the thread..
WORRY-FREE – This Drill Tap Bits set comes with a portable storage case for convenient use and store. If you encounter any problems in using the products, please feel free to contact us for satisfactory customer service..

High hardness, fast cutting, wear high temperature..
Spiral groove is conducive to remove crumbs, not easily broken tap..
Spiral Tap the crumbs into a spiral up chip evacuation, it is more suitable for the processing of.

Greenfield Threading Plug spiral point tap: M8x1.0: Limit D5 number of flutes: 2. HSS substrate, bright finish..
Made from Premium High Speed Steel and Bright finish.
Made to Table 302A. 1.0 Threads Per Inch.

✮ [PREMIUM MATERIAL]- This metric tap set is made of high quality HSS (High Speed Steel) with titanium coating, highly hard, sharp, rustproof, anti-corrosive, durable, ensuring long time use.
✮ [DIMENSION]-5 PCS machine screw thread tap set includes: M3x 0.5 tap, M4 x 0.7 tap, M5 x 0.8 tap, M6 x 1.0 tap, M8 x 1.25 tap.
✮ [FUNCTION]- Nice spiral pointed metric tap set used to create screw threads on wood, plastic, aluminum and more materials and remove chips simultaneously. The machine screw thread tap set have 5 different size spiral pointed taps for processing through-hole threads and deep-hole threads to satisfy your various needs.
✮ [APPLICATION]-Great tap set for auto repair, household projects and machinery where metric threads are specified.
✮ [USAGE]- This machine tap set is suitable for drill presses, tapping machines, CNC and milling machines. The machine tap set can be used with tapping oil to get better quality..