Best Split Spherical Roller Bearing

FK Bearings COM12T 3/4 Spherical Bearing with Teflon Commercial Series, 1 Pack

• Double row spherical roller bearing for applications that support radial and oscillating axial loads.
• C3 radial clearance allows thermal expansion for continuous operating temperatures up to 200 degrees C/392 degrees F.
• Tapered bore with 1:12 taper for compensating for a flexing shaft or fitting to a tapered shaft.
• Roller-guided brass cage evenly spaces rollers for reduced friction, vibration, and noise.
• Open design, circumferential groove and three lubrication holes in the outer ring allow for lubrication in place.

5/8\ Take-up Ball Bearing Unit UCT202-10

• Standard-duty mounted spherical roller bearing with take-up block housing.
• Cast iron for rigidity and vibration damping with powder coating for resistance to corrosion.
• Set screw locking collar for secure attachment to shaft.
• Clearance seal for resistance to contaminants.

WQAZ Sealed Ball Bearings 2Pcs Guide Roller Bearing High Carbon Chrome Ball Bearings Steel Spherical Raceway Linear Bearings CNC Part Less frictional Noise (Color : Type 1)

• The bearing is made of high carbon chrome bearing steel,a kind of high strength ,high hardness material..
• The roller way is spherical raceway type..
• Well polished surface provides good smoothness and flatness..
• There are two kinds of bearing of different inner diameter for you to choose from..
• Compact and practical design makes it works more stable..

1/2\ Take-up Ball Bearing Unit UCT 201-8

• Heavy-duty mounted spherical roller bearing with take-up assembly.
• Cast iron for rigidity and vibration damping with powder coating for resistance to corrosion.
• Two set screw locking collars for secure attachment to shaft.
• Spring-loaded, heavy contact seal for resistance to contaminants.

SKF 22207 E/C3 Spherical Roller Bearing

• Shaker screen two row spherical roller bearing suitable for applications that support radial and oscillating axial loads.
• Machined brass cage spaces the rollers for even load distribution and prevents contact to reduce friction, vibration, and noise.
• P5 precision outer ring with center lubrication groove and oil holes.
• C4 radial clearance is larger than CN and C3 for applications where impact loads and vibration are severe, both the inner and outer rings are tight fitted, or thermal expansion is a factor.
• Straight bore fits conventional cylindrical shafts.

FK Bearings WSSX16T Spherical Bearing with Teflon, 1\ (1-3/8 Wide), 1 Pack

• Two row spherical roller bearing suitable for applications that support high radial and oscillating axial loads.
• Two-piece pressed steel window-type cage has high wear resistance and spaces the rollers for even load distribution and prevents contact to reduce friction, vibration, and noise.
• CN (normal) radial clearance for applications where thermal expansion is not a factor.
• Straight bore fits conventional cylindrical shafts.

SKF 22311 E/VA405 Radial Spherical Roller Bearing, 55 mm ID, 120 mm OD, 43 mm Width, Round Bore, Open, Steel Cage, C4 Clearance, 55 Steel (Replaces SKF 452311 M2 W502)

HIC 22310 Spherical Roller Bearing, 22310RW33FY HIC Roller Bearing, 50MM Straight Bore, 110MM Outside Diameter

• Two row spherical roller bearing suitable for applications that support high radial and oscillating axial loads.
• Two-piece pressed steel window-type cage has high wear resistance and spaces the rollers for even load distribution and prevents contact to reduce friction, vibration, and noise.
• C3 radial clearance is larger than normal for applications where impact loads and vibration are severe, or thermal expansion is a factor.
• Straight bore fits conventional cylindrical shafts.

Barnes 104982 Model 2SEV1022L Sewage Pump, 1 hp, 240V, 1 Phase, 2

• LARGE DISCHARGE CAPACITY: This model is designed with a maximum discharge head of 52-Feet and can pump up to 138 GPM.
• DESIGNED TO PUMP RAW SEWAGE: Our 2SEV1022L model is a submersible pump that is specifically designed to handle 2-inch spherical solids and is ideal for typical raw sewage applications.
• HANDLES SPHERICAL SOLIDS WITHOUT CLOGGING: Each pump is designed with a cast iron vortex impeller to allow for easy and effortless passage of 2-inch spherical solids without clogging or backing up.
• HEAVY DUTY SPLIT CAPACITOR MOTOR: Every pump features a powerful permanent split capacitor motor for reliable, high performance with a longer motor life and a lower amp draw.
• INDUSTRIAL GRADE: Great for commercial applications, the robust design or this pump features a corrosion resistant stainless steel shaft and hardware, heavy duty cast iron motor housing, and oil lubricated ball bearings.

FAG 22213E1AK-M-C3 Spherical Roller Bearing, Tapered Bore, Brass Cage, C3 Clearance, Metric, 65mm ID, 120mm OD, 31mm Width, 6700rpm Maximum Rotational Speed, 208kN Static Load Capacity, 200kN Dynamic Load Capacity

Bitray SA8T/K Rod End Bearing 8mm Inside Dia Male Thread Right Hand Self Lubricating Bearing - 4PCS

• ◎【MATERIAL】 The rod end body is carbon steel, the galvanized environmentally friendly white zinc gasket material is copper inner ring (copper ball) material is bearing steel, quenched, the spherical surface is hard chrome plated, and there are left and right thread..
• ◎【DIMENSION】Outside Diameter: 24mm.
• ◎【PACKAGE INCLUDEDS】4 pcs x Rod End Bearing.
• ◎【WIDELY APPLICATION】Widely used in machinery, power tools,automation equipment, CNC equipment, and so on..
• ◎【CAUTION WHEN USING】 Where the press is missing or unavailable, the end sleeve joint bearing can be installed with an assembly sleeve and a hammer. The hammering force should be evenly transmitted to the entire circumference of the end surface of the end rod joint bearing ring, so the hammered end surface of the assembly sleeve should be made spherical..

The ROP Shop | 2\ Nylon Garage Door Roller with 4\ Stem & 11-Ball 6200ZZ Precision Bearing

• The ROP Shop replacement 2" White Nylon Roller with 6200ZZ Bearing Offer Softer, Quieter Garage Door Use.
• Specs - Roller Diameter: 1 13/16" for a 2" track. Roller Thickness: 1/2". Stem Length: 4 1/8" (3.5" from bevel). Stem Diameter: 7/16". Single Load: 150lbs. Bearing Type: 6200ZZ Precision. Roller Material: Nylon. Roller Color: White. Refer to images 2 & 3 for more information.
• Rollers are constructed from nylon that is softer and quieter than plastic or metal rollers and smoother than original equipment rollers. Features a reinforced dual-wall bearing cage, sealed 6200ZZ ball bearing plus double plating thickness on stem designed for max performance and ultra-life weather protection. Garage door roller can reuse 100,000 cycles.
• Installation Tips - Method 1: Slightly bend track at the seam to remove, replace roller and move the door to do the next roller (repeat on other side). Method 2: Remove screws that attach brackets to your door, secure cable before releasing the bottom brackets that are under the cable spring tension, then clamp the cable to the track, slide out old rollers, place new rollers in their place and screw in backers.

The ROP Shop | (Pack of 2) 2\ Nylon Rollers with 6200ZZ Bearing Offer Quieter Garage Door Use

• The ROP Shop replacement 2" Nylon Roller with 11-Ball Bearing for Residential & Commercial Garage Door.
• Specs - Roller Diameter: 1 13/16" for a 2" track. Roller Thickness: 1/2". Stem Length: 4 1/8" (3.5" from bevel). Stem Diameter: 7/16". Single Load: 150lbs. Bearing Type: 6200ZZ Precision. Roller Material: Nylon. Roller Color: White. Refer to images 2 & 3 for more information.
• Rollers are constructed from nylon that is softer and quieter than plastic or metal rollers and smoother than original equipment rollers. Features a reinforced dual-wall bearing cage, sealed 6200ZZ ball bearing plus double plating thickness on stem designed for max performance and ultra-life weather protection. Garage door roller can reuse 100,000 cycles.
• Installation Tips - Method 1: Slightly bend track at the seam to remove, replace roller and move the door to do the next roller (repeat on other side). Method 2: Remove screws that attach brackets to your door, secure cable before releasing the bottom brackets that are under the cable spring tension, then clamp the cable to the track, slide out old rollers, place new rollers in their place and screw in backers.