Ethernet Splitter [Paired Use Only] Network Cable Y Division Adapter LAN Cord 1to2 Port Separator Internet line Segregator 1 to 2 Way Hub Connector for RJ45 Cat5/Cat5e/Cat6/Cat6a/Cat6e/Cat7 [2-Pack]
- Please NOTE: Equipped with a 1.2m/4ft USB charging cable, it can support charging and networking at the same time. CAN NOT be used without connection..
- Ethernet Splitter 1 to 2: This RJ45 ethernet splitter is mainly used to solve the connection problem caused by insufficient wiring, Use the USB power supply cable and support two computers to share one Ethernet line simultaneously by means of the physical tapping method. Note: Two Female Port Workable Simultaneously..
- Transfer Speed: RJ45 Splitter Adapter can divide a network cable into two outputs, the speed of each cable group (1 and 2) can only reach 100Mbps.And the signal transmission of two cable groups will not interfere with each other..
- Transmission More Stable: The Network Splitter Ethernet Built-in Thick Environmental Protection PCB Circuit Board, RJ45 Eight-core Standard Jack, Gold-plated Pin Core, Integrated Mechanical Welding, More Stable Transmission Signal, it is more convenient to design closed insulation module and safer to use..
- Wide Compatibility: RJ45 8P8C LAN Ethernet Splitter connector extender is compatible wi....
Check Stock
Bingfu Cellular 4g LTE SMA Antenna – with TS9 Splitter Cable – Compatible with Verizon AT&T T-Mobile Sprint 4G LTE Mobile Hotspot MiFi Router Cellular Mobile Broadband Modem USB Modem Dongle Adapter
- Antenna Thru Hole Mounting Screws Diameter: M12 11.76mm-11.95mm.
- 3m/10 feet Low Loss KSR 195 Extension Coaxial Cable.
- with RP-SMA Male Adapter and SMA Female to Dual TS9 Connector Splitter Cable.
- Package List: 1 x Antenna, 1 x RP-SMA Connector Adapter, 1 x Wall Mount Bracket, 4 x Self-tapping Screws, 1 x SMA Female to Dual TS9 Connector Splitter Cable (As the Picture Shown).
- Compatible with 4G LTE Mobile Router, Mobile Broadband Modem Hotspot, CPE Router, Cellular Gateway, Vehicle Car Truck RV Bus Van Mobile Cellular.
- Compatible with 4G LTE Cellular Trail Camera, Game Camera, Hunting Camera, Outdoor Security Camera, Celluar Surveillance Camera.
- Vehicle 4G LTE Tracker, Real Time Monitor, Mobile Vehicle Car DVR MDVR Video Recorder.
- Compatible with Industrial 4G LTE Router, Cellular IoT Gateway, 4G LTE M2M RTU DTU Terminal, Cellular Embedded Module, Remote Metering and SMS Alarm, Remote SCADA DAQ Module, Remote Relay Gate Opener Switch, Vending Machine, Digital Signage, Delivery Locker, Cellular Temperature Humidity Sensor Monitoring System, GSM Alarm System, Wireless Security Sensor Motion Detector Alert.
Check StockNanolux ballasts 0-10V Module w/3 Way Splitter & 9 Cable
- Nanolux now offers 0-10V control modules for all NCCS ready ballasts. The 0-10V module allows all Nanolux ballasts to run on any controller using....
- Voltage range for dimming is from 100%-50% is 10V-5V..
- Comes with 3-way splitter and 3-meter RJ11 cable.
Check Stock
V-Show 6 Way Isolated DMX Splitter - 6 Branch Universal Splitter Amplifier Distributor 3Pin Outputs for DMX Signals.
- √ 6 port Dmx splitter isolated outputs greatly save your setup time and the use of cable, reducing the risk of a plug failure or tripped over wire.Each output module is completely isolated by photoelectric separator, which effectively enhances the isolation and protection ability of the product. And anti-interference ability..
- √ 3pin male XLR inputs feed through 3pin female output. Each connection location can be connected independently, up to 32 lamps and lanterns.
- √ Lightweight and easy to mount, functions perfectly as a transmission hub for any permanent setup or mobile entertainment system..
- √ Built from high quality materials, this splitter is the ideal blend of functionality, durability and portability..
- √ This unit is perfect for any club, bar, stage or mobile show looking to reduce their need for wires, decrease set-up time, and eliminate restrictions on where controllers and fixtures can be placed in relation to one another..
Check Stock125 ATX Power Supply Breakout Board and Acrylic Case Kit, ATX Power Supply Breakout Adapter for MCU Electronic Component Adjustable Voltage Knob 24Pin
- 【ATX power splitter board】ATX power splitter board, with ADJ adjustable voltage knob, supports 3.3V, 5V, 12V and 1.8V10.8V (ADJ) output voltage..
- 【Precise Screw Positioning】The voltage output terminal of the ATX power expansion board corresponds to each screw terminal..
- 【With an acrylic box】At the same time, the panel is also equipped with an acrylic box kit for easy use..
- 【Easy to Connect】Compatible with 3.3V: STM32 MCU, network communication equipment, such as WiFi for Bluetooth and other devices, generally for microcontrollers, and some lowpower modules, etc. 5V: for Raspberry Pi/Tinker Board/Nano Pi/USB interface, etc..
- 【Widely Compatible】Compatible with 9V motor drive, display drive module, etc..
- 12V motor drive, LED lights, vehicle equipment requiring less than 24w of power, etc..
Check StockTesteronics 7 in 1 Breadboard Power Module Kit Compatible for Arduino/Raspberry Pi| 2PCS 3.3V/5V Power Supply Modules | 9V/1A Power Adaptor | 2PCS Solderless Breadboard 400 Points|65 PCS Jumper Wires
- [Breadboard Power Module] Input voltage: 6.5-9V (DC Jack) or USB power supply.
- [9V / 1A Power Adaptor] Output 9V / 1A DC, Input: 100~240V AC. US Plug 5.5mm x 2.5mm.
- Compatible for Arduino UNO R3 Mega 2560 1280 ..
- [400 Breadboard] 400 Points Solderless Breadboard, ABS Plastic Body, Fit for 21-26 AWG (0.4-0.7MM) wire. Compatible for Arduino Nano, ESP32, Raspberry Pi Pico..
- [DC Power Splitter Cable] 1 Female to 2 Male 5.5mm x 2.1mm DC Power Adapter Splitter Cable.
- [65 Jumper Wires] 65 PCS 24AWG Breadboard Solid Multi colors pure Copper Jumper Wires Kit.
Check StockResistance Power Divider DC-5GHz SMA-K Power Splitter Module Signal Power Splitter Industrial Eletrical Supplies
- Support DC-5G power frequency, RF power splitter is easy to use in the practical life, which makes itself getting great popularity..
- When it comes to the power distribution channel, resistance power divider makes one channel input signal into two channel..
- Connector form is for SMA-K, which refers to standard female connector and external screw inner hole..
- The connecting part has good contact performance, which ensures stable working..
- Professionally designed, power divider module can be the perfect replacement for the old or damaged one..
Check StockPower Distribution Block Car Audio,0/2/4 AWG in 4/8 AWG Out Solid Copper Amp Ground Distribution Connecting Block for Amplifier 2 Way
- Power/Ground Distribution Block for Car Audio Amplifier,0/1 Gauge In and 2 Way 4/8 Gauge Splitter block Out.
- Distribution Block Connection Module Made of Solid Pure Copper,Higher Conductivity.
- High Temperature Resistant Base and High Strength Protective Cover, Strong and Impact Resistant, Safer.
- Smaller Size, Greater Performance, Easier to Install and Hide in Your Car.
- Wide Range of Applications, Suitable for Cars, Yachts, Motorcycles, RV and Other Audio and Video Systems.
Check Stock
Cable Matters 2-Pack Bi-Directional 2.4 Ghz 2 Way Coaxial Cable Splitter for STB TV, Antenna and MoCA Network - All Port Power Passing - Gold Plated and Corrosion Resistant
- The gold plated balanced coaxial cable splitter 2 way splits an incoming coaxial signal from cable television (CATV), VCR, satellite receiver, cable box, or antenna into multiple outgoing signals.
- Convenient and cost-effective 2-pack coax splitter 2 way provides spare or replacement units to use on different devices, including a MoCA adapter.
- Gold plated MoCA splitter ensures a corrosion free connection and increases durability for the antenna splitter.
- Precisely constructed zinc cast housing is radio frequency shielded to reduce insertion losses between 5-2450 MHz.
- The splitter is also referred to as coaxial splitter, coax splitter, coax cable splitter, RG6 splitter, RG6 cable splitter, F type splitter, cable TV splitter, TV signal splitter, RF splitter, F pin splitter, coaxial video splitter, and coaxial digital splitter.
Check Stock
Cable Matters 2-Pack Bi-Directional 2.4 Ghz 4 Way Coaxial Cable Splitter for STB TV, Antenna and MoCA Network - All Port Power Passing - Gold Plated and Corrosion Resistant
- The gold plated balanced coaxial cable splitter 2 way splits an incoming coaxial signal from cable television (CATV), VCR, satellite receiver, cable box, or antenna into multiple outgoing signals.
- Convenient and cost-effective 2-pack coax splitter 4 way provides spare or replacement units to use on different devices, including a MoCA adapter.
- Gold plated MoCA splitter ensures a corrosion free connection and increases durability for the antenna splitter.
- Precisely constructed zinc cast housing is radio frequency shielded to reduce insertion losses between 5-2450 MHz.
- The splitter is also referred to as coaxial splitter, coax splitter, coax cable splitter, RG6 splitter, RG6 cable splitter, F type splitter, cable TV splitter, TV signal splitter, RF splitter, F pin splitter, coaxial video splitter, and coaxial digital splitter.
Check Stock
Cmple 3-Way Splitter 2050MHz F-Type 2.05Ghz 3 Way Coaxial Cable Splitter (RG6 Splitter, Coaxial Splitter, TV Splitter, C
- HEAVY DUTY 3-WAY SPLITTER - Split a single cable or satellite signal to view and display on three separate TVs. This Coax Splitter is designed for use with amplifiers, amplified Antennas, HDTV and more..
- FREQUENCY RANGE: 5-2050Mhz (2GHZ) - also referred to as coaxial splitter, coax splitter, coax cable splitter, RG6 splitter, RG6 cable splitter, F type splitter, cable TV splitter, TV signal splitter, RF splitter, F pin splitter, coaxial video splitter, and coaxial digital splitter.
- COMPATIBILITY with all digital ready RF signals - Allows 3 units to be operated from one source. With grounding block and screw mount. High return loss and isolation for better performance on TV and satellite signal.
- NICKEL PLATED DESIGN: Ensures a corrosion free connection and increases durability for optimal connectivity. Lower digital noise and higher signal quality.
- PACKAGE INCLUDE: 1 x Nickel Plated 3-Way Coaxial Splitter for TV and Satellite.
Check Stock
AuviPal 802.3af/at Compliant PoE Splitter (2 Pack), PoE to Micro USB 5V Power and 100Mbps Ethernet Adapter for Raspberry Pi, Fire TV Ethernet Adapter, Chromecast, Wyze Cam v2, Arlo 2 Pro, NanoPi
- Deliver DC 5V 2.4A Power and up to ultra-fast 100M Ethernet data for raspberry pi simultaneously, No need for a nearby AC outlet anymore..
- Original from AuviPal with 10/100Mbps wired fast speeds which gives you a full speed of your internet, Ideal for providing both power and Ethernet for Raspberry Pi 1B, 1B+, 2B, 3B, Not for latest model 3B+, Please search "B07PNQC25X" on amazon for 3B+..
- It utilizes the optimal PoE module solution with Isolation transformer + Standard PD (Powered Devices) chip. Run your Raspberry Pi more stable and safer when compared with others cheap non-isolated transformer and diode PD module..
- PoE HAT Alternative - a cost savings way to achieve POE function for your Raspberry Pi instead of buying an overpriced PoE HAT, What’s more, no need to dismount raspberry pi case or add-on screen anymore by using AuviPal PoE Splitter..
- Fully complies with IEEE 802.3af/at standard, Work with all IEEE 802.3af/at compliant PoE switch and PoE Injector (Not included). Plug and play, no extra effort or configuration required, Set it up in seconds..
Check Stock
GROWORD Satellite Splitter 5-2500MHz, 2-Way CATV Splitter with RG6 Coaxial Cable and 2 Connectors, for Pass Power to LNB, Improve HD TV Satellite Antenna Signal Quality, Corrosion Resistant
- ✅【Suitable for Satellite TV Signal】 5-2500MHz digital coaxial cable splitter can be adapted to your satellite antenna, satellite receiver, satellite tuner(LNB), set-top box.
- and can split coaxial cable, RG6 and F660 cable, satellite and TV signal. It can be used both for new house decoration and indoor and outdoor replacement. It can be used in your cable TV coaxial cable as well..
- ✅【Easy Construction Cable Clean】 When there is only one antenna at home, but there are 2 or more TVs, no need to connect an extra antenna, just a 2-Way coax splitter! Our cable splitter comes with 1 splitter + 2 cables of 13.78'' (35cm) length + 2 female output connectors. Convenient construction, home cables are not cluttered, making home wiring more beautiful and aesthetic..
- ✅【Improve Signal Quality】 Worried about signal loss? High-performance satellite tv splitters with only 4dB output loss per port, which can effectively improve signal quality, reduce TV noise and equipment signal loss. It is ideal for improving TV signals..
- ✅【PASS Power to LNB】 The power supply supplies power to the satellite tuner(LNB) through all ports, no need to buy additional cables, this can make your satellite connection easier..
- ✅【Unique Design for Durability】 The cab....
Check Stock
