Martin 2517 2 7/16 Taper Bushing, Sintered Steel, Inch, 2.44\ Bore, 3.375\ OD, 1.75\ Length
- Taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
- Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
- Sintered steel for greater strength and resistance to wear than steel.
- Keyed to the shaft to prevent the shaft from rotating in the bushing.
- Interchangeable with taper bushings from various manufacturers.
Check StockMartin 2517 1 1/4 Taper Bushing, Sintered Steel, Inch, 1.25\ Bore, 3.375\ OD, 1.75\ Length
- Taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
- Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
- Sintered steel for greater strength and resistance to wear than steel.
- Keyed to the shaft to prevent the shaft from rotating in the bushing.
- Interchangeable with taper bushings from various manufacturers.
Check StockMartin 2012 1 5/8 Taper Bushing, Sintered Steel, Inch, 1.63\ Bore, 2.75\ OD, 1.25\ Length
- Taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
- Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
- Sintered steel for greater strength and resistance to wear than steel.
- Keyed to the shaft to prevent the shaft from rotating in the bushing.
- Interchangeable with taper bushings from various manufacturers.
Check StockMartin 2012 1 1/8 Taper Bushing, Sintered Steel, Inch, 1.13\ Bore, 2.75\ OD, 1.25\ Length
- Taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
- Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
- Sintered steel for greater strength and resistance to wear than steel.
- Keyed to the shaft to prevent the shaft from rotating in the bushing.
- Interchangeable with taper bushings from various manufacturers.
Check StockMartin SH 1 Quick Disconnect Bushing, Sintered Steel, Inch, 1\ Bore, 1.871\ OD, 1.31\ Length
- Quick disconnect bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
- Split through flange and taper to provide strong clamping on the shaft.
- Sintered steel for greater strength and resistance to wear than steel.
- Keyed to the shaft to prevent the shaft from rotating in the bushing.
- Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads.
Check StockMartin JA 1 Quick Disconnect Bushing, Sintered Steel, Inch, 1\ Bore, 1.375\ OD, 1.06\ Length
- Quick disconnect bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
- Split through flange and taper to provide strong clamping on the shaft.
- Sintered steel for greater strength and resistance to wear than steel.
- Keyed to the shaft to prevent the shaft from rotating in the bushing.
- Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads.
Check StockMartin JA 7/16 Quick Disconnect Bushing, Sintered Steel, Inch, 0.43\ Bore, 1.375\ OD, 1.06\ Length
- Quick disconnect bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
- Split through flange and taper to provide strong clamping on the shaft.
- Sintered steel for greater strength and resistance to wear than steel.
- Keyed to the shaft to prevent the shaft from rotating in the bushing.
- Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads.
Check StockMartin SK 7/8 Quick Disconnect Bushing, Sintered Steel, Inch, 0.87\ Bore, 2.812\ OD, 1.93\ Length
- Quick disconnect bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
- Split through flange and taper to provide strong clamping on the shaft.
- Sintered steel for greater strength and resistance to wear than steel.
- Keyed to the shaft to prevent the shaft from rotating in the bushing.
- Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads.
Check StockMartin SDS 1 1/8 Quick Disconnect Bushing, Sintered Steel, Inch, 1.13\ Bore, 2.187\ OD, 1.37\ Length
- Quick disconnect bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
- Split through flange and taper to provide strong clamping on the shaft.
- Sintered steel for greater strength and resistance to wear than steel.
- Keyed to the shaft to prevent the shaft from rotating in the bushing.
- Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads.
Check StockMartin SF 1 7/16 Quick Disconnect Bushing, Sintered Steel, Inch, 1.44\ Bore, 3.125\ OD, 2.06\ Length
- Quick disconnect bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
- Split through flange and taper to provide strong clamping on the shaft.
- Sintered steel for greater strength and resistance to wear than steel.
- Keyed to the shaft to prevent the shaft from rotating in the bushing.
- Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads.
Check StockMartin SH 32MM Quick Disconnect Bushing, Sintered Steel, Metric, 32 mm Bore, 47.52 mm OD, 33.33 mm Length
- Quick disconnect bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
- Split through flange and taper to provide strong clamping on the shaft.
- Sintered steel for greater strength and resistance to wear than steel.
- Keyed to the shaft to prevent the shaft from rotating in the bushing.
- Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads.
Check StockMartin SDS 35MM Quick Disconnect Bushing, Sintered Steel, Metric, 35 mm Bore, 55.54 mm OD, 46.03 mm Length
- Quick disconnect bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
- Split through flange and taper to provide strong clamping on the shaft.
- Sintered steel for greater strength and resistance to wear than steel.
- Keyed to the shaft to prevent the shaft from rotating in the bushing.
- Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads.
Check StockYuecoom Sliding Window Pulley, Window Pulley Stainless Steel Sliding Window Groove Wheel Furniture Hardware Fittings
- Stable Window Pulley: It adopts stainless steel frame, brass double groove pulley, durable, smooth and quiet..
- Window Pulley Application: The pulley has little friction, stable and silent, and is suitable for aluminum alloy window..
- Durable Window Pulley: It is fixed with stainless steel rivets, wear‑resistant, and can be used for a long time..
- Practical Window Pulley: The installation is firm, not easy to loosen, and the bearing capacity is strong, about 45‑80kg..
- Convenient Window Pulley: Easy to install and use, flexible push and pull, it is a practical hardware accessory..
Check Stock