Soapow 2x2 HDMI- Compatible Video Wall Controller 4K x 2K HD Display with Remote Control 2x2/ 1x2/ 1x3/ 1x4/ 2x1/ 3x1/ 4x1 4K 1080P

  • This video wall controller is of wide compatibility, thus it supports any TV as long as it is equipped with a HD input..
  • Neither the 5 transmitters nor the receiver box require a power source and no additional software or internet connection is required..
  • It supports 1HD Multimedia Interface input and 4 outputs of this type, which combines 4 video display units into a large dynamic image screen..
  • Simple operating procedures, porous convection heat dissipation design and non-slip design are good reasons for you to choose it..
  • It supports splicing modes like 2x2 splicing, 1x2 splicing, 2x1 splicing, 1x3 splicing, 1x4 splicing, 4x1 splicing, 3x1 splicing.
Check Stock

070 Video Wall Controller Portable 2x2 Video Wall Controller 1080P at 60HZ HD Display 180 Degree Rotate 8 Display Modes HD TV 1080P Matrix Controller for PC(#3)

  • It supports 1HD Multimedia Interface input and 4 outputs of this type, which combines 4 video display units into a large dynamic image screen..
  • Simple operating procedures, porous convection heat dissipation design and non-slip design are good reasons for you to choose it..
  • It supports splicing modes like 2x2 splicing, 1x2 splicing, 2x1 splicing, 1x3 splicing, 1x4 splicing, 4x1 splicing, 3x1 splicing.
  • Neither the 5 transmitters nor the receiver box require a power source and no additional software or internet connection is required..
  • This video wall controller is of wide compatibility, thus it supports any TV as long as it is equipped with a HD input..
Check Stock

Goldenrod (405) Fence Stretcher-Splicer

  • Features a controlled release holding ratchet to reduce line stress when wire is released.
  • Quickly tighten any fence - high tensile, barbed, or smooth wire.
  • When splicing wire, the tool holds the ends in place so both hands are free to make the splice.
Check Stock

BTER 2 x 2 HDMI Video Wall Controller, 4 Channel HD TV Wall Controller Processor Supports 2X2, 1x2, 2x1, 1x3, 3x1, 1x4, 4x1 Splicing, Portable Professional Video Wall Processor for 4 TV Splicing(US)

  • ...finition image signal into 4 blocks and assign them to 4 video display units: Assign 1 HDMI input signal source(PC, laptop, computer, etc.) to 4 HDMI outputs (LCD TV, Rear projection, Monitor, etc.), and forming an attractive large moving image video wall..
  • 【MULTIPLE DISPLAY MODES】This 2x2 hdmi switcher supports splicing modes like 2x2 splicing, 1x2 splicing, 2x1 splicing, 1x3 splicing, 1x4 splicing, 4x1 splicing, 3x1 splicing, which combines 4 video display units into a large dynamic image screen. It meets a variety of splicing needs and has a significant role in the field of shopping mall video exhibition, security..
  • 【EASY OPERATION】This 2x2 hdmi matrix switcher features simple operating procedures. Neither the 5 transmitters nor the receiver box require a power source and no additional software or internet connection is required. Plug and play, no driver needed. And the porous convection heat dissipation design and non-slip design are good reasons for you to choose it..
  • 【HD DISPLAY & REMOTE CONTROL】This video splitter supports HD input and output display. It also supports remote control, so You can control the screen effect display by remote control with one button. This video wall controller is of wide compatibility, thus it supports any....
Check Stock

FCOUIID Marine Rope Splicing Spike FID with Wood Handle Swedish Style 304 Stainless Steel for Line Wire Diameter Large 1 and up

  • Stainless steel splicing spikes are used for splicing wire rope to make attachments and loops, high quality, fids make rope or line splicing easier....
  • Sanded smooth beechwood handle ensure a good touch feel during application..
  • This Splicing Fid / Spike has 3 sizes for sale, that covered rope diameter from 1/8 inche to 1" and up..
  • Notice: Package only include 1 splicing fid. Please choose the proper size according to your application..
Check Stock

WAGO 221 Lever-Nuts 75pc Wire Connector+ 25 pc Zip Ties Assortment Pack with Case 25x 221-412 25x 221-413 25 X 221-415 25X Zip Ties

  • [EXTREMELY EASY TO USE]: You can open WAGO’s splicing connectors easily and quickly. Opening the levers on the 221 Series takes very little effort. This means you can connect conductors quickly – and without any tools! While you are connecting the conductor, recessed handles on the sides ensure an easy, secure grip on the connector..
  • [PERFECT SPECIFICATIONS]: The lever nuts accommodate stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG). Ratings up to 32 A/450 V and 105°C maximum continuous operating temperature allow the 221 Series Splicing Connectors to be used at ambient temperatures up to 85 °C (T85), making them ideal for small and large loads. Furthermore, approvals like ENEC or UL allow them to be used in worldwide applications..
  • [MINIMALIST DESIGN] The new Wago 221 series wiring connectors are 40% smaller than the 222 series, helping to further reduce space inside junction boxes. The compact, tool-less design is a great way of connecting cables. They are suitable for use with stranded and solid cables and are ideal for use in domestic or industrial wiring..
  • [TWO TEST SLOTS] With the new 221 Series Splicing Connectors, you can now test the voltage from two different sides – even wh....
Check Stock

251 Pieces Dangle Nail Charms with Nail Piercing Tools Hand Drill Set 100 Gold Dangle Nail Beads and 150 Open Jump Rings Pierced Nail Art Supplies Nail Piercing Tool Hand Drill for Acrylic Nails DIY

  • Nail piercing tools: our kit contains 100 pieces gold beads and 150 pieces 3 mm open jump rings in gold color and 1 piece nail piercing tool hand....
  • Portable and durable: these dangle nail art beads and nail jewelry rings are made of light alloy metal with electroplating craftsmanship, they are....
  • Functional nail piercing tool: the package also provides a hand drill tool to pierce the nail.
  • Please slowly rotate counterclockwise when splicing the....
  • DIY piercing nail decorations: the open jump rings and beads can be combined together or just wear the nail rings separately to decorate you nails,....
  • Various applications: the nail art dangle charms with piercing tool set are ideal for nail art DIY at home or for salon use, you can invite your....
Check Stock

labwork-parts Left Console Grill Dash AC Air Vent fit for BMW 5 Series 520 523 525 528 530 535 New

  • New Left Console Grill Dash AC Air Vent For BMW 5 Series 520 523 525 528 530 535.
  • Correct Connector No cutting or splicing.
  • nstructions not included, Tool not included.
Check Stock

Dorman 926-084 Knock Sensor And Harness Kit Compatible with Select Models

  • Complete solution - this knock sensor kit includes two knock sensors and the wiring harness that connects them.
  • Plug-and-play installation - matches original wiring harness, requiring no cutting or splicing.
  • Quality assured - benchmarked against original components for performance and quality.
  • Excellent value - original equipment quality at significant cost savings.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock

Glarks 220Pcs Non-Insulated Butt Connectors Assortment Kit 22-16/16-14/14-12/12-10 AWG Gauge Seamless Uninsulated Electrical Wire Ferrule Cable Crimp Terminal Kit for Electrical Splice DIY

  • ☆【Product Material:】All the non-insulated butt connectors are made of high quality red copper, has good electrical conductivity. with tin plated on the surface, make them has a better anti-oxidation and corrosion resistance performance, durable enough for your work..
  • ☆【High Performance:】These butt connectors easy to connect with electrical wire and strengthen its reliability and safety.
  • Wire stop structure is conductive to insertion wire in right space to ensure the effect of compression..
  • ☆【Easy Splicing:】These butt connectors are non-insulated, with wire stop barrier on center. You just need a crimping tool will make the splicing very simple, crimping ,solder and heat shrink for a grade A splice..
  • ☆【Package Include:】In this set, It include 80pcs 22-16AWG, 80pcs 16-14AWG, 30pcs 14-12AWG, 30pcs 12-10AWG total 220pcs Non-Insulated Butt Connectors packed in a plastic box, easy to store and carry..
  • ☆【Function and Use:】These butt connectors are works good when building custom wire harnesses or making repairs to existing wiring..
Check Stock

Dorman 645-997 High Temperature Lighting Harness Compatible with Select Models

  • Ideal replacement - this headlight socket matches the fit and terminal count of the original equipment socket.
  • Durable construction - made of quality materials with corrosion-resistant electrical contacts.
  • Cost-effective solution - replaces only the damaged socket by splicing into existing vehicle wiring.
  • Quality tested - this part has undergone testing to ensure a quality fit and long service life.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock

Dovetail Marker Aluminum Dovetail Guide Marking Gauge Wood Dovetail Tool for Plate Splicing and Crack Repair

  • WIDE APPLICATION-- Woodworking auxiliary tool for plate splicing, crack repair, rectangular connection..
  • HIGH ACCURACY-- Accuracy manufacturing, accurate scales, quality assurance..
  • EASY OPERATION-- Easy to use, ideal for woodworking and carpenters, greatly improve your work efficiency..
  • GOOD PERFORMANCE-- Compact and practical design makes it work more steadily..
  • HIGH QUALITY-- Good helper for your works, high quality, simple operation..
Check Stock

Signal fire New Model AI-9 Fusion Splicing Six Motor Core Alignment Fiber Fusion Splicer Automatic FTTH Fiber Optical Welding Splicing Machine Splicing 5S Heating15S

  • 【Faster Splicing & Heating】- The fusion splicing machine uses a powerful high-speed motor that allows fast 5 second splice time and 15 second heat time, continuous splice and heats about 240 times. And it saving engineers time..
  • 【3-in-1 Fiber Holder】- 3 In 1 Fiber Holder suit for SM(G. 652&G. 657)、MM (G. 651)、DS(G. 657)、NZDS (G. 655), bare fiber, pigtail, rubber-insulated, multi fiber cable.
  • Splice Loss: 0.025dB (SM) 、0. 01dB (MM) 0. 04dB (DS/NZDS)..
  • 【Built-In Power Meter & VFL】- Using the latest core alignment technology with auto-focus and six motors. It is more precise and less splicing loss than cladding alignment technology. Effectively measure connection loss,verify continuity and help assess fiber link transmission quality..
  • 【Clear LCD & Long Time Standby】- With 5-inch high-resolution screen, it is up to 300 times the focus magnifications when X/Y Axis displayed separately, 150 times focused magnifications when X/Y Axis Displayed Simultaneously. 7800 mah high-capacity lithium battery, charging time ≤ 3.5 hours, continuous splicing and heating about 240 times..
  • 【Intelligent Interaction】- This splicing heating machine can be connected to mobile app, ten different languages can be switched lito English, French, Russia, I....
Check Stock