Categories

Best Spring loaded End Fittings

Nilight 4-Way Flat to 7-Way Round RV Blade Trailer Adapter Reverse Plug with mounting Bracket, 2 Years Warranty

  • This adapter converts 4 way flat vehicle end to 7 way blade trailer end, makes tight connection between vehicle socket and trailer plug, no wiggle-room, no loose fittings. Transfers the power from the vehicle to trailer. voltage range: 6-24 Volts.
  • 4-pin flat socket designed to be converted to the 7-pin blade round type socket. Works on most vehicle wiring component like turn signals, brakes,reverse light and auxiliary power..
  • Heavy duty black plastic construction prevents rusting, enhances appearance. Well sealed spring loaded cover increases protection against dust, moisture and corrosion..
  • Wide Application: Suitable for most trailers, semitrailers, caravans, RV. Commonly used with T-connectors or tail lamp converters with 4-way flat car end connections.
  • Package include: 1x Trailer Adapter Plug, 1xMounting bracket 6 screws and 6 nuts..
Check Stock

Aluminum Track Tiedown Fitting 5,000 lb. Capacity Tiedowns 8-Pack

  • This listing is for eight (8) double stud fittings with a RATED CAPACITY* of 5,000 lbs. The W.L.L.** (working load limit) is a 1,666 lb. capacity. This fitting fits all aluminum track that is similar to the track shown in the secondary image above. We refer to the track as aluminum load track. It is also commonly referred to as airplane track, seat or simply S track..
  • RATED CAPACITY: Also known as assembly capacity or break strength is the minimum load a complete assembly can withstand before failure in a laboratory pull test when the product is new. **W.L.L. The maximum load weight a tie-down should be subjected to during normal use. To assist in making the proper tie-down choice the Federal D.O.T. requires the W.L.L. to be 1/3 of the Rated Capacity..
  • The fitting is SPRING LOADED to permit simple attach and detach operation. To detach, simply pull up on the spring loaded mechanism and then slide forward or back and the fitting releases. To attach, rest the fitting in the load track, then push down on the base and push forward..
  • Double stud refers to the number of "fingers" that it captures when attached to the aluminum track. Base measures 2-1/2" long x 7/8" wide. 1/4" thick steel "O" ring measures 2" in diameter, large enough and plenty strong enough ....
Check Stock

US Cargo Control 93" -104" (7 ft 7 in.-8 ft 6 in.) E Track Load Bar - Adjustable Aluminum E Track Shoring Beam/Decking Beam with Patented Flat Latch for Trailers, Trucks, Semi-Trucks - 4 Pack

  • MAXIMUM SECURITY - Organize your trailer or truck with Etrack load bars that work as divider bars to mount parallel and create sections or deck them as shelves. An adjustable load bar helps prevent items from shifting on speed bumps and curvy roads..
  • SUPERIOR STRENGTH - US Cargo Control's Cargo E-Track Load Locks are durable and lightweight, thanks to their heavy-duty aluminum finish. The cargo bars' unique construction maintains aluminum's lightweight properties while maximizing strength..
  • SIMPLIFIED TRIGGER RELEASE - Zinc Plated Steel End Fittings are easy to release from the track while wearing gloves, and the release on the end fitting's side eliminates risk of top latch being bent or damaged. Positive engagement into E or A Tracks..
  • SUPPORTS 1.1 TONS - US Cargo Control's E Track Cargo Bars handle 1.1 Tons, which is a working load limit of 2,200 pounds. Great alternative to cargo nets and makes a perfect cargo stabilizer to store large and heavy loads without any worries..
  • SPECS: 4 Aluminum E Track Load Bar | Extends from 93" to 104" (7 ft 7 in-8 ft 6 in) | Finish: Aluminum | Weight: 19 pounds (per Single Load Bar) | Vertical and Horizontal Working Load Limits: 2,200 lbs. | Zinc Plated Steel End Fittings..
Check Stock

Silver 90 Degree Grease Coupler Adapter Grease Gun Coupler 90 Degree Grease Gun Fittings 3 Jaw Angle Adapter Coupler Swivel Snap Right Fitting Tool for Farm Truck Auto Industrial Use()

  • ...0 degree crease couplers are sturdy and durable, the surface is galvanized, which can prevent corrosion to the largest extent and has a longer service life, durable and sturdy, not easy to break, can be applied for long term.
  • Easy to operate: designed with 90 degree, this grease coupler can grease hard to reach zerk fittings in tight spaces, convenient for you to connect some difficult fittings, the 3 jaw coupler design snaps on and off grease fittings easier.
  • Multiple function: the 90 degree crease coupler can be applied for auto, farm, truck or industrial using, good for hard-to-reach grease fittings on cars, trucks, farm equipment and more, it can be also suitable for most hand-operated grease tools, with working pressure range for 3000-4500PSI.
Check Stock

Lisle 39210 Main Fuel Line Disconnect

  • GET THE JOB DONE: The ABN | Master Deluxe AC Line Disconnect Tool Fuel Disconnect Tool Set offers a wide range of tool sizes to separate quick disconnect fittings on oil/fuel lines, heater lines, and AC cooling lines.
  • FITS YOUR VEHICLE: Fuel line and AC tools for automotive applications are compatible with several Ford, GM, Mazda, and other vehicles with automatic transmission lines.
  • Measure your application to ensure correct fitment.
  • EASY TO USE: Each fuel tool is color-coded by size for easy identification.
  • Simple one-handed operation with easy-grasp end and unique offset design to access hard-to-reach confined or obstructed areas.
  • Release the fuel line locking mechanism by listening for the slight “click” that means that it has done its job for easily removal.
  • BUILT TO LAST: Each fuel line quick disconnect heater hose disconnect tool is constructed from hard plastic for strength and longevity that resists rust and corrosion.
  • Spring-loaded fuel line tools design allows to easy opening and spring closing when pressure is released.
  • PACKAGE CONTENTS: Package contains (6) fuel line pliers transmission tools – Red 5/16-inch (8mm), gold 3/8-inch (9.5mm), dark gray 1/2-inch (13mm), blue 5/8-inch (16mm), black 3/4-inch (19mm), silver 7/8-inch (22mm).
Check Stock

AutoXscan AC Disconnect Fuel Line Disconnect Tool Set – Fuel Line Tool Fuel Line Removal Tool 7pcs Kit 1/4-7/8 inch

  • Suitable for : Fuel line and AC tools for automotive applications are compatible with several Ford, GM, Mazda, and other vehicles with automatic transmission lines.
  • Measure your application to ensure correct fitment..
  • Package contains (7) fuel line pliers transmission tools:1/4 inch, 5/16 inch, 3/8 inch, 1/2 inch, 5/8 inch, 3/4 inch, 7/8 inch..
  • AC Line Disconnect Tool Fuel Disconnect Tool Set offers a wide range of tool sizes to separate quick disconnect fittings on oil/fuel lines, heater lines, and AC cooling lines..
  • Simple one-handed operation with easy-grasp end and unique offset design to access hard-to-reach confined or obstructed areas.
  • Release the fuel line locking mechanism by listening for the slight “click” so easily to use..
  • Each fuel line quick disconnect heater hose disconnect tool is constructed from hard plastic for strength and longevity that resists rust and corrosion.
  • Spring-loaded fuel line tools design allows to easy opening and spring closing when pressure is released..
Check Stock

US Cargo Control Enclosed Utility Trailer E Track Starter Kit, Convenient E Track Kit Includes E Track Rails, Cargo Straps, Fittings, End Caps and Storage Bag, Easily Secure Cargo in Your Trailer

  • CONVENIENT TRAILER E TRACK KIT - This kit includes everything you need to get you started with your E Track System! The kit includes E Track Rails, Ratchet Straps, E Track Fittings with O-Ring, J Hook Fittings, End Caps and a storage bag!.
  • EASY TO USE - The included Cargo Straps, O-Ring Tie Downs, J-Hook Fittings, and Storage Bag all have E-Fittings which makes it easy to snap them in and out of the E Track Rails so you can customize your setup depending on what you are hauling..
  • BUILT TO LAST - Our E Track Rails, Cargo Straps, and E Track Accessories are made from high-quality materials such as galvanized steel and 6,000 lbs polyester webbing. They're strong and durablE - so you can secure your cargo with confidence..
  • KIT INCLUDES - (4) 5' Horizontal E Track Rails, (8) Plastic End Caps, (6) Straps (12', 16' and 20', 2 each), (4) O-Ring Fittings, (2) 2" J Hook Fittings, (2) 4.5" J Hook Fittings and (1) Storage Bag. NOTE: Hardware to fasten the Track not included..
  • SPECS - E Track Rails Made of 12-gauge Galvanized Steel | Cargo Straps Working Load Limit (WLL): 1,467 lbs. |....
Check Stock

CargoSmart Motorcycle Wheel Chock — Connects to X-Track and E-Track Systems — Fits Up to 7” Wide Tires

  • HEAVY DUTY WHEEL CHOCK — Fasten the CargoSmart Motorcycle Wheel Chock to your trailer floor to help stabilize your bike when on the move. Fits up to 7” wide tires.
  • STABILIZE YOUR BIKE — Wheel chock helps stabilize the front or rear wheel of your motorcycle during transportation.
  • To properly secure your motorcycle, always use with tie down straps.
  • SPRING-LOADED FITTINGS — Simply clip the wheel chock's spring-loaded fittings into the X-Track or E-Track system for a safe and secure connection.
  • EASILY REMOVABLE — The connectors allow you to easily move or completely remove the wheel chock as organization changes are needed.
  • Use the mounting holes to permanently attach the wheel chock to the trailer floor.
  • CARGOSMART — Our mission is to engineer cargo management solutions to safely & securely get you to where you’re going Our bike/sports racks, cargo carriers, ramps, & organizational solutions work as hard as you do – on the job or next outdoor adventure.
Check Stock

8MILELAKE Single Stud L-Track Fitting with Round Ring 10 Pack

  • Easily mounts and dismounts, The fitting is Spring Loaded to permit simple attach and detach operation. To detach, simply pull up on the spring loaded mechanism and then slide forward or back and the fitting releases. To attach, rest the fitting in the load track, then push down on the base and push forward..
  • Single Stud with Round Ring Straight Pull 4,000 lbs.
  • The fittings' aluminum base and stainless steel ring will not rust. The steel stud/center post is zinc plated to inhibit corrosion..
  • 10 Pieces Single Stud Fitting with Stainless Steel Ring are Included.
  • Great for ATV's, motorcycles snowmobiles, cargo, furniture, and much more.
Check Stock

Uncle Mike's QD 115 Swivel - Tri-Lock - Rifle Swivels QD Rug Blued 1', Clam 14612

  • QD design stops metal swivel body from contacting gun.
  • Fore-end adapter with stud installed in the barrel of gun.
  • .5-inch wood screw for fore-end stock mounting.
  • Swivelock® spring-loaded plunger and knurled, threaded sleeve eliminates accidental opening of swivel.
  • Fore-end adapter fits barrel band of 10/22, .44 Mag. and No. 3 carbines.
  • ½" wood screw for fore-end stock mounting.
  • Swivel Lock spring-loaded plunger and a knurled, threaded sleeve eliminates accidental opening of the swivel.
Check Stock

GunVault Minivault Standard Digital Pistol Safe GV1000C-STD

  • Heavy gauge steel housing with tamper proof spring loaded door.
  • Fingerprint recognition with a high performance algorithm to achieve speedy identification and a very low false reject rate (frr).
  • Accepts up to 20 fingerprints and updates slight changes that may occur over time to an enrolled fingerprint.
  • Foam lining inside to protect the firearm or other valuables.
  • Precise fittings are virtually impossible to pry open with hand tools.
  • Protective foam lined interior, with tamper resistant, spring loaded door.
  • Tamper indicator alerts invalid entry attempts.
  • Mounts almost anywhere, in any direction.
  • Learn buttons make it easy to program over 12 million user selectable access codes.
Check Stock

Trekassy 8ft Horizontal E-Track Tie-Down Rail Kit with 8 Steel O-Ring Anchors and 8 Rope Tie Offs for Truck Bed, Trailers

  • ...nize SOLID STEEL for ultimate weather-resistant, rust- and corrosion-resistance, strong enough for both indoor and outdoor use..
  • EASY TO USE: Simply mount the e track rail on your trailer wall or floor, press the lever on the spring fitting end attachments, then Insert the fittings into the slots of the E Track Rail to create a secure tie down track system for ATV, UTV, car, or motorcycle wheels..
Check Stock

Trekassy 6 Pack 5ft E Track Tie-Down Rails, Horizontal E-Track Rail Kits with 6 Steel O-Ring Anchors for Enclosed Trailers, Trailer Beds, Pickups, Trucks

  • MONEY-SAVING : 6 Pack of 5' horizontal e track rails + 6 Pack of 2" E-track O rings, combo kit much more cheaper than buying separately. Covered by 3 Years Warranty..
  • STRONG and HEAVY DUTY: E-Track Rail: 6,000Lbs Breaking strength + 2,000Lbs Working load. E-Track O-Ring Anchors: 4,500Lbs Breaking strength + 1,500Lbs Working load for each. Safety secure your cargo and loads..
  • UNIVERSAL and FLEXIBLE: The E-Track tie-down rail kits are universal, great for trailers enclosed box trucks, cargo vans, flatbed, RVs, warehouses, garages. Also a great tie-down system for ATV, UTV, and motorcycles..
  • Durable and HIGH QUALITY: Both E-Track Tie-Down Rail and O-Ring Anchors are made out of Galvanize SOLID STEEL for ultimate weather-resistant, rust- and corrosion-resistance, strong enough for both indoor and outdoor use..
  • EASY TO USE: Simply mount the e track rail on your trailer wall or floor, press the lever on the spring fitting end attachments, then Insert the fittings into the slots of the E Track Rail to create a secure tie down track system for ATV, UTV, car, or motorcycle wheels..
Check Stock