Best Springfield Taper Lock Bushing

TB Woods 1108 TL110822MM Taper Lock Bushing, Cast Iron, 22 mm Bore, 1200 lbs/in Torque, Standard Design, Standard Keyway

Taper lock bushing with a torque capacity of 1,200 in-lbs for mounting a pulley, sheave, or sprocket on a drive shaft.
Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
Cast iron for resistance to wear, galling, and corrosion.
Keyed to the shaft to prevent the shaft from rotating in the bushing.
Interchangeable with taper lock bushings from various manufacturers.

TB Woods 2517 TL251758 Taper Lock Bushing, Cast Iron, Inch, 0.625\ Bore, 1200 lbs/in Torque, Standard Design, Standard Keyway

Taper lock bushing with a torque capacity of 1,200 in-lbs for mounting a pulley, sheave, or sprocket on a drive shaft.
Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
Cast iron for resistance to wear, galling, and corrosion.
Keyed to the shaft to prevent the shaft from rotating in the bushing.
Interchangeable with taper lock bushings from various manufacturers.

TB Woods 2517 TL2517238 Taper Lock Bushing, Cast Iron, Inch, 2.375\ Bore, 1200 lbs/in Torque, Standard Design, Shallow Keyway

Taper lock bushing with a torque capacity of 1,200 in-lbs for mounting a pulley, sheave, or sprocket on a drive shaft.
Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
Cast iron for resistance to wear, galling, and corrosion.
Keyed to the shaft to prevent the shaft from rotating in the bushing.
Interchangeable with taper lock bushings from various manufacturers.

TB Woods 2012 TL201230MM Taper Lock Bushing, Cast Iron, 30 mm Bore, 1200 lbs/in Torque, Standard Design, Standard Keyway

Taper lock bushing with a torque capacity of 1,200 in-lbs for mounting a pulley, sheave, or sprocket on a drive shaft.
Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
Cast iron for resistance to wear, galling, and corrosion.
Keyed to the shaft to prevent the shaft from rotating in the bushing.
Interchangeable with taper lock bushings from various manufacturers.

TB Woods 1610 TL161025MM Taper Lock Bushing, Cast Iron, 25 mm Bore, 1200 lbs/in Torque, Standard Design, Standard Keyway

Taper lock bushing with a torque capacity of 1,200 in-lbs for mounting a pulley, sheave, or sprocket on a drive shaft.
Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
Cast iron for resistance to wear, galling, and corrosion.
Keyed to the shaft to prevent the shaft from rotating in the bushing.
Interchangeable with taper lock bushings from various manufacturers.

TB Woods 1108 TL110858 Taper Lock Bushing, Cast Iron, Inch, 0.625\ Bore, 1200 lbs/in Torque, Standard Design, Standard Keyway

Taper lock bushing with a torque capacity of 1,200 in-lbs for mounting a pulley, sheave, or sprocket on a drive shaft.
Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
Cast iron for resistance to wear, galling, and corrosion.
Keyed to the shaft to prevent the shaft from rotating in the bushing.
Interchangeable with taper lock bushings from various manufacturers.

Martin 3020 2 Taper Bushing, Sintered Steel, Inch, 2\ Bore, 4.25\ OD, 2\ Length

Taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
Sintered steel for greater strength and resistance to wear than steel.
Keyed to the shaft to prevent the shaft from rotating in the bushing.
Interchangeable with taper bushings from various manufacturers.

Martin 2517 1 1/2 Taper Bushing, Sintered Steel, Inch, 1.5\ Bore, 3.375\ OD, 1.75\ Length

Taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
Sintered steel for greater strength and resistance to wear than steel.
Keyed to the shaft to prevent the shaft from rotating in the bushing.
Interchangeable with taper bushings from various manufacturers.

Martin 1008 5/8 Taper Bushing, Sintered Steel, Inch, 0.62\ Bore, 1.386\ OD, 0.875\ Length

Taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
Sintered steel for greater strength and resistance to wear than steel.
Keyed to the shaft to prevent the shaft from rotating in the bushing.
Interchangeable with taper bushings from various manufacturers.

Martin 2517 2 7/16 Taper Bushing, Sintered Steel, Inch, 2.44\ Bore, 3.375\ OD, 1.75\ Length

Taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
Sintered steel for greater strength and resistance to wear than steel.
Keyed to the shaft to prevent the shaft from rotating in the bushing.
Interchangeable with taper bushings from various manufacturers.

Martin 2517 1 1/4 Taper Bushing, Sintered Steel, Inch, 1.25\ Bore, 3.375\ OD, 1.75\ Length

Taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
Sintered steel for greater strength and resistance to wear than steel.
Keyed to the shaft to prevent the shaft from rotating in the bushing.
Interchangeable with taper bushings from various manufacturers.

Martin 2012 1 5/8 Taper Bushing, Sintered Steel, Inch, 1.63\ Bore, 2.75\ OD, 1.25\ Length

Taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
Sintered steel for greater strength and resistance to wear than steel.
Keyed to the shaft to prevent the shaft from rotating in the bushing.
Interchangeable with taper bushings from various manufacturers.

Martin 2012 1 1/8 Taper Bushing, Sintered Steel, Inch, 1.13\ Bore, 2.75\ OD, 1.25\ Length

Taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
Sintered steel for greater strength and resistance to wear than steel.
Keyed to the shaft to prevent the shaft from rotating in the bushing.
Interchangeable with taper bushings from various manufacturers.