Categories

Best Split Bearing

L-A M10 Stainless Steel Split Lock Spring Washers Screw Gasket, 18-8 (304) Stainless Steel, 0.39\ID，(100Pcs)

  • Split Lock washers apply greater bolt tension per unit of applied torque as well as a hardened bearing surface adding to a more uniform torque control.These lock washers resist loosening caused by vibration and corrosion..
  • Package Content : 100x Split Lock Washer.
Check Stock

Lews Fishing American Hero Camo Speed Spin Spinning Combo 6.2 1 Gear Ratio 31 Retrieve Rate 6 2pc Medium Power Ambidextrous

  • Speed Lube for exceptional smoothness and performance in all weather conditions.
  • Lew’s exclusive graphite skeletal reel seat.
Check Stock

Split Clarinet Holder, Clarinet Stand, Polished Toes for Beginner Professionals Instrument Lovers Bands

  • Using split design, detachable metal stand, can be split, can be folded, convenient to store, waterproof, corrosion resistant..
  • It adopts spiral knob design, the whole bracket can be folded and can be directly put into the mouth of the instrument..
  • The bottom is made of five‑leg metal material, which is stable and durable, not easy to fall, and has strong bearing capacity..
  • The tower structure can penetrate the bell mouth and reduce the shaking of the clarinet..
  • The toes have been polished to avoid metal damage and scratches on the wooden floor..
Check Stock

The Hillman Group 300321 5/8-Inch Split Lock Washer Grade 8, 25-Pack

  • This Split Lock Washer Provides A Circular Bearing Surface With Offset Split Ends Which Help Bite Into The Mating Material To Provide A Locking Feature When Tightened Beneath A Nut, It Is Round With A Hole In The Center And Can Be Used Where Loosening From Corrosion Or Vibration Is A Concern, Lock Washers Are Commonly Used In Any Application Using A Bolt Where Two Pieces Are Being Drawn Together.
  • Used In Applications With Like Nuts And Bolts Of Similar Diameter As Well As Screw Products.
  • These Fasteners Resist Loosening Caused By Vibration And Corrosion.
Check Stock

ASUS GeForce RTX 2080 Ti O11G Dual-fan OC Edition GDDR6 HDMI DP 1.4 USB Type-C graphics card (DUAL-RTX2080TI-O11G) (Renewed)

  • Powered by NVIDIA Turing with 1560 MHz Boost Clock (OC Mode) featuring 11GB GDDR6 352-bit memory and 4352 CUDA cores.
  • Supports up-to 4 monitors with DisplayPort 1. 4, HDMI 2. 0 and a VR headset via USB Type C ports.
  • 8mm dual-ball Bearing fans and cutting-edge shroud provide superior cooing and Airflow, All while being quiet, efficient, and having 2x the lifespan compared to traditional Sleeve bearing fans..
  • 144 Hour validation program ensures the best stability of your GPU through rigorous and extensive testing with heavy workloads..
  • Gpu Tweak II makes monitoring performance and streaming in real time easier than ever, and includes additional software like Game Booster, X Split Game caster, WT Fast and Quantum Cloud dual-ball Bearing fans provide superior airflow, All while being quiet, efficient, and having 2x the lifespan compared to traditional Sleeve bearing fans..
Check Stock

M8 Stainless Steel Split Spring Lock Washers, 8mm ID, 12mm OD,18-8 (304) Stainless Steel, 150pcs (M8)

  • Package Included: 150 x Split Lock Washers. Inner Dia: 0.31" / 8mm.
  • Split Lock washers apply greater bolt tension per unit of applied torque as well as a hardened bearing surface adding to a more uniform torque control. .
  • These lock washers resist loosening caused by vibration and corrosion..
  • Washer's surface are smooth can reduces friction between the fasteners, preventing isolates, preventing loosening and dispersion pressure..
  • Ideal for electrical connections on household and commercial appliances, automotive and marine uses in which the power source has a threaded/bolt-type connection..
Check Stock

DAYUAN 12pcs Bearing Separator Puller Set, Heavy Duty 5 Ton Capacity 2\ and 3\ Bearings Splitters Puller Kit

  • Practical: Use the Bearing Separator Set, 5-Ton Capacity – Bar-Type Bearing Splitter, Gear Puller, Fly Wheel Separator 12-Piece Kit when you need to separate bearings on your vehicle, ATV, snowmobile, and more.
  • Versatile: For a wide variety of pulling jobs.
  • Can remove bearings from a shaft, split bearings, and separate flywheels.
  • Can be used separately or with other pullers or tools.
  • Durable: Each piece in this set is drop forged and heat treated for extra strength and longevity.
  • Black oxide finish for corrosion resistance.
  • Easy Storage: Heavy-duty 15” x 9.7” x 2” (38cm x 24.6cm x 5cm) blow-mold case with handle and latches for secure storage, easy transportation, and organization.
  • Contents: 12-piece package includes 4-piece 4” (10cm) and 4-piece 5” (12.7cm) hex push-puller legs, 1-piece 2” (5cm) and 1-piece 3” (7.6cm) bearing separator jaws or splitters, 1-piece 5” (12.7) puller cross bar with 1-piece 6-1/4” (15.9cm) forcing screw.
Check Stock

Century 2 HP Pool and Spa Pump Motor, Permanent Split Capacitor, 3450 Nameplate RPM, 230 Voltage, 56Y Frame - B855

  • SQUARE-FLANGE MOUNTING: Single-phase pump motor is a part of the Century pool and spa pump motors with Square Flange series.
  • CONTINUOUS OPERATION: Features a permanent split capacitor and a switchless design.
  • SEALED BALL BEARING: Stainless steel threaded shaft with sealed ball bearing with a 50-degree Celsius ambient temperature.
  • THERMAL PROTECTION: Motor features automatic thermal protection and non-reversible counterclockwise pump end.
  • FEATURES: Includes a 56Y frame-square flange and open drip-proof ball bearings.
Check Stock

M10 Stainless Steel Split Spring Lock Washers 10mm ID 16mm OD,18-8 304 Stainless Steel 100pcs M10

  • Package Included: 100 x Split Lock Washers. Inner Dia: 0.39" / 10mm.
  • Split Lock washers apply greater bolt tension per unit of applied torque as well as a hardened bearing surface adding to a more uniform torque control. .
  • These lock washers resist loosening caused by vibration and corrosion..
  • Washer's surface are smooth can reduces friction between the fasteners, preventing isolates, preventing loosening and dispersion pressure..
  • Ideal for electrical connections on household and commercial appliances, automotive and marine uses in which the power source has a threaded/bolt-type connection..
Check Stock

Orion Motor Tech OMT Blind Hole Collet Bearing Race and Seal Puller Extractor Kit Slide Hammer Pilot Insert Inner Bearing Removal Tool Set 16 Pieces

  • 16-PIECE SET: This blind bearing puller set by Orion Motor Tech includes a slide hammer, counterstay puller, spare pin bolt, 3 screw adapters, and 10 split collets to get all your work done on parts from 1/4 to 2-1/3 inch diameter (6-59 mm).
  • HEAVY-DUTY CONSTRUCTION: These wheel bearing removal tools are made from AISI 1045 medium carbon steel forged and galvanized for long-term durability under even punishing use.
  • the collets in particular are chromoly steel to handle even the most stubborn blind bearings and bushings without trouble.
  • WIDE APPLICATION: This internal bearing puller set's expandable collets and threaded screw adapters remove tight and jammed axles, bearings, and bushings on a wide variety of vehicles without damaging the removed parts.
  • EASY TO USE: For most parts, just fit the appropriate collet, lock it into the inner race, and pull the slide hammer's weight back to easily knock out the bearing or bushing.
  • for tighter or more delicate operation, the counterstay can be slowly tightened to more carefully extract the part.
  • BLOW-MOLDED CASE: The custom blow-molded case keeps everything organized and easy to carry or store as needed.
Check Stock

Lew's (LLS10066UL-2) Laser Lite Spinning Reel and Fishing Rod Combo, 6-Foot 6-Inch 2-Piece IM6 Graphite Blank, Size 100 Reel, Right or Left-Hand Retrieve, Silver

  • Speed Lube for exceptional smoothness and performance in all weather conditions.
  • Graphite reel seat with cushioned stainless steel hood.
Check Stock

ABN Bearing Separator Set, 5-Ton Capacity – Bar-Type Bearing Splitter, Gear Puller, Fly Wheel Separator 12-Piece Kit

  • Practical: Use the ABN Bearing Separator Set, 5-Ton Capacity – Bar-Type Bearing Splitter, Gear Puller, Fly Wheel Separator 12-Piece Kit when you need to separate bearings on your vehicle, ATV, snowmobile, and more.
  • Versatile: For a wide variety of pulling jobs.
  • Can remove bearings from a shaft, split bearings, and separate flywheels.
  • Can be used separately or with other pullers or tools.
  • Durable: Each piece in this set is drop forged and heat treated for extra strength and longevity.
  • Black oxide finish for corrosion resistance.
  • Easy Storage: Heavy-duty 15” x 9.7” x 2” (38cm x 24.6cm x 5cm) blow-mold case with handle and latches for secure storage, easy transportation, and organization.
  • Contents: 12-piece package includes 4-piece 4” (10cm) and 4-piece 5” (12.7cm) hex push-puller legs, 1-piece 2” (5cm) and 1-piece 3” (7.6cm) bearing separator jaws or splitters, 1-piece 5” (12.7) puller cross bar with 1-piece 6-1/4” (15.9cm) forcing screw.
Check Stock

Orion Motor Tech OMT Blind Hole Collet Bearing Race and Seal Puller Extractor Kit Slide Hammer Pilot Insert Inner Internal Bearing Removal Tool Set 16PCS

  • 1.16-PIECE SET: This blind bearing puller set by Orion Motor Tech includes a slide hammer, counterstay puller, spare pin bolt, 3 screw adapters, and 10 split collets to get all your work done on parts from 1/4 to 2-1/3 inch diameter (6-59 mm).
  • 2.HEAVY-DUTY CONSTRUCTION: These wheel bearing removal tools are made from AISI 1045 medium carbon steel forged and galvanized for long-term durability under even punishing use.
  • the collets in particular are chromoly steel to handle even the most stubborn blind bearings and bushings without trouble.
  • 3.WIDE APPLICATION: This internal bearing puller set's expandable collets and threaded screw adapters remove tight and jammed axles, bearings, and bushings on a wide variety of vehicles without damaging the removed parts.
  • 4.EASY TO USE: For most parts, just fit the appropriate collet, lock it into the inner race, and pull the slide hammer's weight back to easily knock out the bearing or bushing.
  • for tighter or more delicate operation, the counterstay can be slowly tightened to more carefully extract the part.
  • 5.BLOW-MOLDED CASE: The custom blow-molded case keeps everything organized and easy to carry or store as needed.
Check Stock