Categories

Best Split Ender Before And After

HICTOP Ender 3 pro Upgrades Glass Bed Double Sided Upgraded Tempered Glass Bed 235x235 for Ender 3 Ender 3 Pro Ender 5 CR-20 Pro 3D Printer (235 * 235)

  • HICTOP Ender 3 pro glass bed is coated on both sides and both sides can be used. Buying one plate gets you two usable sides, doubling your value.
  • Excellent adhesion when the temperature of the heated bed is about 50℃, you can print directly on the HICTOP glass bed without using any glue or other tools to help the model to stick on to the bed. You do not need to worry about the prints curling if the temperature of the hot bed is no less than 50℃.
  • It is super easy to remove the models when the temperature of the glass goes back to room temperature, you do not need to use removal tools even if you are printing big model on our HICTOP glass bed. Please do not try to remove the model before the plate cools to room temperature.
  • The size of HICTOP glass bed is 235*235mm（9.25*9.25inch）, it can work with Creality 3D printers such as the Ender-3 Pro, Ender-3 V2，Ender-3, Ender-3S, Ender-3X, Ender-5, Ender-5 Pro，CR-20, CR-20 Pro and other similarly sized printers.
  • The surface of HICTOP glass bed is smooth without ripples, and there is no residue after the model is removed, it is also more durable than a superplate surface.
Check Stock

UniTak3D Ender 3 Direct Drive Upgrade Kit Conversion Bracket Compatible with Creality Ender 3 V2,Ender 3 Pro and Voxelab Aquila 3D Printer Dual Gear Extruder&Bowden Extruder

  • 【Application】:The direct drive upgrade kit is suitable for Ender 3 V2,Ender 3 Pro,Ender 3,Voxelab Aquila 3D printers,NOT compatible with Ender 3 Max,Ender 3 Neo,Ender 3 V2 Neo,NOT compatible with TITAN extruder..
  • 【Outstanding Extrusion Control】:A direct drive extruder improves extrusion and retraction by removing the need for the Bowden (PTFE) tube. It provides precise retraction and a better print result..
  • 【Stable Operation】:The holes of the Split Type conversion bracket are perfectly aligned, with supports on both sides to keep the center of gravity in the middle, and the structure is more stable..
  • 【Flexible Filament Supported】: Compared with bowden extrusion,this direct drive extrusion greatly improves print quality of TPU and other flexible materials..
  • 【Easy Installation】:No X,Y or Z-axis build volume lost. No firmware or wiring modification.Just tear down the original Ender 3 series plate and mount this direct drive upgrade kit..
Check Stock

HICTOP Upgraded New Version Ender 3 pro Glass Bed One Side Tempered Glass Bed 235x235 for Ender 3 Ender 3 Pro Ender 5 CR-20 Pro 3D Printer (235 * 235)

  • HICTOP Ender 3 pro glass bed is coated on one side and the coat material is better than the both sides one, it is much more stable and not easy to remove. We can send you new one for free if it peels off in 3 monthes.
  • Excellent adhesion when the temperature of the heated bed is about 50℃, you can print directly on the HICTOP glass bed without using any glue or other tools to help the model to stick on to the bed. You do not need to worry about the prints curling if the temperature of the hot bed is no less than 50℃.
  • It is super easy to remove the models when the temperature of the glass goes back to room temperature, you do not need to use removal tools even if you are printing big model on our HICTOP glass bed. Please do not try to remove the model before the plate cools to room temperature..
  • The size of HICTOP glass bed is 235*235mm（9.25*9.25inch）, it can work with Creality 3D printers such as the Ender-3 Pro, Ender-3 V2，Ender-3, Ender-3S, Ender-3X, Ender-5, Ender-5 Pro，CR-20, CR-20 Pro and other similarly sized printers..
  • The surface of HICTOP glass bed is smooth without ripples, and there is no residue after the model is removed, it is also more durable than a super plate surface..
Check Stock

LEGO Minecraft Micro World - The End 21107 (Discontinued by manufacturer)

  • Experience The End, a new biome in the LEGO Mine craft micro-world, Includes the Ender Dragon and 4 Enderman Micro mob.
  • Recreate a Mine craft world as a micro-scale LEGO model.
  • Split the model into 4 sections for a new play experience.
  • Destroy the Ender Crystals! Slay the fearsome Ender Dragon!.
  • Combine this biome with others in the same series to build your own LEGO Mine craft world.
Check Stock

Bonide (BND068) - Sedge Ender Weed Control Concentrate, Ready to Use Weed Killer (32 oz.)

  • KILLS WEEDS, NOT THE LAWN - Sedge Ender Weed Control kills yellow nutsedge, crabgrass, goosegrass, foxtail, and other grassy weeds down to their roots without harming your lawn..
  • COMPLETE GRASS COVERAGE - Safe to use on both warm and cool-season grasses such as bluegrass, ryegrass, fescue, Bermuda grass, and carpetgrass..
  • POST EMERGENT CONTROL - The product is designed for application before or after weeds have sprouted. It kills the roots and shoots of existing weeds while preventing the growth of newly emerged weed seedlings..
  • WON'T WASH AWAY - Our herbicide spray starts working on contact and is rainproof within hours. For best results, apply with enough time for it to completely dry before it rains. Will not wash off after it has dried..
  • EXPANSIVE COVERAGE - Bonide Sedge Ender Weed Control is an incredibly economical offering. One pint can treat 2,000 to 8,700 square feet, and this product comes in a ready-to-spray bottle that is easy to assemble, so it can be used once it arrives..
Check Stock

Creality Ender CR Touch Auto Bed Leveling Sensor Kit, Upgrade Low Noise and More Durable Than BL Touch, for 3D Printer Ender 3 Ender 3 V2 Ender 3 Pro Ender 5 Ender 5 Pro

  • ...y 3D printers. CR Touch works with Ender 3/Ender 3 V2/Ender3 Pro/Ender 3 Max/Ender 3S/Ender 5/Ender 5 Pro/CR 10 V3/CR-10. It should be noted that it is only applicable to 32-bit V4.2.2/V4.2.7 motherboard 3D printers. This CR Touch does not work for 8-bit motherboards, please clarify what version your motherboard is before buying..
  • 【Easy Installation】First, choose the appropriate mounting bracket according to your printer, and install this CR Touch auto-leveling kit to your 3D printer. Download the CR Touch program from the Crealtiy official website and copy it to the TF/SD card. Insert it directly into the card slot of the 3D printer. Turn on the power, and the program can be updated intelligently after the power is turned on..
Check Stock

Creality CR Touch Auto Bed Leveling Sensor Kit. Creality Official Specially Designed for Ender 3 v2/ Ender 3/ Ender 3 Pro/Ender 5/Ender 5pro/CR10 for 32 Bit V4.2.2/V4.2.7 Mainboard 3D Printer

  • 【After-sales Service】 Life-time professional technical supports,If you encounter unsolvable problems during installation and use, please feel free to contact us, our after-sales technical team will provide you with detailed solutions within 24 hours..
  • 【Easy to Install and Use】The kit contains 3 different mounting brackets and extension cords. You can easily install.
  • 【Product Durability】 Creality CR Touch is specially designed for 3d bed leveling for Creality 3d printers. Compared with BL Touch, it has stable quality, long service life, and can be reused more than 100,000 times..
  • 【Creality ideal companion】CR Touch works for Ender3 v2/Ender3/Ender3s/Ender3 Pro/Ender 3 Max/Ender5/Ender5 Pro/Ender5 s/ CR 10 with 32 bit motherboard.(3d printer accessory with the best experience).
  • 【Strong compatibility】CR Touch 3d printer auto leveling,Compatible with PEI / sticker bed / glass bed / metal bed.
Check Stock

Original Creality Ender 3 V2 Filament Runout Sensor Smart Filament Sensor Break Detection Module Detector for Ender 3 pro Ender 6 CR-10S PRO CR10 V2 V3 Ender3 Max 3D Printer

  • Only used for 32bits motherboard like version 4.2.2, 4.2.7. Suitable for Ender 3/ Ender 3 V2/ Ender 3 pro / Ender 6 / CR-10S PRO/ CR-10 V2 V3/ENDER 3 MAX. But the installation bracket is only used for Ender 3 series, as Ender 6 and cr10s pro printer already have the sensor installation holes or bracket.
  • Independent Modularized Design: it is redesigned with new inner structure. The outer cover is frosted, making it stylish and unique.
  • Filament breakage detection device contains micro switch, using the principle of mechanical proximity switch, no friction, can ensure the smooth feeding of filaments..
  • Precise Detection: Blue LED indicates normal filament feed-in.
  • Blue LED turns off when filament runs out..
  • IMPORTANT: For Ender 3 V2, Ender 3 and Ender 3 pro, you need to flash your motherboard's firmware before using, about the firmware download way, please check the following description or the instrument in the pack. as Ender 6 and CR10S PRO printer's firmware has been setted with filament detection function, so you can use them directly..
  • Package: 1 filament detector sensor, 1 extended cable, 1 installation bracket(This bracket is only used for Ender 3 / V2 / Pro, Filament detection bracket or holes already set up in the Ender 6 and CR10S PRO).
Check Stock

2022 Official Sprite Direct Drive Extruder Pro Kit with 80N Stepper Motor, Direct Drive Upgrade Kit for Creality Ender 3 pro, Ender 3, Ender3v2, Ender 3 Max, Support TPU Filament

  • ...It doesn’t affect the inherent function of printer because it is a complete extrusion kit. Comes with a long extruder motor connection cable, tools, accessories and wiring diagram instructions for installation and easy assembly. Note: There is a red cable with blue label on Sprite "Please insert into adapter before using" ..
  • [After-sales Service] Life-time professional technical supports,If you encounter unsolvable problems during installation and use, please feel free to contact us, our after-sales technical team will provide you with detailed solutions within 24 hours..
Check Stock

Micro Swiss Direct Drive Extruder for Creality Ender 5

  • 【Official New Product from Creality】Sprite Extruder Pro Upgrade Kit enables all Ender 3 series 3D printers to have direct extrusion and high temperature printing conditions..
  • 【Better new design】Simulation of flow field mechanics and dual fan design results in powerful heat dissipation function and more stable model formation..
  • 【Double gear feeding, stable and reliable】The double tooth structure does not damage the consumables, and the feeding is more reliable and stable. Reduces the chance of clogged nozzles when retracting consumables and failures when loading new consumables. Full metal hot end kit with heating block, titanium throat and cooling block, allowing you to print high temperature materials up to 300°C..
  • 【Easy to install, more adaptable】Adaptable, Ender 3/Ender 3 V2/Ender 3 Pro/Ender 3 S1/Ender 3 Max/CR-10 Smart Pro 3D Printers, easy to install and use. It does not affect the inherent nature of the printer function as it is a complete extrusion kit. Comes with a long extruder motor connection cable, tools, accessories and wiring diagram instructions for installation and easy assembly..
Check Stock

Official Creality Ender 3 V2 Filament Runout Sensor, Smart Filament Break Detection Detector for Ender 3, Ender 3 Pro, Ender3 Max，Ender 5 Plus with 32 Bit V4.2.2/V4.2.7 Motherboard

  • 【High Compatible】 Suitable for Ender 3/ Ender 3 V2/ Ender 3 pro /Ender 3 MAX/Ender 5 Plus/ CR-10S PRO/ CR-10 V2 V3 with 32 bit V4.2.2/V4.4.7. Only Ender 3 Series need to replace extruder bracket..
  • 【Smooth filament travelling】 The filament sensor has a built-in filament guider, which is made of metal material with smooth surface, reducing friction resistance and ensuring smooth filament feed-in..
  • 【Precise Detection】 Blue LED indicates normal filament feed-in, when the Blue LED turns off, it means filament runs out..
  • 【Upgraded Design】It is redesigned with new inner structure. The outer cover is frosted, making it stylish and unique..
  • 【After Sales Service】Creality pays great attention to the buyer’s user experience. If you have unsolvable problems during installation and use, please feel free to contact us, our after-sales technical team will provide you with detailed solutions within 24 hours..
Check Stock

Split Ender Pro Professional Tool Salon Automatic Split End Remover Hair Trimmer for Dry Damaged and Brittle Split Ends for Men and Women - Red

  • 【Easy to Use】 Rid your hair of split ends faster and safer with the Split Ender..
  • 【For all types of hair】 Designed for frizzy, curly, straight, thick or thin hair as long as the hair is chin length or longer. Frizzy hair may....
  • 【Rechargeable Battery included】 Power Adaptor: Bi-Volt 110-240 Volts. Use plugged in or wireless. Charge the battery before use for 3 to 4 hours.....
  • 【New and Sealed】 Easy to open packaging. Product requires Fully Charged Battery in order to work as intended. Thanks to the user manual, the buyer....
  • 【Ideal Gift & One-Year Warranty】 This hair trimming device is the best gift for any family member or close friend. We provide a 1 Year Warranty so....
Check Stock

ANYCUBIC Vyper 3D Printer Auto Bed Leveling 3th Gen Upgrade FDM Metal FDM 3D Printers with TMC2209 32-bit Silent Driver Fast 3D Printing Large Build Size 9.6 x 9.6 x 10.2 Easy Assembly

  • 【After-sales Service】 Life-time professional technical supports,If you encounter unsolvable problems during installation and use, please feel free....
  • 【Easy to Install and Use】The kit contains 3 different mounting brackets and extension cords. You can easily install.
  • 【Product Durability】 Creality CR Touch is specially designed for 3d bed leveling for Creality 3d printers. Compared with BL Touch, it has stable....
  • 【Creality ideal companion】CR Touch works for Ender3 v2/Ender3/Ender3s/Ender3 Pro/Ender 3 Max/Ender5/Ender5 Pro/Ender5 s/ CR 10 with 32 bit....
  • 【Strong compatibility】CR Touch 3d printer auto leveling,Compatible with PEI / sticker bed / glass bed / metal bed.
Check Stock