Best Spiral Point Tap And Reamer

Champion Cutting Tool Heavy Duty Spiral Point Tap:XL22-3/8-16-Made in USA (12 per pack)

Heavy Duty Spiral Point Taps thread quickly, accurately, and last longer when tapping steel and other tough alloys. Made in USA.
Ideal for through holes applications since spiral point quickly shears and ejects chips ahead of the tap.
Special necked design for deeper, trouble free tapping and less tap breakage. Surface treated premium high speed steel for longer tool life..
For tapping all through hole applications in low and high carbon steel, stainless steel, alloyed steels, steel drop forgings, grey cast iron, titanium, nimonic alloys, manganese, sprint steels, and other tough alloys.

Spiral point tap pushes chips ahead of tool to reduce clogging.
Spiral point and straight flutes for cutting threads in through holes.
Titanium nitride (TiN) coating combines hardness with low friction for extended tool life and faster cutting.
Relieved-style design reduces friction between tap and workpiece for reduced tool wear.
Plug chamfer for easier starting and correct perpendicular alignment.

Spiral point tap pushes chips ahead of tool to reduce clogging.
Spiral point tap with straight flutes for cutting threads in through holes.
Black oxide finish improves lubricity, resists corrosion, and helps prevent buildup.
Relieved-style design with high hook, special outside diameter and pitch diameter relief, and increased back taper for free cutting action.
Some sizes are recessed between body and shank for deep-hole applications.

High performance: tap 10x faster than hand tapping, less tap breakage increases productivity, powerful 450 watt motor.
High tech: automatic reversing action and consistent speed control (280/680 RPM) (for precise threading and less tap breakage).
Easy to use & safe: pivoting tap collet for trouble-free tap alignment, built-in safety clutch, lightweight (6lbs).
High capacity: fits standard square shank taps. Can tap steel/ferrous materials from #10 up to 9/16" (14mm) and aluminum/non-ferrous materials from #10 up to 5/8" (16mm).
Maximize XLT Tapper Performance: use Brute Platinum XL22 Spiral Point Taps and BruteLube Fluid for increased productivity.

High performance: tap 10x faster than hand tapping, less tap breakage increases productivity, powerful 450 watt motor.
High tech: automatic reversing action and consistent speed control (280/680 RPM) (for precise threading and less tap breakage).
Easy to use & safe: pivoting tap collet for trouble-free tap alignment, built-in safety clutch, lightweight (6lbs).
High capacity: fits standard square shank taps. Can tap steel/ferrous materials from #10 up to 9/16" (14mm) and aluminum/non-ferrous materials from #10 up to 5/8" (16mm).
Maximize XLT Tapper Performance: use Brute Platinum XL22 Spiral Point Taps and BruteLube Fluid for increased productivity.

High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance.
Available in uncoated (bright) and black oxide finish.
Round shanks allow use with a wide variety of toolholding systems.
Square shank allows hand (straight and spiral flute) reamers to be held in a tap wrench or vise, depending on whether the reamer of the part is rotated.

GREAT EVERYDAY KITCHEN ITEM：This Zak Designs citrus reamer is great for everyday use in the kitchen..
SAFE MATERIAL：This citrus reamer is made of 100% melamine material that is durable and long-lasting. It is BPA-free as well as dishwasher safe.
SAVE PREP TIME: The fruit reamer juices fruits quickly and efficiently, with a comfortably rounded handle and a sharp point to easily remove seeds..
DIY TOOL：This citrus reamer is great for lemons, limes, and other fruits when the store-bought juice just doesn’t cut it..
FUNCTIONAL SIZE：This citrus fruit reamer has a functional size that puts a fresh twist on making your own lemon juice! Dimensions (LxWxH): 3. 5in x 3. 5in x 7. 25in..

Self-feeding spiral design for extra-fast and easy hand reaming.
Suitable for hand reaming on pipe, sheet metal or for enlarging conduit box outlets.
The model 2-S reamer is not suitable for power reaming.
Pipe reamer has a 1/4-inch to 2-inch (6 mm to 50 mm) pipe capacity.

...w it firmly into the newly tapped head.
Apply grease on the tap to help catch any metal shavings (rather than letting them drop into the cylinder) and back out the tap out every half turn to every whole turn to clean the metal shavings from the tap.
PERFECT SIZE: 14mm reamer with 12 points.
Use with 3/8-inch drive ratchet or wrench.
Inserts sizes are 3/8-Inch, 7/16-Inch, 1/2-Inch, and 3/4-Inch.
Tap is tapered to allow the tip to fit and rethread the hole in order for the coil to fit.
Measure your plug diameter, thread, and pitch to see if this kit is compatible.
PACKAGE CONTENTS: Rethread kit includes a tapping reamer and 4 different depths of inserts for your convenience.

Spiral point tap pushes chips ahead of tool to reduce clogging.
Spiral point with straight flutes for cutting threads in through holes.
Non-relieved design for applications requiring close gauging fits, for manual feed rate applications, or for use on older equipment.
Produces ANSI standard right-hand threads in metric sizes.
Plug chamfer for easier starting and correct perpendicular alignment.

Tap shoots chips ahead of the cutting action reducing loading and clogging in the flutes.
They are recommended for use in through or blind holes.
Allow for chip accumulation in the bottom of the hole.
Ideal for threading a wide variety of ductile materials, copper and copper alloys, brass and non-metallics.