Martin 1008 5/8 Taper Bushing, Sintered Steel, Inch, 0.62\ Bore, 1.386\ OD, 0.875\ Length
- Taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
- Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
- Sintered steel for greater strength and resistance to wear than steel.
- Keyed to the shaft to prevent the shaft from rotating in the bushing.
- Interchangeable with taper bushings from various manufacturers.
Check StockMartin 2517 2 7/16 Taper Bushing, Sintered Steel, Inch, 2.44\ Bore, 3.375\ OD, 1.75\ Length
- Taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
- Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
- Sintered steel for greater strength and resistance to wear than steel.
- Keyed to the shaft to prevent the shaft from rotating in the bushing.
- Interchangeable with taper bushings from various manufacturers.
Check StockMartin 2517 1 1/4 Taper Bushing, Sintered Steel, Inch, 1.25\ Bore, 3.375\ OD, 1.75\ Length
- Taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
- Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
- Sintered steel for greater strength and resistance to wear than steel.
- Keyed to the shaft to prevent the shaft from rotating in the bushing.
- Interchangeable with taper bushings from various manufacturers.
Check StockMartin 2012 1 5/8 Taper Bushing, Sintered Steel, Inch, 1.63\ Bore, 2.75\ OD, 1.25\ Length
- Taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
- Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
- Sintered steel for greater strength and resistance to wear than steel.
- Keyed to the shaft to prevent the shaft from rotating in the bushing.
- Interchangeable with taper bushings from various manufacturers.
Check StockMartin 2012 1 1/8 Taper Bushing, Sintered Steel, Inch, 1.13\ Bore, 2.75\ OD, 1.25\ Length
- Taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
- Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
- Sintered steel for greater strength and resistance to wear than steel.
- Keyed to the shaft to prevent the shaft from rotating in the bushing.
- Interchangeable with taper bushings from various manufacturers.
Check StockMartin SH 1 Quick Disconnect Bushing, Sintered Steel, Inch, 1\ Bore, 1.871\ OD, 1.31\ Length
- Quick disconnect bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
- Split through flange and taper to provide strong clamping on the shaft.
- Sintered steel for greater strength and resistance to wear than steel.
- Keyed to the shaft to prevent the shaft from rotating in the bushing.
- Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads.
Check StockMartin JA 1 Quick Disconnect Bushing, Sintered Steel, Inch, 1\ Bore, 1.375\ OD, 1.06\ Length
- Quick disconnect bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
- Split through flange and taper to provide strong clamping on the shaft.
- Sintered steel for greater strength and resistance to wear than steel.
- Keyed to the shaft to prevent the shaft from rotating in the bushing.
- Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads.
Check Stock
KELEN Power Steering Pump Pulley Puller, Power Steering Pulley Puller/Installer, 12Pcs Power Steering Pulley Remover and Installer Set for Water Pump, Vacuum Pump Pulley Puller
- Power steering pulley puller and installer kit is used for removing and installing pressed-on alternator ,power steering pump and other pulleys..
- The pulley puller and installer kit is compatible with Late GM, Ford & Chrysler Engines,includes special adapters for GM 3.2 Quad 4 engines and Ford Modular engines..
- Power steering pump pully puller is made of high carbon steel, long lasting and durable construction for a long service life.The power steering pulley remover and installer set is a must have kit for professional and home DIY mechanics..
- The power steering pulley puller/installer equipped with a plastic carrying case, keep all tools well organized, allows for convenient storage and transportation..
- We also know the power steering pump pully puller as power steering pulley puller tool,power steering pulley puller set,power steering pump pulley puller tool,power steering pulley remover installer,power steering pump pulley puller/installer,power steering pulley puller kit,power steering puller kit,pulley puller installer kit,pulley installer kit,pulley installer remover,power steering pump puller,and so on..
Check StockMartin SDS 2 Quick Disconnect Bushing, Ductile Iron, Inch, 2\ Bore, 2.187\ OD, 1.37\ Length
- Quick disconnect bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
- Split through flange and taper to provide strong clamping on the shaft.
- Ductile iron for greater strength than gray cast iron and resistance to wear, galling, and corrosion.
- Keyed to the shaft to prevent the shaft from rotating in the bushing.
- Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads.
Check StockMartin JA 7/16 Quick Disconnect Bushing, Sintered Steel, Inch, 0.43\ Bore, 1.375\ OD, 1.06\ Length
- Quick disconnect bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
- Split through flange and taper to provide strong clamping on the shaft.
- Sintered steel for greater strength and resistance to wear than steel.
- Keyed to the shaft to prevent the shaft from rotating in the bushing.
- Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads.
Check StockMartin SK 7/8 Quick Disconnect Bushing, Sintered Steel, Inch, 0.87\ Bore, 2.812\ OD, 1.93\ Length
- Quick disconnect bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
- Split through flange and taper to provide strong clamping on the shaft.
- Sintered steel for greater strength and resistance to wear than steel.
- Keyed to the shaft to prevent the shaft from rotating in the bushing.
- Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads.
Check Stock
TooTaci 25MM Pulley Block System for Lifting with Rope and Hooks, 2pcs 304 Stainless Steel M25 Lifting Pulley Block Cable Wire Towing Wheel,66ft Nylon Rope & 2pcs Carabiner Hook
- Pulley and Rope Kit : 2Pcs 25MM Crane pulley wheel,2Pcs x Carabiner Snap Hook Clips,20 meter Nylon Pulley Line rope.Loading 150 kg/300LB.
- M25 Pulley Block: Heavy Duty Pulley is anti-rust and wear resistance with strong structure, surface is shock light processing, whose main material is 304 stainless steel..
- Ergonomic Design : Pulleys for lifting fixed top for easily rope handling, smooth roller provides pretty good rope traverse, pulley rotation cylinder head is solid, durable, 360 degrees rotation to prevent rope from knotting.
- Pulleys for lifting with Rope and Hook: 66ft solid braided polypropylene pulley rope - extreme strong with high tenacity.
- Pulleys for Carabiner: Versatile binding, rigging & anchoring hardware - quick connect/dis-connect of ropes, chains, straps..
- Outdoor Pulley System Lifting widely use for Make an Easy Pulley System for fastening rope to flagpole, small boats, awnings, blinds,....
- As a topping lift for a portable garage door.
- Works well for bird feeder pulley system,clothesline pulley system outdoors,garage pulley system,treehouse pulley system,gym pulley system...pull and climbing ropes to raise and lower.
- Used to fit and tension a sail shade,....
- fit for steel wire rope or any strong rope,for indoor outdoor lifting application....
Check StockMartin SDS 1 1/8 Quick Disconnect Bushing, Sintered Steel, Inch, 1.13\ Bore, 2.187\ OD, 1.37\ Length
- Quick disconnect bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
- Split through flange and taper to provide strong clamping on the shaft.
- Sintered steel for greater strength and resistance to wear than steel.
- Keyed to the shaft to prevent the shaft from rotating in the bushing.
- Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads.
Check Stock
