Bolaxin Flywheel Locking Tool with 36mm 3/4 Inch Wench for 6.6L Duramax Engine
- Locks Flywheel in Place When Removing Harmonic Balancer on 6.6L Duramax Engines with Allison Automatic Transmissions.
- Saves time by locking the flywheel at the transmission instead of having to remove the starter for water pump replacement.
- Use 36mm 12-point socket with 3/4 square drive to remove harmonic balancer bolt and retorque on installation.
- Duramax 2500 / 3500 Pickups – Use toothed pieces only removes metal spring-loaded inspection plate on the bottom of the transmission. Tool should slide into opening toward engine with the top of the tool engaging the teeth of the flywheel..
- Duramax 4500 / 5500 Trucks -- Use toothed pieces with screws remove the rubber inspection cap on the bottom of the transmission. Insert the tool at the front of the opening to engage the flywheel and hand tighten bolt to hold tool in place..
Check Stock
Harmonic Balancer Puller Kit, Car Replacement Engine Crank Pulley, Portable Harmonic Balancer Puller Without Threaded Hol，Compatible with GM/Jeep/Chrysler, etc
- 【Time-Saving Tool 】 Compatible harmonic balancer pullers (without threaded holes) do not require disassembly of the radiator. This is a unique buckle attachment that can be removed without fixing the tie rod to the balancer. Make the damper easy to disassemble..
- 【Wide Compatibility Crankshaft Puller】Compatible with GM engine models: 5.3 L, 5.7 ls1 6.0 LS2 6.2 LS3 7. Engine models compatible with Chrysler/Dodge: 3.5 L V6, 3.6L V6, 4.7 L V8, 5.7 L V8, 6.1 L V8. Not applicable to 1997 or earlier general LT (5.7L LT1003c4) series engines (threaded holes), not applicable to 2018 and newer Coyote balancers..
- 【Crank Pulley Removal Tool with Clamp-in Design】 The tool adopts a "clamp-in" design, which can be disassembled without fastening the puller to the balancer, and is compatible with Jeep/GM/Chrysler/Dodge, etc..
- 【Balancer Puller Made of Carbon Steel 】Using special carbon steel material, the surface is sprayed with anti-corrosion paint, which is corrosion-resistant and durable.The tool has enough weight and strength to ensure that it will not break during use. Save unnecessary cost, time and energy, remove dampers or harmonic balancers. remove dampers or harmonic balancers..
- 【Easy-to-use 25264 Harmonic Balancer】Remove the harmonic balance....
Check StockDorman 594-321 Engine Harmonic Balancer for Select Dodge Models
- Ideal replacement - this harmonic balancer assembly exactly matches the fit and function of the original harmonic balancer for a direct replacement.
- Durable construction - this harmonic balancer features a rubber vibration damper bonded between ductile steel components.
- Cost-effective solution - this balancer assembly offers original equipment quality at a competitive price.
- Quality tested - this harmonic balancer has undergone dimensional verification, material validation and functional testing to ensure performance.
- Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check StockDorman 594-012 Engine Harmonic Balancer Compatible with Select Models
- Ideal replacement - this harmonic balancer assembly exactly matches the fit and function of the original harmonic balancer for a direct replacement.
- Durable construction - this harmonic balancer features a rubber vibration damper bonded between ductile steel components.
- Cost-effective solution - this balancer assembly offers original equipment quality at a competitive price.
- Quality tested - this harmonic balancer has undergone dimensional verification, material validation and functional testing to ensure performance.
- Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check StockDorman 594-209 Engine Harmonic Balancer Compatible with Select Models
- Ideal replacement - this harmonic balancer assembly exactly matches the fit and function of the original harmonic balancer for a direct replacement.
- Durable construction - this harmonic balancer features a rubber vibration damper bonded between ductile steel components.
- Cost-effective solution - this balancer assembly offers original equipment quality at a competitive price.
- Quality tested - this harmonic balancer has undergone dimensional verification, material validation and functional testing to ensure performance.
- Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check StockDorman 594-017 Engine Harmonic Balancer Compatible with Select Models
- Ideal replacement - this harmonic balancer assembly exactly matches the fit and function of the original harmonic balancer for a direct replacement.
- Durable construction - this harmonic balancer features a rubber vibration damper bonded between ductile steel components.
- Cost-effective solution - this balancer assembly offers original equipment quality at a competitive price.
- Quality tested - this harmonic balancer has undergone dimensional verification, material validation and functional testing to ensure performance.
- Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check StockDorman 594-002 Engine Harmonic Balancer Compatible with Select Models
- Ideal replacement - this harmonic balancer assembly exactly matches the fit and function of the original harmonic balancer for a direct replacement.
- Durable construction - this harmonic balancer features a rubber vibration damper bonded between ductile steel components.
- Cost-effective solution - this balancer assembly offers original equipment quality at a competitive price.
- Quality tested - this harmonic balancer has undergone dimensional verification, material validation and functional testing to ensure performance.
- Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check StockDorman 594-148 Engine Harmonic Balancer Compatible with Select Models
- Ideal replacement - this harmonic balancer assembly exactly matches the fit and function of the original harmonic balancer for a direct replacement.
- Durable construction - this harmonic balancer features a rubber vibration damper bonded between ductile steel components.
- Cost-effective solution - this balancer assembly offers original equipment quality at a competitive price.
- Quality tested - this harmonic balancer has undergone dimensional verification, material validation and functional testing to ensure performance.
- Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check StockDorman 594-127 Engine Harmonic Balancer Compatible with Select Chevrolet / Pontiac Models
- Ideal replacement - this harmonic balancer assembly exactly matches the fit and function of the original harmonic balancer for a direct replacement.
- Durable construction - this harmonic balancer features a rubber vibration damper bonded between ductile steel components.
- Cost-effective solution - this balancer assembly offers original equipment quality at a competitive price.
- Quality tested - this harmonic balancer has undergone dimensional verification, material validation and functional testing to ensure performance.
- Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check StockDorman 594-795 Engine Harmonic Balancer Compatible with Select Ford/Lincoln Models
- Ideal replacement - this harmonic balancer assembly exactly matches the fit and function of the original harmonic balancer for a direct replacement.
- Durable construction - this harmonic balancer features a rubber vibration damper bonded between ductile steel components.
- Cost-effective solution - this balancer assembly offers original equipment quality at a competitive price.
- Quality tested - this harmonic balancer has undergone dimensional verification, material validation and functional testing to ensure performance.
- Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check StockDorman 594-115 Engine Harmonic Balancer Compatible with Select Cadillac / Chevrolet / Pontiac Models
- Ideal replacement - this harmonic balancer assembly exactly matches the fit and function of the original harmonic balancer for a direct replacement.
- Durable construction - this harmonic balancer features a rubber vibration damper bonded between ductile steel components.
- Cost-effective solution - this balancer assembly offers original equipment quality at a competitive price.
- Quality tested - this harmonic balancer has undergone dimensional verification, material validation and functional testing to ensure performance.
- Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check StockDorman 594-080 Engine Harmonic Balancer Compatible with Select Ford / Lincoln / Mercury Models
- Ideal replacement - this harmonic balancer assembly exactly matches the fit and function of the original harmonic balancer for a direct replacement.
- Durable construction - this harmonic balancer features a rubber vibration damper bonded between ductile steel components.
- Cost-effective solution - this balancer assembly offers original equipment quality at a competitive price.
- Quality tested - this harmonic balancer has undergone dimensional verification, material validation and functional testing to ensure performance.
- Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock
OEMTOOLS 27306 Long-Reach Harmonic Balancer/Pulley Installer, Extra Long Forcing Screws for Hard to Reach Balancer Pulleys
- MANY APPLICATIONS: The forcing fasteners in this harmonic balancer puller fit a wide variety of V8 and V6 vehicles.
- M16 x 2.0 mm (GM), M14 x 1.5 mm (Dodge, Chrysler, and Jeep), M12x 1.75 mm (Dodge Chrysler, and Jeep), and M12 x 1.5 mm (Ford).
- SAVE TIME AND MONEY: Car repairs can be expensive.
- By using this harmonic balancer installer, you will be saving over $600.
- You can also save time with this balancer installation tool by not waiting for repairs at the auto shop.
- CONVENIENT PACKAGE: All of the pieces in this harmonic balancer installer kit come in one convenient package, making the pieces both easy to find and easy to store.
- Never worry about losing pieces with this harmonic balancer puller set.
- EASY TO USE: Assemble the threaded rod nut bearing with the bearing facing away from the hex.
- Insert the threaded rod through the balancer and fastener into the crankshaft.
- Use a second wrench to rotate the assembly.
- EFFECTIVE: The three puller arms have a significant bite to grip and remove pressed-on harmonic balancers.
Check Stock
