Categories

Best Spray Gun Regulator

Wagner Power Products 276124B HVLP Conversion Gun

  • Paint spray gun for converting high-pressure compressors into HVLP fine-spray system.
  • Works with compressors with at least 1-1/2 horsepower.
  • Includes conversion gun (0276124) regulator valve, bleeder and non-bleeder connections, needle/nozzle fine-finish projector set, 1-quart cup.
Check Stock

NorthStar ATV Spot Sprayer - 26-Gallon Capacity 2.2 GPM 12 Volt

  • 12V, 2.2 GPM NorthStar NSQ Series quick-connect on-demand pump generates 70 PSI.
  • Patented DXS-3 pump valves are made with chemical-resistant Viton for faster priming, better performance and longer life.
  • Santoprene diaphragm has superior reliability and chemical resistance.
  • Regulator, pressure gauge and deluxe trigger spray gun for fine tuning of spray pressure.
  • Includes deluxe trigger spray gun with adjustable stream-to-cone brass nozzle and 15 feet of hose.
Check Stock

NorthStar ATV Spot Sprayer - 10-Gallon Capacity, 1.1 GPM, 12 Volt

  • 12V, 1.1 GPM high-pressure NorthStar NSQ Series quick-connect on-demand pump generates 100 PSI.
  • Pump valves are made with chemical-resistant Viton for faster priming, better performance and longer life.
  • Santoprene diaphragm has superior reliability and chemical resistance.
  • Regulator, pressure gauge and deluxe trigger spray gun for fine tuning of spray pressure.
  • Includes deluxe trigger spray gun with adjustable stream-to-cone brass nozzle and 15 feet of hose.
Check Stock

TCP Global Professional Gravity Feed HVLP Spray Gun with a 2.0mm Fluid Tip, 1 Liter Aluminum Cup and Air Regulator

  • TCP Global Brand High Performance HVLP Spray Gun with a 2.0 mm Fluid Tip, 1 Liter Aluminum Cup and a Air Regulator.
  • The 2.0mm Fluid Tip enables You to Spray Thicker Materials such as Extreme High Build or Polyester Primers, Thick Enamels, Thinned Latex Paints, Chip Guard, Metal Flakes, Gel Coats, Etc....
  • Spray Gun has Control Knobs for Full Adjustment over Spray Pattern, Fluid Control and Air Pressure. Contains a Stainless Steel Needle and Nozzle Set..
  • Gun has a full baffle head assembly that enables it to produce a Fully Atomized and Consistent Spray Pattern for a Smooth Professional Finish!.
Check Stock

TCP Global Professional Gravity Feed HVLP Spray Gun with a 1.8mm Fluid Tip, 1 Liter Aluminum Cup and Air Regulator

  • TCP Global Brand High Performance HVLP Spray Gun with a 1.8 mm Fluid Tip, 1 Liter Aluminum Cup and a Air Regulator.
  • The 1.8 mm Fluid Tip is Ideal for Spraying Primers, Sealers, Single Stage and other Medium to Heavy Viscosity Coatings..
  • Spray Gun has Control Knobs for Full Adjustment over Spray Pattern, Fluid Control and Air Pressure. Contains a Stainless Steel Needle and Nozzle Set..
  • Gun has a full baffle head assembly that enables it to produce a Fully Atomized and Consistent Spray Pattern for a Smooth Professional Finish!.
Check Stock

Mini Automotive Paint Touch-Up HVLP Spray Gun with 1.2mm Fluid Tip and Regulator

  • TCP Global Brand High Performance Mini Detail HVLP Spray Gun with a 1.2 mm Fluid Tip, 150 cc Aluminum Cup and a Air Regulator.
  • Ideal to Use for Touching-Up Spots, Panel Repairs, Door Jambs, and Difficult to Reach Areas.
  • The 1.2 mm Fluid Tip Allows You to Spray Thicker Materials Like Primers and Other Medium to High Viscosity Coatings.
  • Spray Gun has Control Knobs for Full Adjustment over Spray Pattern, Fluid Control and Air Pressure.
Check Stock

TCP Global® Brand Professional 1.3mm HVLP Spray Gun-gravity Feed-auto Paint Basecoat Clearcoat with Air Regulator (G6600-13)

  • TCP Global Brand High Performance HVLP Spray Gun with a 1.3 mm Fluid Tip, 1 Liter Aluminum Cup and a Air Regulator.
  • The 1.3 mm Fluid Tip is Ideal for Optimal Atomizing when Spraying Base-coats, Clear-coats and other Light to Medium Viscosity Materials..
  • Spray Gun has Control Knobs for Full Adjustment over Spray Pattern, Fluid Control and Air Pressure. Contains a Stainless Steel Needle and Nozzle Set..
  • Gun has a full baffle head assembly that enables it to produce a Fully Atomized and Consistent Spray Pattern for a Smooth Professional Finish!.
Check Stock

1/4 Inch Air Adjusting Regulator Valve with Pressure Gauge and Water Trap Filter, 2 Packs, Oil Separator Water Pressure Regulator Air Compressor Regulator for Air Spray Paint Gun Air Pressure Cleaner

  • Small integration: you will receive 3 packs of air adjusting regulator valves, each including 3 parts, which are black part for air pressure regulators, blue part for water filter and the last part for stainless steel adapter.
  • Separating impurities: the transparent filter bowl allows a visual inspection of cumulative water and can filter airborne solid residues through a spring loaded valve at the bottom, such as pipe scale, rust, condensation from airlines.
  • Keep paintwork clean: air inlet measuring 1/4 inch and the overall length of 5.9 inch, the air compressor water separator kits fit into the paint gun and air compressor to prevent water, oil and impurities from polluting your painting work.
  • Safe and practical: with pressure regulator, you can see the working tool pressure clearly.
  • The sealing tape can be applied on thread part for nice prevention of air leakage.
  • Cleaning air passing through the pneumatic tools can extend the tool life span to some extent.
  • Wide applications: the air adjusting regulator valve is suitable for most spray tools and airlines, such as spray paint gun, air pressure cleaner, airline dryer and so on, which can be applied as a compact filter for air spray guns.
Check Stock

DeVilbiss HAV511 Air Adjusting Valve with Gauge

  • DeVILBISS HAV-511 High Output Air Adjusting Valve Regulator With Gauge.
  • Includes markings for the optimal operating range for the Devilbiss GTI Millennium, and GFG Plus Gun.
  • Precise air control at the gun for best, consistent results.
  • Impact resistant guage and break resistant lens.
  • Lightweight design that fits and professional spray gun.
Check Stock

LE Lematec AR-01 Air Compressor Regulator ¼ NPT. Air Pressure Regulator 0-150 PSI

  • Precisely Control and Regulate Airflow. The AR-01 HVLP Regulator gives you the precise control and regulation of airflow that is necessary to prevent overspray and loss of materials..
  • High Impact Housing Air Regulator is built to last. With heavy duty materials, it will handle the most extreme shop applications..
  • The LE LEMATEC Spray Gun Regulator is equipped with a Universal 1/4" NPT for more flexible air compressor and compressor tool applications..
  • 89 SCFM Pressure Regulator. More practical for medium to large size jobs. This regulator is designed to provide a consistent and stable flow of air, making it perfect for a variety of applications..
  • Operating Range 0-150 PSI. This mini air regulator is designed to be used in a wide range of applications, including inflating tires, powering pneumatic tools, and much more..
Check Stock

Wagner Spraytech 0529002 PaintREADY Handheld HVLP Paint Sprayer, iSpray Nozzle Great for Medium Sized Projects

  • SUPERIOR PERFORMING HVLP SPRAY GUN: The PaintREADY paint sprayer quickly applies coatings and provides a roller-like finish on your surface. It’s perfect for painting walls, ceilings, and other medium-sized projects.
  • INNOVATIVE iSPRAY NOZZLE: The iSpray front end provides an improved spray pattern and delivers concentrated material output that’s 5X faster than a brush.
  • THREE SPRAY PATTERNS: Turn the air cap to spray round, horizontal, or vertical to suit the shape of the object you’re spraying.
  • PERFECT FLOW EVERY TIME: Adjust the material volume by turning the regulator on the trigger of the spray gun to match covering speed, project size and receive the perfect finish.
  • SPRAY PAINT RIGHT FROM THE CAN: The sprayer utilizes a powerful two-stage, indoor/outdoor rated air turbine that allows you to spray un-thinned interior/exterior paints including paint and primer-in-one products.
Check Stock

TCP Global Brand Professional New 2.5mm HVLP Spray Gun- Great for High Build Auto Paint Primer - Metal Flake application and any heavy bodied paint or Primer Material -with Air Regulator

  • TCP Global Brand High Performance HVLP Spray Gun with a 2.5 mm Fluid Tip, 1 Liter Aluminum Cup and a Air Regulator.
  • The 2.5 mm Fluid Tip Enables You to Spray Really Thick Materials such as Extreme High Build or Polyester Primers, Thick Enamels, Latex Paints, Chip Guard, Metal Flakes, Gel Coats, Etc....
  • Spray Gun has Control Knobs for Full Adjustment over Spray Pattern, Fluid Control and Air Pressure. Contains a Stainless Steel Needle and Nozzle Set..
  • Gun has a full baffle head assembly that enables it to produce a Fully Atomized and Consistent Spray Pattern for a Smooth Professional Finish!.
Check Stock

Zep Dura Shot Heavy-Duty Compressed Air Sprayer - 24 Ounces (1 Unit) SP00021 - for Solvent and Water Based Products

  • 1 x 2.5mm Nozzle (1 nozzle was pre-installed to the spray gun).
  • 1x True Micrometer Air Regulator with Gauge.
  • This spray gun set is designed to provide equal atomization and partical size for all kinds of surface painting..
  • It has control knobs for full adjustment over spray pattern, fluid control and air pressure. Contains 1.4mm/1.7mm/2.5mm stainless steel needles and nozzles set to meet your different applications..
  • Light weight, ergonomic design and easy trigger pivot reduces operating fatigue..
  • Ideal for spraying base coats, clear coats and other high viscosity coatings such as extreme high build or polyester primers, thick enamels, latex paints, chip guard, metal flakes, gel coats, liquid mask, etc. Two years warranty..
Check Stock