Categories

Best Splice Plate Drill

MK Morse 116244-MKM 050326116244, multi, one size

  • Applicable Plates: Burr free reaming, suitable for stainless steel, carbon steel, iron plate, aluminum plate, plastic plate, etc..
  • 4Pcs Drilling Tools: Including 3pcs step drill bit and a center punch, commonly used for woodworking grooving, drilling and cutting, etc..
  • Universal Shank: With universal shank type, can be installed on lithium electric drills, hand drills, bench drills and other equipment..
  • High Speed Steel: These drill bits are made of excellent high speed steel, with HRC58‑65 hardness, wear resistant and durable..
  • Multiple Specifications: The step drill can be used to drill holes of different specifications without changing the drill bit, which is convenient and practical..
Check Stock

2023 New Electric Drill Plate Cutting Machine, Electric Drill Shear Machine, Metal Punching Drill Bit Attachment With Adapter, Cutting Metal Of Iron, Steel, Copper, Aluminum

  • [Powerful Cutting Ability] This metal punching drill attachment has a faster cutting speed than other sheet metal cutting tools, suitable for any drill bit working between 1500-3000, easier and more powerful than ordinary scissors and knives, Can save a lot of working time and improve efficiency..
  • [Electric drill plate knife accessories] High hardness cutting head, this puncher accessory can handle iron plate (0.2-1mm), white plate (0.3-1mm), steel plate (0.2-0.8mm), copper plate (0.3-1.2mm), Aluminum plate (0.3-1.2mm)..
  • [Easy to Use]: This metal cutter attachment quickly turns your drill bit into electric scissors that fit your drill chuck perfectly. And it also comes with an adapter handle, which can be adapted to a variety of different electric drills. This drill is compact enough to fit in your toolbox or locker for easy portability..
  • 【Accurate and Precise】- Features a positioning slot for accurate sizing to complete a wide range of metal pieces such as iron..
  • 【Precautions】It is not recommended to cut stainless steel and special high-hardness alloy materials, otherwise the machine will be damaged. If stainless steel must be cut, the thickness of the stainless steel must not exceed 0.5mm. And this bit is not good for cutting plastic.
Check Stock

Trailer Valet JX5-C Center Mount Tongue Jack - Drill Powered, 5K Capacity

  • Use with an 18-24 volt cordless drill. Suggested amp of 2.5 or higher for best results..
  • Includes Part # TVDA - Trailer Valet Drill Attachment, 1 hand crank & 1 foot plate. (Drill Not Included).
  • Faster than most power jacks when using a drill..
Check Stock

Barb Drill Bit, Tapered Hole Drilling 4-32mm Multiple Sizes HRC58-65 for Metal Plastic Wood Plates

  • High Speed Steel: These drill bits are made of excellent high speed steel, with HRC58‑65 hardness, wear resistant and durable..
  • Multiple Specifications: The step drill can be used to drill holes of different specifications without changing the drill bit, which is convenient and practical..
  • Universal Shank: With universal shank type, can be installed on lithium electric drills, hand drills, bench drills and other equipment..
  • Applicable Plates: Burr free reaming, suitable for stainless steel, carbon steel, iron plate, aluminum plate, plastic plate, etc..
  • 4Pcs Drilling Tools: Including 3pcs step drill bit and a center punch, commonly used for woodworking grooving, drilling and cutting, etc..
Check Stock

-35º [Explicit]

  • 2PCS 50W 6ohm Load Resistors + 4PCS Quick wire Clip..
  • Prevent LED Turn Signal Lights or License Plate Brake Lights from hyper flashing, malfunction or trigger warning message on dashboard..
  • NOTICE! Load Resistors heat up like light bulbs and get super HOT when working. Make sure you mount them away from any wires or plastic..
  • One resistor is required for each turn signal bulb or each license plate light bulb..
  • Easy installation. Just connect the wires with the splice taps provided and no wire cutting is necessary..
Check Stock

Spot Weld Cutter Set，13 Pcs 3/8" Rotary Spot Weld Cutter Remover Drill Bits Tool and 2 Replacement Blades,Metal Hole Cutter Remover for Power Drill Spot Welding

  • [Suitable]: Sharp double-sided blade, which is more effective in separating spot welded panels than panel cutting machines. The spot-welded panel or metal plate can be perfectly removed without deforming the metal or damaging the underlying panel. Suitable for stainless steel, iron, aluminum, F.R.P, or other metal sheets.
  • [Material]: The preferred material is high-quality steel, which has excellent heat resistance, high hardness, and wear resistance. The blade diameter is 3/8 inch, and the handle size is standard 1/4 inch..
  • [Easy to separate] The spot welding cutter drill can easily separate the spot welding plate without distorting the metal plate. The spot-welded panel or metal plate can be perfectly removed without deforming the metal or damaging the underlying panel..
  • [Package includes]: 1 drill bit with cutter, 2 guide pins., 10 x additional 3/8 "cutters. Also known as: spot weld drill bit, spot weld bit, spot weld cutter drill bit, spot weld drill cutter, spotweld drill bits, spot weld cutter, Rotary Spot Weld Cutter Sets Double Sided, Power Drill Spot Welding.
Check Stock

DEOYUEND Cabinet Clamps, Cabinet Claw Cabinetry Clamps Cabinet Installation Clamps Cabinet Tools with Two Side Screws and Alignment Plate, 2 Pack, Orange

  • 【Cabinet Clamps】Cabinet Clamps made of primary steel and with steel sliding T-bars and an aluminum alignment plate, the cabinet clamp’s body and the side jaw are cast steel for long-term durability and tightness..
  • 【Dimensions】The cabinet clamps work on stiles from 1-1/2 inch to 2 inch thickness(each) with 4" opening capacity.
  • 【Anti-slip Mat】Cabinet Face Frame Clamps Tools is equipped with 3 rubber protection pads for the clamping surface and the alignment plate to avoid damage to the cabinet during installation.Face frame stiles can be tightened, aligned, pre-drilled and fastened while the clamp remains in its original position..
  • 【Movable Drill Guide Hole】The drill guide hole can be moved up and down. Both sides of the drill guide hole are laser-marked metric and inch scales, to pre-drill and drill the pilot hole more accurately and effectively..
  • 【Easy to Install】 Cabinet claw can easily tighten and align the two door ....
Check Stock

5Pcs Woodworking Drill Bit Hole Opener, Self-Centering Hole Sawing Machine, Adjustable Hinge Reamer Tool Set (15Mm, 20Mm, 25Mm, 30Mm, 35Mm)

  • 4Pcs Drilling Tools: Including 3pcs step drill bit and a center punch, commonly used for woodworking grooving, drilling and cutting, etc..
  • Applicable Plates: Burr free reaming, suitable for stainless steel, carbon steel, iron plate, aluminum plate, plastic plate, etc..
  • Multiple Specifications: The step drill can be used to drill holes of different specifications without changing the drill bit, which is convenient and practical..
  • Universal Shank: With universal shank type, can be installed on lithium electric drills, hand drills, bench drills and other equipment..
  • High Speed Steel: These drill bits are made of excellent high speed steel, with HRC58-65 hardness, wear resistant and durable..
Check Stock

Diamond Drill Bit, 5Pcs Hole Opener Drill Bit Electric Power Tool for Vitrified Brick/Stone/Marble/Granite/Concrete/Glass/Ceramic Tiles(12)

  • Universal Shank: With universal shank type, can be installed on lithium electric drills, hand drills, bench drills and other equipment..
  • High Speed Steel: These drill bits are made of excellent high speed steel, with HRC58‑65 hardness, wear resistant and durable..
  • 4Pcs Drilling Tools: Including 3pcs step drill bit and a center punch, commonly used for woodworking grooving, drilling and cutting, etc..
  • Multiple Specifications: The step drill can be used to drill holes of different specifications without changing the drill bit, which is convenient and practical..
  • Applicable Plates: Burr free reaming, suitable for stainless steel, carbon steel, iron plate, aluminum plate, plastic plate, etc..
Check Stock

Motoforti 1 Set Motorcycle Exhaust Stud Drill Plate Drilling Tool for Harley-Davidson Sportster 883 1986-2006 2011-2017

  • This tool is designed to drill out damaged exhaust studs. Can be used with most engines still in the framework..
  • Exhaust Stud Drill Plate Installtion Hole Diameter: 8.3mm / 0.33", 8.8mm / 0.35".
  • Exhaust Stud Drill Plate Total Size: 83x65x22.5mm / 3.27"x2.56"x0.89"(L*W*H).
  • Fitment:for Harley-Davidson Sportster 883 1986-2006,for Harley-Davidson Sportster 883 2011-2017,for Harley-Davidson Dyna 1992-2017,for Harley-Davidson Iron 883 2009-2017,for Harley-Davidson Electra Glide 1984-2015,for Harley-Davidson Street Glide 2006,for Harley-Davidson Street Glide 2010-2011,for Harley-Davidson Street Glide 2014-2016,for Harley-Davidson Heritage Softail 1986-2006,for Harley-Davidson Fatboy 1990-2011,for Harley-Davidson Low Rider 1985-1992,for Harley-Davidson Tri Glide 2009.
  • Package Included: 1 x Exhaust Stud Drill Plate, 2 x Drill Bit, 2 x Bolt.
  • Note: Before purchasing, please check the make, model, and year you need..
Check Stock

Scumbusting Scrub Pad with Drill Attachment Kit - Clean 5X Faster - Non-Scratch Scrubber for Tile Sink Water Spot Fiberglass Tub Vinyl Floor - Bathroom Cleaning Accessory - Automatic Spin Scrub

  • ✔ SO CLEAN SO FAST - This kit will turn your ordinary drill into a super power kitchen & bathroom scrubber. Thanks to the rotary power of your drill....
  • ✔ NO SCRATCH, MULTI-PURPOSE CLEANING SUPPLIES Nylon non-abrasive pads included with two level of stiffness. White pads are softer and suitable for....
  • ✔ IMPROVED DESIGN Made of high quality nylon, the pads are reusable. Both sides of each pad are attachable to drill plate adaptor helping to double....
  • ✔ A NEW WAY TO CLEAN : Apply elbow grease to moderately dampen the cleaning area. Turn on the drill to low speed. No need to apply lots of pressure.....
  • ✔ WHAT TO EXPECT : A set of scrub pads, drill backing plate and drill shaft DRILL NOT INCLUDED. Recommend to use with a lightweight cordless drill....
Check Stock

Rocaris 39 Pack Woodworking Chamfer Drilling Tools, Including Countersink Drill Bits, L-Wrench, Wood Plug Cutter, Step Drill Bit, Center Punch, Drill Stop Bit Collar Set, Twist Drill Bit Tool

  • ...les or hide imperfection. Can cut the plug 22mm/23mm/25mm/26mm in depth as well..
  • 3 Pcs 1/4" Hex Shank HSS Step Drill Bit Set – Great heat/ corrosion/ rust resistance with titanium coating. Specification: 4-12mm / 4-20mm / 4-32mm. Suitable for drilling holes in Iron Plate, Copper Plate, Aluminum Plate, Wood, PVC sheet, Insulation Boards. Not recommend for hard and brittle materials such as glass, tile floor, wall etc..
  • 6Pcs 1/4" Hex Shank 5 Flute Countersink Drill Bit – Made of high speed steel, they are pectect for sinking 90° hole in Wood and PVC board for ountersunk screw. Diameter- 6mm(1/4"), 8mm(5/16"), 9mm(3/8"), 12mm(1/2"), 16mm(5/8"), 19mm(3/4")..
Check Stock

Metal Nibbler Drill Attachment, Electric Drill Plate Cutter Attachment, Metal Cutter Attachment with Handles, Smooth Cut, Convenient and Efficient Metal Shears, Suitable for Home Cutting

  • High-grade Materials: The metal cutter is made of high strength carbon steel, and is designed with double scissors for smooth and flat cutting. Our sheet metal tools can avoid the soreness of using manual scissors as usual..
  • Reliable Attachment: The nibbler drill attachment includes with 1 electric drill plate cutter (No electric drill), 1 wrench, 1 hex wrench and 1 set of fixing tools. It is compatible with most hand electric drill, lithium electric drill and impact drill. We provide you with a rubber ring. If the fixed position of the electric drill handle is small, add it in..
  • Ease of Operation: The replaceable electric drill plate cutter and the handle are easy to install on the drill bit. Begin to hold and cut, you can feel the same feelings of cutting like an industrial cutting..
  • Precision Cutting: Our metal sheet cutter has positioning groove to help you cut in an accurate way..
  • Applicable Materials: Suitable for sheet metal with a thickness of less than 1mm. Do not try to cut stainless steel and carbide, unless it is less than 0.5mm. If you have trouble with cutting, please contact us..
Check Stock