Categories

Best Spring Foot Valve

Valve Spring Shim - 1.500\ OD.645\ ID .060\ Thickness

  • Must-Have for Your Next Engine Build or Spring Upgrade - Production tolerances in cylinder heads, valve lengths, valve springs, retainers and locks can impact the valve spring installed height from valve to valve, greatly impacting spring seat and open pressures. COMP Cams spring shims are a must-have to ensure precise installed height on intake and exhaust valves..
  • Guaranteed Precision - COMP Cams shims are crafted from the finest shim stock steel to precise dimensions, ensuring consistent installed height adjustments from the first valve to the last..
  • Race Tough - COMP Cams valve spring shims are not only made from the highest quality shim stock available, they are also heat treated to withstand the most radical camshaft profiles..
  • 1.500" Outside Diameter, 0.645" Inside Diameter. Includes 1 0.060" Thick Shim..
  • Recommended for use with our 916, 26056, 917, 928, 929, 924, 925, 911, 954, 936, 938, 930, 953, 999, 26094, 943, 26055, 939, 927, 919, 933, 935, 944, 26095, 26097, 932, 26089,955, 26115, 26099 and 26547 springs..
  • Available in an assortment pack under part number 4757..
Check Stock

Outdoor Water Solutions ARS0026 7-Inch Airstone Diffuser

  • This is a 7" diffuser airstone with a 1/2" male npt fitting that fits our airstone foot valve which is also called an inline backflow valve.
  • Note: shallow or larger ponds may require multiple airstone diffuser kits..
  • Note: this air stone require an airstone foot valve to prevent water from backing up into the airline..
Check Stock

Howards Cams 96210-30-1: Valve Spring Shim; 1.250 .030

  • Valve Spring Shim Outside Diameter: 1.250.
Check Stock

Valve Spring Compressor, Auto Compression Clamp Tool Service Kit for ATV, Car, Motorcycle,Small Engine Vehicle Equipment,Valve Spring Compressor ToolsAutomotive Tool C Clamp Service Set,10 Pcs

  • Valve Spring Compressor C Clamp Tool Set Service Kit includes 5 adaptors to correctly fit, install, and remove automotive valve springs,Suitable for your motorcycle, ATV, UTV, car, and other small engine vehicles and equipment.
  • All collets are 1.75 inches (4.4cm) long with 9.5-inch (24.1cm) maximum jaw openings.
  • Valve Spring Compressor Small Engine, This toolset is used to easily and safely compress valve springs for removal or installation.The forged steel construction of this set provides superior strength and hardness. The C-Clamp will not bend or twist under the stress of compressing valve springs. The oxide finish on the set components resists rust and corrosion. The surface finish of each part is smooth and provides for easy use under high compression..
  • Valve Spring Compressor Tools -come packaged in a high-impact case that holds each part securely. The parts will remain organized and safe while stored or in transport, and the case stacks and stores away conveniently.1 x Spring Compressor ""C"" Clamp ,5 x Adaptors ,3 x Extension Screws ,1 x Compression Bar ,1 x Storage Case.
  • Solid Valve Spring Compressor Kit to effortlessly reset your valve springs. The Orion Kit comes fully stocked with 5 collets to fit hundreds of makes and models, such as motor....
Check Stock

Stud Mount Valve Spring Compressor Fits For All 3/8 and 7/16 Rocker Studs Alternative to Part # 66784 62370

  • APPLICATION: Universal valve spring remove tool fits for all 3/8'' and 7/16'' rocker studs, specially designed for compressing valve springs with the....
  • FUNCTION: Simplifies between-rounds valve spring changing. Easily and quickly replace valve springs, remove valve spring from an assembled engine for....
  • Easy to use: The tool disassembles easily. Use the principle of leverage, press down to compress coil spring, then remove valve keepers, and release....
  • MATERIAL: Made of heavy-duty steel, treated with anti-rust and anti-corrosion, solid and durable. A strong, durable handle withstands the most extreme....
  • Satisfaction Guarantee--100% satisfaction guarantee. Please feel free to contact us if you have any questions about our product..
Check Stock

labwork Universal Overhead Valve Spring Compressor Valve Removal Installer Tool for Quick Removal of Valve Springs

  • This product is designed for quick removal of the valve spring without removing the cylinder head,fit for most cars and light trucks..
  • Offset pliers facilitate clamping and compression of valve springs..
  • Surface blackened treatment,rust-proof and corrosion-resistant..
  • Perfect for removing valve springs,spring retainers by compressing the valve spring retainer and exposing the valve keeper,remove keepers,uncompress the tool then remove spring..
  • If you have any problem after receiving it,please contact us and we will solve it for you..
Check Stock

Tool Daily Pressure Washer Foot Valve for Sewer Jetter Kit, as Power Washer Ball Valve, 4000 PSI

  • Package include: 1-piece Foot Valve for sewer jetter kit, 1-piece coupler (3/8’’ quick connect socket+ M22 14mm male), 1-piece coupler (3/8’’ quick coupler plug + 3/8’’ male thread), 1-piece adapter (3/8’’ quick coupler socket + 3/8’’ male thread), 1-piece adapter (3/8’’ quick connect socket + 3/8’’ female thread)..
  • Operators of sewer jetting need both hands free to feed or retract the sewer jetter hose in the sewer line. Foot operated valve for sewer jet allows hands-free control..
  • Foot Valve for Pressure Washer Sewer Jetter Inlet: 3/8” female NPT. Foot Valve Sewer Jet Kit for Pressure Washer Outlet: 1/4’’ female NPT. Max Flow: Up to 8 GPM. Max Temperature: 320 °F. Maximum Pressure: 4000 PSI..
  • Steel Cover for safety, Heavy gauge steel construction for durability & stability. Pedal and valve ball are in protective housing..
  • Foot Valve for Sewer Jetting is excellent accessory for sewer hose operation. Inlet & outlet positioned to help keep hose out of the way. Sewer jetter kit for pressure washer also can be used in other applications..
Check Stock

EWK 2 Sizes Valve Spring Compressor Kit, Valve Keeper Remover/Installer, Retainer Removal Tool for Motorcycle, Car

  • 【 Highly Versatile 】 Specially designed to remove valve spring quickly without removing cylinder head. Works on gas or diesel overhead valve engines of automobiles, motorcycles, and boats..
  • 【 Easy Operation 】 No need the painful C-clamp valve spring compressor anymore! This tool fast removes and installs valve keepers on most overhead valve engines with valve stems from 4.5 to 7.5mm and 7.9 to 9.5mm..
  • 【 Smart Design 】 EWK Valve Keeper Tool has built in magnet, immediately attracts the keepers up before they dropping into the engine to avoid any potential damage. Simply push or tap the tool by hand or with a hammer to disassemble the valve set..
  • 【 High Quality 】 Made of rust-resistant material, the valve tool will neither bend nor the valve spring get loosen. Built to last for a life time use, the real money saver for your professional workshops or garages..
  • 【 EWK Assurance】Excellent WorKing experience guaranteed! EWK provides you premium quality tools and the best service with 12 months warranty. If there is any problem or concern with our products, please contact us for assistance..
Check Stock

Hydraulic Loader Directional Control Valve LV22RFSTKAB Joystick Regen - 10GPM 4000PSI

  • SPECIFICATIONS: Our 2 spool directional control valve for double-acting hydraulic rams has 21 GPM, 3 position spring center and 4 positions, SAE 10 inlet and work ports and SAE 12 outlet ports. This hydraulic flow control valve has 4-way valving, adjustable 1500 with 3625 PSI..
  • VERSATILE: This G series P80 DCV has a 3 position spring center and 4 positions that allows an actuator to open and close. This 2 spool control valve can be used in any hydraulic circuit..
  • PRECISE FLOW: Simple and compact, the hydraulic joystick valve has one spool with a 21 GPM flow rate that precisely controls the direction of the flow of hydraulic fluids. This plow valve has a wide range of applications, including in log splitters..
  • MANUAL CONTROL: This high-pressure control valve comes with a joystick lever actuator for controlling the spool. You can control the log splitter valve manually, without an external, additional control system..
  • TANDEM CENTER: This adjustable relief valve is equipped with a spring tandem center. Since the fluid directly flows back to the hydraulic tank the hydraulic orbit motor prevents overheating and reduces noise during operation..
Check Stock

16 Pack Performance Beehive Valve Springs Kit Compatible with 2002-2017 Cadillac CTS Chevrolet Camaro Corvette SS SSR Trailblazer Pontiac G8 GTO Fit for Engine LS1 LS2 LS3 LS6 LS9 8 Cyl Part# 12499224

  • ✅【VALUABLE CHOICE】 ➤ Durable material to meet or exceed OE standard quality. ➤ Valve spring assembly with superior strength, durability and valve train stability, no matter what the application. Easily handle the increased lift in extreme stress applications. ➤ Durable construction delivers long-lasting valve springs. ➤ Decent price for valve spring kit Set of 16..
  • ✅【FIX VALVE SPRINGS FAILURE SIGNS】Engine misfire, Tapping or ticking noise, Backfire, Compression loss..
  • ✅【SPECIFICIATION VALVE SPRINGS】➤ Beehive-style, Complete Set of 16 ➤ Outside diameter of outer spring: 1.290 in ➤Coil Bind Height 1.220 in ➤ Spring rate: 375 lbs./in ➤ Max lift .550''.
  • ✅【EXCAT MATCH】 Fit for GM Engine: LS1, LS2, LS3, LS6, LS9, 8 Cyl ➤Compatible with Cadillac CTS 2004-2007 5.7L 6.0L ➤Compatible with 2010-2015 Chevrolet Camaro 6.2L ➤Compatible with 2002-2013 Chevrolet Corvette 5.7L/6.0L/6.2L ➤Compatible with 2014-2017 Chevrolet SS 6.2L ➤Compatible with 2005-2006 Chevrolet SSR 6.0L ➤Compatible with 2006-2009 Chevrolet Trailblazer 6.0L ➤Compatible with 2009 Pontiac G8 6.2L ➤Compatible with 2005-2006 Pontiac GTO 6.0L.
  • ✅【OE PART NUMBER】Single spring: 12625033.
Check Stock

COMP Cams 4705-16 ID Spring Locator Set of 16-1.300\ OD.570\ ID.060\ Thickness

  • Race Ready - Older style standard shims will not hold up to extreme spring pressures and high RPM's found in today's street and racing engines. COMP's hardened steel alloy seat ensures spring stability, durability and high RPM performance..
  • Fewer Shims, More Stability - Stacking shims is not the best way to set up valve springs to their appropriate installed height. Since they are available in multiple locator thicknesses, these locators eliminate the need to stack shims, while also adding to valvetrain stability and durability..
  • Protect Your Head - Valve springs should never be installed directly on aluminum heads. Protect your expensive cylinder heads by installing springs on our hardened steel spring locators..
  • Made to Measure - Made for both factory and aftermarket cylinder head dimensions, these spring seats are available for nearly any engine. With options in multiple O.D.'s (outside diameters), I.D.'s (inside diameters) and thicknesses, COMP has a locator to fit your valvetrain project..
  • Precision Machined for Consistency - Crafted in-house, using the best machining equipment, COMP Cams seats and locators are precision machined to ensure consistent thickness and inside/outside diameters for a perfect fit everytime..
Check Stock

Valve Spring Compressor for Dodge 5.7, 6.1, 6.2 and 6.4L HEMI

  • Designed specifically for Dodge 5. 7, 6. 1, 6. 2 and 6. 4L HEMI.
  • Allows for the easy removal and installation of valve springs without the need to remove cylinder heads.
  • Bolt-down design makes for a quick and easy install, while a unique lead screw and cage design compresses the spring, freeing up your hands for easy access to the valve locks.
  • The spring cage is compatible with factory and most aftermarket valve springs.
  • Manufactured from high-strength billet steel that will not bend or wear out like competitors' inferior aluminum valve spring compressors.
Check Stock

kipa 385314349 RV Water Valve Assembly Camper Trailer Boat Toilet Repair Kit for Sealand EcoVac Vacuflush Pedal Flush Toilets, Replacement for Most Dometic Foot Pedal Toilets Except 300 310 320 Model

  • 385314349 Water Valve - This Easy to install, Replacement water valve is for SeaLand Marine VacuFlush, RV Traveler and SeaLand Low Flush Foot Pedal Toilets. Fits several SeaLand Toilet Foot Pedal Models.
  • New Foot Pedal 385314349 Water Valve Replace OE Part Number 3754, 5996, 5997, 8290, 123-8290, 314349.
  • Water Valve Assembly 385314349 will fit For Dometic Sealand, Traveler, VacuFlush and Dometic Pedal Flush Toilets - 110,111,147,148, 210, 211, 248, 506, 508, 509, 510, 511, 547, 548, 558, 706, 806, 808, 847, 848, 906, 908, 910, 911, 1006, 1008, 1047, 1048, 1147, 1148, 2010, 2011, 5006, 5047, 5048, 5049. Does NOT replace water valve on 300, 310 or 320 series..
  • This Water Valve Assembly will fit For EcoVac 146-149, VacuFlush 168, 606, 647, 648,1006,1008,1047,1048, 1049,1106, 5146, 5147, 5148, 5149, Toilets.
  • How to Replace the water Valve Kit? You may read the manual instruction as below, If you are still confused, You may seach "How to replace 385314349 Water Valve" on youtube, You will find the video, It may be easier.
Check Stock