Categories

Best Split unit Hydraulic Crimping Tools

Lincoln Electric KH538 Lug/Cable Crimping Tool Pack of 1 ,Black

  • Hydraulic crimping tool specification: Crimping range 12 AWG-2/0 AWG, Stroke 0.56Inch.
  • Hydraulic crimping tool 9 pairs of dies: 12.10.8.6.4.2.1/0. 2/0 AWG and 1/8 "for stainless steel wire rope.
  • 【Wide Application】 The crimper tool is great for battery and welding cables , power Wires , and electrical cables ,even can be rotated 180°....
  • 【Comfortable grip】 The vinyl-dipped grip is very comfortable and easy to use and Wont slip.
  • 【Easy operation】The mold can be easily replaced by one-way fixed latch.
Check Stock

Mophorn Hydraulic Hose Crimper Hydra-Krimp 71500,Manual AC Hose Crimper Kit Air Conditioning Repaire Handheld,Hydraulic Hose Crimping Tool with 7 Die Set for Barbed and Beaded Hose Fittings

  • Durable Crimping Tool: Our crimper is made of aluminum alloy material, ensuring its durability. Stamper hardness can reach up to 53 HRC to bear a....
  • Integral Hydraulic: This hand-held integral hydraulic press A/C hose crimper is made for easy use. The hydraulic tool is designed with exquisite....
  • Instant Setup: Our hydraulic crimper can be installed according to the following steps: First, select the correct die to insert, insert the pin, then....
  • Lightweight & Compact: One-person operation saves your time and energy. Besides, the crimping tool kit is stored in a plastic toolbox, reducing the....
  • Wide Application: The crimping tool has a base that can be mounted to a bench for easy use, or the base can be held by any vise. It is compatible with....
Check Stock

Burndy Y1MRTC Hytool Ratchet Crimper, Copper Hydent Terminals, Splices, and Thin-Wall C-Taps, 0.73' Width, 9-7/8' Length

  • 【Hydraulic Power Driven System 】Different with similar hand tool that relies on leverage and hand power, our hydraulic copper tube fittings crimping tool is designed with hydraulic cylinder which is labor-saving. One person is totally enough to finish leak-free connections..
  • 【Changeable Crimping Jaws 1/2", 3/4", 1"】 With a ball bearing springs inside the head, just simply slide in and out to change the crimping dies of different size to meet your various demand and make it the fastest solution for pipe maintenance and repair..
  • 【360° Rotating Head】The rotating head makes the copper plumbing easier in some locations especially for Tee fittings..
Check Stock

AMZCNC 10 Tons Hydraulic Wire Battery Cable Lug Terminal Crimper Crimping Tool With 9 Pairs of Dies

  • Hydraulic crimping tool specification: Crimping range 12 AWG-2/0 AWG, Stroke 5.6Inch.
  • Hydraulic crimping tool 9 pairs of dies: 12.10.8.6.4.2.1/0. 2/0 AWG and 1/8 "for stainless steel wire rope.
  • 【Wide Application】 The crimper tool is great for battery and welding cables , power Wires , and electrical cables ,even can be rotated 180° freely for narrow space working.
  • 【Comfortable grip】 The vinyl-dipped grip is very comfortable and easy to use and Wont slip.
  • 【Easy operation】The mold can be easily replaced by one-way fixed latch.
Check Stock

10 Ton Custom Hydraulic Hand Crimper Tool for Stainless Steel Cable Railing Fittings for 1/8 to 3/16 Cable -Wire Swaging Tool Kit with Stainless Steel Cable Cutter

  • 【DURABILITY】Made of durable materials, high strength and good toughness. And dies are made of hardened steel with chrome finish. It also provides....
  • 【SPECIFICATION】Crimps 12 AWG to 2/0 AWG size copper and aluminum wires. Maximum crimping power: 10 tons. Crimping Stroke : 12mm. The hydraulic....
  • 【HUMANIZED DESIGN】With this professional crimper, you can crimp wires and butt connectors easily. It is much easier than using a pair of hand....
  • 【Size】Hydraulic Hand Crimper Tool: Length:approx.310mm, Weight:approx.N.W1.75kg G.W3kg. Cable Cutter: 8.1 x 2.8 x 1.4 inches, Weight:11.2 ounces..
  • 【Package List】Includes Hydraulic Hand Crimper with 9 sets of the crimping dies, seal rings, strong protective carrying case, cable cutter and pair....
Check Stock

BLIKA 10 Ton Hydraulic Crimping Tool and Cable Cutter, Hydraulic Wire Battery Cable Lug Terminal Crimper Crimping Tool with 9 Dies, Wire Swaging Tool for 1/8' to 3/16' Cable Railing Hardware

  • Compatibility : Crimps 12 AWG to 2/0 AWG size copper and aluminum wires. Maximum crimping power: 10 tons. Crimping Stroke : 12mm. The hydraulic crimper’s head can be rotated 180° freely to benefit narrow space working, a good choice for battery and welding cables, power wires, electrical cables, etc..
  • Material: Made of durable materials with high strength and good toughness. Black Oxide Crimp Head and Dies won’t chip or flake. Dies are made of hardened steel with chrome finish. Vinyl-dipped grip for comfort and easy control..
  • Black Crimping Dies: Comes with crimping dies for 12 AWG, 10 AWG, 9 AWG, 8 AWG, 6 AWG, 4 AWG, 2 AWG, 1 AWG and 2/0 AWG cables and creates strong, hexagonal crimps for a clean, efficient look for your projects..
  • Easy to use: On/Off control for fast operation, easy crimping and arm retraction when crimping aluminum or copper wire. The C-style head makes side entry easier to change the dies..
  • Package List: 1X Hydraulic Crimper Tool + 9 pairs of crimping dies + 1X Cable Cutter + Seal Rings + 1X Work Gloves + 1X Carrying Case. If you’re not satisfied with this item at any time within one month of purchase, we’ll provide a refund or replacement..
Check Stock

NA Black Hydra Krimp 71500 AC Hose Crimper

  • The lightweight hand-held hydraulic press is very portable..
  • Crimping pipes and fittings in an easy and labor-saving way..
  • The kit is applicable for beadlocking fitting and barrier A/C hose..
  • The dies snap quickly into the press fixture requiring no pins or screws..
  • Wide Application: The hydraulic crimper is ideal for shop and field operations, crimping pipes and fittings in an easy and labor-saving way. Customize....
Check Stock

10000 psi Hydraulic Hand Pump 2 Speed Power Pack Hydraulic Lifting Pump

  • Maximum operating pressure of 10,000 pounds per square inch (psi)，Two-speed Plunger Improves Pump Efficiency By 70%.
  • Advances and releases design for applications with a constantly applied load Pressure relief valve (Oil return knob)helps prevent pump overload, switch( venting nut) on the tail of it avoid sealed of oil box.
  • Oil capacity: 700cc, 2M high pressure hose ，oil pipe coupling with PT3/8 thread.
  • Manual Hydraulic Pump is durable, smooth surface and good sealing performance. Integral Casting Pump Body, Durable, Stable And Reliable.
  • High-pressure hydraulic hand pump for 5 ton to 200 ton hydraulic ram cylinders or split unit hydraulic puller and other hydraulic applications.
Check Stock

Hydraulic Copper Pipe Tube Fittings Crimping Tool with 1/2,3/4 and 1-inch Dies for ProPress Copper Pipe Fitting,Can t crimp Tee Fitting

  • Different with similar hand tool that relies on leverage and hand power, our hydraulic crimping pliers is designed with hydraulic cylinder which is....
  • 【Changeable Crimping Jaws 1/2", 3/4", 1"】 With a ball bearing springs inside the head, just simply slide in and out to change the crimping dies of....
  • Compatible with Viega Copper,Pro-Press,Elkhart,Conex Pipe Fittings.
Check Stock

10 Tons Hydraulic Wire Battery Cable Lug Terminal Crimper Crimping Tool With 9 Pairs of Dies

  • Professional tool to attach lugs to the ends of heavy duty power cables and wires. The C-style head makes side entry easy to access and operate. Crimps 12 AWG to 2/0 AWG size copper and aluminum wires..
  • Crimping range is from 4 to 70 mm2. Maximum crimping power 10 tons. Vinyl-dipped grip for comfort and easy control. A carrying case is included to sort of all necessary parts.
  • Easy operation and easy to change the dies. On-Off control for speedy operations.
  • 9 pairs of hexagon dies: a Hydraulic Crimping Tool Instruction..
  • 100% money back guarantee. All items have been double inspected before on market..
Check Stock

AMZCNC Hydraulic Cable Lug Crimper 10 US TON 12 AWG to 00 (2/0) Electrical Terminal Cable Wire Tool Kit with 9 Die (Crimping Tool)

  • Hydraulic crimping tool specification: Crimping range 12 AWG-2/0 AWG, Stroke 0.56Inch.
  • Hydraulic crimping tool 9 pairs of dies: 12.10.8.6.4.2.1/0. 2/0 AWG and 1/8 "for stainless steel wire rope.
  • 【Wide Application】 The crimper tool is great for battery and welding cables , power Wires , and electrical cables ,even can be rotated 180° freely for narrow space working.
  • 【Comfortable grip】 The vinyl-dipped grip is very comfortable and easy to use and Wont slip.
  • 【Easy operation】The mold can be easily replaced by one-way fixed latch.
Check Stock

Hand Operated Hydraulic Crimping Tool Range 12 AWG-2/0 AWG for Cable Lugs Hydraulic Crimping Crimper Wire Terminal Lug Tool with 9 Pairs of Dies

  • Hydraulic crimping tool specification: Crimping range 12 AWG-2/0 AWG, Stroke 5.6Inch.
  • Hydraulic crimping tool 9 pairs of dies: 12.10.8.6.4.2.1/0. 2/0 AWG and 1/8 "for stainless steel wire rope.
  • 【Wide Application】 The crimper tool is great for battery and welding cables , power Wires , and electrical cables ,even can be rotated 180° freely for narrow space working.
  • 【Comfortable grip】 The vinyl-dipped grip is very comfortable and easy to use and Wont slip.
  • 【Easy operation】The mold can be easily replaced by one-way fixed latch.
Check Stock

DOUBLE CHEN Copper Tube Fittings Hydraulic Pipe Crimping Tool with 1/2',3/4' and 1' Jaw Copper Pipe Propress Crimper Pressing Pliers,Along with Pipe Cutter

  • 【Changeable Crimping Jaws 1/2", 3/4", 1"】 With a ball bearing springs inside the head, just simply slide in and out to change the crimping dies of different size to meet your various demand and make it the fastest solution for pipe maintenance and repair..
  • Different with similar hand tool that relies on leverage and hand power, our hydraulic crimping pliers is designed with hydraulic cylinder which is labor-saving. One person is totally enough to finish leak-free connections..
  • Compatible with Viega Copper,Pro-Press,Elkhart,Conex Pipe Fittings.
Check Stock