Categories

Best Spiral Welding Pipes

Weller Mini Butane Torch - WLTBUM2

  • 【Durable】This propane torch hose is made of high-quality brass material, durable, long-distance and high-elastic hose, not easy to wear.Come with automatic ignition device.
  • 【Widely Use】 The propane torch kit can be widely used for precision brazing, pipe welding,processing meat (deburring), thawing pipes, melting ice and snow, barbecues, etc. The maximum temperature can up to 3600℉, suitable for welding 3/4" copper pipes..
  • 【Easy to Use】 Install the end of the welding torch on the gas cylinder, and then turn the bottom knob. It is equipped with Self-lgnition system and a 4.8ft hose to ensure a safe use. The flame output can be easily controlled by rotating the knob to meet the welding needs of different projects..
  • 【Ergonomic Design 】 The hose torch uses a vortex propane design that allows the flame to release maximum heat. The 4.8-feet hose ensures a safe distance between the propane tank and the flame. Ergonomic design, long-term use will not hurt your hands..
  • 【Operation And Tips】Use only MAPP and propane gas.
  • Connection standard: CGA600. Do not use this welding gun for a long time in a closed environment, because it will generate a lot of heat and consume a lot of air during work..
  • Before attaching torch to gas cylinder,check and ma....
Check Stock

10 Rods Copper Brazing Rod 15.7 Low Temperature Welding Rod Welding Consumables with Good Liquidity for Welding Refrigerator Air Conditioner Copper Pipes Copper Products

  • MATERIAL: 10 Rods copper brazing rods 15.7” are included in the package. The chemical composition of the brazing rods: Phosphor (P): 7%, Copper (Cu): the remainder..
  • ADVANTAGES: Brazing temperature range: 1310°F-1490°F. Solidus: 1310°F, Liquidus: 1490°F. Tensile Strength ( RM): 838 MPa. The PhosCopper brazing rods has good fluidity during welding, strong caulking, and can flow into small spaces..
  • PACKAGING: Cloud Fire welding rod packaging has been optimized, and it is packaged in a sealed tube, which can effectively reduce the occurrence of moisture and other events compared with other packaging. The caps at both ends can also be opened for easy storage and use..
  • APPLICATION: High-quality copper brazing rod are used for the welding of refrigerator copper pipes, air conditioner copper pipes and copper water pipe, as well as for the electromechanical industry..
  • SERVICE: When you have a problem in the process of using the welding rod, please do not hesitate to contact us immediately, we will solve all problems for you. And we look forward to getting your suggestions on the welding rod, we will continue to improve the products and serve you better..
Check Stock

VCT Pneumatic Auto Body Air Punch & Crimper Crimping Flange Flanger Tool Pipe

  • This tool works as both an air punch and air flange for auto body repair at the shop or home garage! The air flange has a versatile head that rotates 360 degrees to easily crimp flanges or lap joint sheets and pipes. The punch can create 3/16 in. holes for fastening and welding..
  • Heavy duty head rotates 360° to easily crimp flanges or lap joint sheets and pipes.
  • Punches accurate 3/16 in. holes for fasteners or welding.
Check Stock

WeldingCity Acetylene Welding Brazing Nozzle 4-W-J (Size 4) with W-J Mixer for Victor J-Series Handles

  • PARAMETERS: 5x5x7mm large triangular welding tip: high temperature resistant 304 stainless steel alloy. Fixed Weld Head: High temperature 316 stainless steel. 5mm standard round mouth..
  • LARGE TRIANGLE WELDING TIP: concave welding tip (the plastic electrode does not move after welding), which is suitable for drawing and fixing before welding..
  • FEATURES: 100% new and high quality, good high temperature resistance, smooth welding surface, non-stick welding rod, no scratches on the welded surface, more beautiful..
  • COMPATIBILITY: Mainly suitable for replacement nozzles for heat guns equipped with diaphragm pumps and vinyl heat guns..
  • APPLICATION: Special welding tip for welding PP, PVC, PE sheets, water tanks, water tanks, plastic pipes, etc..
Check Stock

Propane Torch with 4.8ft Hose and Self Ignition Trigger, Mapp Gas Torch,Welding Torch for Brazing,Barbecue,Heating,Handheld Blow Torch For MAPP Cylinder

  • 【Widely Use】 The propane torch kit can be widely used for precision brazing, pipe welding,processing meat (deburring), thawing pipes, melting ice and snow, barbecues, etc. The maximum temperature can reach 3600℉, suitable for welding 3/4" copper pipes..
  • 【Easy to Operate】 Install the end of the welding torch on the Qcc1/Type1 propane tank, and then turn the bottom knob. It is equipped with Self-lgnition system and a 4.8ft hose to ensure a safe use. The flame output can be easily controlled by rotating the knob to meet the welding needs of different projects..
  • 【Excellent and Professional Design】 The hose torch uses a vortex propane design that allows the flame to release maximum heat. The 4.8-feet hose ensures a safe distance between the propane tank and the flame. Ergonomic design, long-term use will not hurt your hands..
  • 【Specifications and Note】 Please use gas type: MAPP, MAP-PRO propane.
  • Connection standard: CGA600. Do not use this welding gun for a long time in a closed environment, because it will generate a lot of heat and consume a lot of air during work..
  • 【Service and Quality Assurance】This propane torch hose is made of high-quality brass material, durable, long-distance and high-elastic hose, not easy to wear, we will provid....
Check Stock

Welding Chipping Hammer + Stainless Steel / Carbon Steel Wire Scratch Brushes

  • Chipping material is 45 steel, the overall forging, cutter head processing and processing.
  • Welding and cleaning hand tools for welding, impact embroidering, welding slag removal.
  • Spiral barrel spring type handles with springy shock-proof design at the end with hook handle.
  • Flat and double-tailed product net weight 0.3kg, easy to use and flexible..
  • Conical nose tip surface paint treatment, smooth and scratch-free..
Check Stock

Hordion 50mm Concrete Hole Saw SDS Plus Shank Hole Saw Cutter with 202mm Connecting Rod Drill for Cement Brick Wall

  • Package Includes: 1 x 2" hole saw cutter, 1 x 7.95" connecting rod, 1 x 0.28" drill bit, 1 x screw.
  • Industrial Grade Material: Made of high-quality YG8C alloy, which is very durable and impact resistant. At the same time, using high-frequency welding technology, the welding joint is very firm, the inner and outer welding joints are smooth, the joint is accurate, and the cutting is more perfect and precise.
  • SDS Plus Shank Design: The connecting rod handle adopts SDS PLUS design, and the male thread adapter is convenient to be used with the round shank four-pit electric impact drill.
  • Widely Used: Easy to use, quick to drill, very suitable for installation of air conditioners, water heaters, water pipes, smoke exhaust pipes, sewer pipeline hole open, etc.. Mainly engaged in the opening of red bricks, cement and other wall brick structures.
  • 100% Guarantee: If you are not satisfied with the product, you can get a full refund within 90 days, just contact us. We guarantee you a 100% satisfied shopping experience at Hordion Amazon Store..
Check Stock

Floshine 8PCS DIY Stainless Steel 3 Exhaust Pipe Kit,Including Mandrel Bend Pipe & U-Bend & Straight Pipe，Universal Fit 3.0 Inch Exhaust System…

  • DIY Exhaust System–Four types of pipes totaling 16 pipes to meet your exhaust system renovation plans.
  • High-quality–Rust-proof steel and computerized mandrel bends deliver high strength and greater durability, and factory custom manufacturing provides stability and longer service life..
  • Products in the kit– 2 pcs 90°Pipes, 2 pcs straight pipe exhaust kit, 2 pcs 135°Pipes， 2 pcs 180° U-Bends.
  • Easy to installation–Each pipe is extended in diameter at one end to facilitate sliding installation of different pipes.Installation can be done with clamps or by welding.
  • Fitment–Exhaust Pipe Bender Universal fit for modifying the exhaust pipe for the 3.0 inch exhaust system, 16 pipes can be interconnected and cut to create your own exhaust system.
Check Stock

6 Pcs Welding Magnets Strength Strong Welding Magnetic Clamps Arrow Holder 25lbs Metal Working Mig Tools and Equipment 45, 90, 135 Degree Angle Magnet

  • STRONG POWER: Spurtar Angle Welding Magnet can hold and support any ferrous metal objects up to 25 lbs. These heavy-duty arrow magnets stick solidly and ensure a hand free welding while the bright red color will help you locate it more easily..
  • SAFE & SECURE: These welding holders grip metal and hold it at the angle you need to work safely and efficiently. The welding holders are compact with durable high gloss enamel end plates..
  • THREE ANGLES: The powerful magnetic angle welding tools with an arrow design supports material at 45°, 90°, and 135° for easy access and allow you to work with different angles while welding, assembly and marking work..
  • MULTIPURPOSE: The magnet welder tools are convenient to connect parts and greatly improve work safety, whether you are welding, soldering, assembling, marking off, or installing pipes. Also, it can be used as a floater to separate steel plates in practical application..
  • PREMIUM WELDING TOOL: Made of high-quality stainless steel with a powder coated finish, these welders magnets are durable, long lasting, and resistant to rust and corrosion. Spurtar Magnet Holder Makes your welding job more efficiently and precisely..
Check Stock

Floshine 8PCS DIY Stainless Steel 2.25 Exhaust Pipe Kit,Including Mandrel Bend Pipe & U-Bend & Straight Pipe，Universal Fit 2.25 Inch Exhaust System

  • DIY Exhaust System--Four types of pipes totaling 16 pipes to meet your exhaust system renovation plans.
  • High-quality--Rust-proof steel and computerized mandrel bends deliver high strength and greater durability, and factory custom manufacturing provides stability and longer service life..
  • Products in the kit-- 2 pcs 90°Pipes, 2 pcs straight pipe exhaust kit, 2 pcs 135°Pipes， 2 pcs 180° U-Bends.
  • Easy to installation--Each pipe is extended in diameter at one end to facilitate sliding installation of different pipes.Installation can be done with clamps or by welding.
  • Fitment--Exhaust Pipe Bender Universal fit for modifying the exhaust pipe for the 2.5 inch exhaust system, 16 pipes can be interconnected and cut to create your own exhaust system.
Check Stock

Duct Outlet Spiral Coupling HVAC (10\)

  • Used to Attach Two Spiral Pipes Together.
Check Stock

75LBS Welding Magnet,2 PCS 5\ Arrow Strength Welding Magnetic Holder, For Metal Working,75LBS Arc Welding Electrode Holders,45,90,135 Degree Angle Welding Magnet

  • 【2PCS 75LBS WELDING MAGNET】: 5"X2 pcs with 75 lbs weight limit, ,The center hole on the magnets allows you to easily grab the weld magnets，high quality strong magnets sticks solidly to any metal object.
  • [Perfect Angle] The arrow welding magnets can hold the material at 45°, 90° and 135° ，Arrow Angle Welding Magnets easily angle and hold your metal projects together before fusing the pieces together to allow hands free welding..
  • 【easy to use】: Whether you are welding, soldering, assembling, marking off, or installing pipes, these magnetic welding holders are convenient..
  • 【Stainless Steel Material】: Constructed of high quality stainless steel with a powder coated finish, these welders magnets are durable, long lasting, and resistant to rust and corrosion.
  • [Worry-Free After-Sales Service] Arrow Welding Magnet set has very good magnetism, and we also provide high-quality after-sales service. If you are not satisfied, you can request a full refund for replacement products, please rest assured to buy.
Check Stock

Welding 10 OZ hammer/Slag/Chipping/welder hammer economic chisel, forged steel structures and shock-absorbing handles. Rock hard. Non rotary. Flat and spike sides.

  • The Welding Hammer: Spring handle welding chisel hammer skimmer. Used for removing slag and welding residue..
  • The Spring Welding Design: Spring handle is designed to absorb the shock of contact while cleaning and shipping way welding debris..
  • The Practical Design: One end is a flat chisel and the other end is a conical chisel to get into tight spots..
  • Spiral barrel spring type handles with springy shock-proof design at the end with hook handle.
  • It can be used to remove metal slag, remove weld slag from welds and weld spatter, and beat hard objects, etc..
Check Stock