Categories

Best Spring Loaded Check Valve

FibroPool 2" POSI- Close Non- Lube Check Valve…

  • ++ Fibropool 2" Posi-Close check valve. it features 2" slip ports. Your 2" pipe will glue inside the port..
  • ++ The valve is Spring loaded to open at 5 PSI..
  • ++ CPVC construction allows temperature and impact resistance..
  • ++ Serviceable, but does not need grease or lube, PTFE seats are lubeless..
  • ++ Ideal for heater and chemical dispenser/ salt generator installations..
Check Stock

SharkBite 1/2 Inch Check Valve Push to Connect Brass Plumbing Fitting PEX Pipe Copper CPVC PE-RT HDPE U2008-0000LFA

  • SHARKBITE BRASS CHECK VALVE: This push-to-connect brass check valve allows you to prevent the reverse flow of water quickly and easily.
  • ideal for working in tight spaces **Remove using a disconnect clip or disconnect tongs**.
  • VERSATILE: Pushfit spring-loaded check valves work well with PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes.
  • EASY TO INSTALL: The innovative push-to-connect design of the SharkBite brass check valves allows for quick and easy installation, with no tools, crimping, glue, or soldering required.
  • can be installed horizontally or vertically.
  • PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use suitable for commercial repairs or home improvement projects.
  • SPECS: Made with DZR forged brass, this check valve can withstand 200 degrees F and 150 PSI.
Check Stock

OTC 4573 Universal Overhead Valve Spring Compressor

  • OTC's Universal Overhead Valve Spring Compressor is a great option for compressing valve springs - facilitating valve spring removal or valve stem....
  • Ideal for use on installed cylinder heads, especially in vehicles with tight underhood clearances, but can be used for bench work as well.
  • Spring loaded jaws easily grip and compress valve springs.
  • Legs designed with a built-in offset to compensate for spring wind - keeping tool vertical and stable during use.
  • fits valve spring retainers up to 1-13/16 inch diameter.
Check Stock

Campbell Mfg Llc 2\ Quietsewage Chk Valve B-0823-20C Well Supply Accessories

  • ++ Fibropool 1 1/2" Posi-Close check valve. it features 1 1/2" slip ports. Your 1 1/ 2" pipe will glue inside the port..
  • ++ The valve is Spring loaded to open at 5 PSI..
  • ++ CPVC construction allows temperature and impact resistance..
  • ++ Serviceable, but does not need grease or lube, PTFE seats are lubeless..
  • ++ Ideal for heater and chemical dispenser/ salt generator installations..
Check Stock

1 x 11 Tank Tee Kit with UNIOn + VALVES Installation Package for Water Well Pressure Tank with SQUARE D 40/60 FSG2 pressure switch NO LEAD

  • Sump Pump Silent Clear Check Valve MODEL RFF15NC.
  • Clear valve body so that water movement is visible.
  • The unique Stainless Steel spring loaded flapper eliminates the nuisance water hammer noise of standard check valves.
  • 100% Stainless steel clamps included-fits 1-1/2" pipe.
Check Stock

LUMAX LX-1404 Silver 90 Degree Grease Coupler for Hard-to-Reach Grease Fittings on Cars, Trucks, Farm Equipment. Ideal for Lubrication of Front and All-Wheel Drive Vehicles.

  • For use with most hand-operated grease guns.
  • Spring-loaded ball check valve to prevent leakage.
  • Quick connect with a spring loaded sleeve.
  • Designed for hard-to-reach grease fittings.
  • Maximum operating pressure of 4, 500 PSI.
Check Stock

LockNLube 90 Degree Grease Coupler Adapter

  • Spring-loaded collar for extra-sturdy connection.
  • Easily connect to LockNLube and other couplers when needed.
  • Three hardened steel jaws, rubber seal, and check valve make a tight, reliable connection.
  • Right angle adapter for hard-to-reach fittings.
Check Stock

AZUNO Standard Grease Couplers 1/8 NPT Grease Gun Tips Heavy Duty 2 Pieces

  • Has four hardened steel jaws for durability.
  • Spring-loaded ball check valve to prevent leakage.
  • Knurled body and flats for easy installation/removal.
  • Small outside diameter permits easy contact with recessed fitting.
Check Stock

4 Way Gas Distribution Co2 Distributor Manifold With 5/16 inch Barb/Stem Splitter Beer Integrated Check Valves for Homebrew Beer Making Brewing Tool

  • ???? Gas Manifold, Machined from a single piece of aluminum with built-in check valve protects your shunt and prevents gas backflow..
  • ???? Designed with a 2-point screw hole on the top for easy installation to other equipment. 5/16″ threaded ports barbed inlet and 5/16″ barbed outlets..
  • ???? The distributor allows you to split the gas supply into multiple lines. Each line has its own shutoff valve. Chrome Plated valves with spring loaded Ball check valve. Run with 4 lines from one CO2 source..
  • ???? Due to the one-way valve mechanism, the pressure drop between the ball valves in these manifolds is approximately 2 psi. You will need to set the pressure on the regulator to 2 psi above the pressure required in the keg.).
  • ???? Made of prime aluminum, brass and stainless steel material, which is extremely durable. MONEY-BACK GUARANTEE -customer satisfaction is our #1 policy!. If you are not satisfied with our product or if you experience any issues, Please contact us.
Check Stock

KIMISS Car Transmission Solenoid Valve 28250-PRP-013 for Honda and Acura Models Transmission AT Clutch Pressure Control Linear Solenoid Valve 13 * 7cm / 5.1 * 2.8in

  • 【Main Function】This Transmission Solenoid Control Valve is consisting of a spring loaded plunger wrapped with a coil of wire, designed to open or close valves in the valve body to allow transmission fluid to enter..
  • 【Specially for for for for Honda Models】Our Transmission Linear is Specially designed to fit For Acura & for for for Honda vehicles. Please check the size and compatibility carefully before placing an order..
  • 【Professional OE Level】The prossional car transmission shift solenoid valve is an important vehicle electrical system executive control part with higher stablity and reliability, meeting or exceed OEM standards. The replaceable OE number for reference: 28250-PRP-013..
  • 【High Quality Construction】Made of high grade iron, the AT Clutch Solenoid Valve is of strong strength, high temperature and resistance for long time use..
  • 【Easy Installation】Plug and play. Easy to install without extra adjustment, perfectly match the original car. Convenient for assembly and disassemble.If you have any questions, please feel free to firstly check product description for a good solution..
Check Stock

NIBCO F910B-LF Silent Check Valve Lead-Free* Class 125 Flanged Bronze Seat 4

  • The NIBCO lead-free cast iron sliding disc silent check valve is spring actuated with renewable cast bronze seat and bronze disc.
  • The spring return reduces noise for quiet operation.
  • The wafer style check valve features a flanged wafer body style to fit between standard flanges.
  • The check valve is recommended for commercial and industrial water applications.
  • Lead Free refers to the wetted surface of pipe.
  • fittings and fixtures in potable water systems that have a weighted average lead content ≤ 0.25% per the Safe Drinking Water Act (Sec. 1417) amended.
  • Spring actuated (1/2 psi cracking pressure).
Check Stock

Watkins Replacement Water Check Valve for Hot Springs Spa, 3/4" - 35233

  • This 3/4″ water check valve is installed in the inlet side of the circulation pumps plumbing to prevent the back flow of water through the circulation pump once the jet pump is activated.
  • Works on Tiger River Spas, Hot Spring Spas, and Limelight Spas..
  • All water check valves have arrows stamped on the outside to indicate the direction of flow which should be pointer towards the circulation pump..
  • Troubling Shooting: The symptoms of a non-operative check valve are.
  • * Water Leak – If water is leaking from around the check valve, it should be replaced. * Rattling – A rattling check valve indicates that water is not being allowed to flow properly past/ through the check valve. * Verify the check valve is installed with the flow in the correct direction. * Heater High-Limit Tripping – Poor water flow through the check valve could lead to heater high-limit tripping. Ensure the check valve is n.
Check Stock

NIBCO F910B-LF Silent Check Valve Lead-Free* Class 125 Flanged Bronze Seat 2-1/2

  • The NIBCO lead-free cast iron sliding disc silent check valve is spring actuated with renewable cast bronze seat and bronze disc.
  • The spring return reduces noise for quiet operation.
  • The wafer style check valve features a flanged wafer body style to fit between standard flanges.
  • The check valve is recommended for commercial and industrial water applications.
  • Lead Free refers to the wetted surface of pipe.
  • fittings and fixtures in potable water systems that have a weighted average lead content ≤ 0.25% per the Safe Drinking Water Act (Sec. 1417) amended.
  • Spring actuated (1/2 psi cracking pressure).
Check Stock