Best Spur Gear Distributor India

ARRMA Slipper Clutch Maintenance Set ARAC9103

ARRMA ARA311034 - HD Slipper Set, 0.8Mod, 57T.
Features: Precision manufactured aluminum slipper hubs Durable composite 57T 0.8 module spur gear for reliable power handling capability Castellated....
Includes: (1) Assembled Slipper Clutch with Composite Spur Gear.
Part number(s) included (in factory packaging): ARA311034.

50 tooth hardened steel Mod 1 (1.0 metric pitch) spur gear for the Traxxas E Revo2, X-Maxx 6S and 8S, Maxx 4S and XO-1.
Do NOT use the pin system for setting the X-Maxx gear mesh. Instead, manually set the gear mesh without the pins. Refer to the Traxxas manual for instructions (ref. pg.22 - Adjusting Gear Mesh).
With the pins removed, use the four 4x16mm button-head cap screws on the bottom to set gear mesh. Loosen the four 4x16mm button-head cap screws. Cut a narrow strip of notebook paper and run it into the gear mesh. Slide the motor and pinion gear into the spur gear. Tighten the four 4x16mm button-head cap screws, and then remove the strip of paper. You should be able to run a fresh strip of paper through the gears without binding them..

50 tooth hardened steel Mod 1 (1.0 metric pitch) spur gear for the Traxxas E Revo2, X-Maxx 6S and 8S, Maxx 4S and XO-1.
Do NOT use the pin system for setting the X-Maxx gear mesh. Instead, manually set the gear mesh without the pins. Refer to the Traxxas manual for instructions (ref. pg.22 - Adjusting Gear Mesh).
With the pins removed, use the four 4x16mm button-head cap screws on the bottom to set gear mesh. Loosen the four 4x16mm button-head cap screws. Cut a narrow strip of notebook paper and run it into the gear mesh. Slide the motor and pinion gear into the spur gear. Tighten the four 4x16mm button-head cap screws, and then remove the strip of paper. You should be able to run a fresh strip of paper through the gears without binding them..

Brand New Holley Sniper EFI HyperSpark Distributor, Compatible with Chevy Small Block & Big Block (Part #565-300).
Features: Hall Effect crank trigger sensor housing provides a noise-free RPM signal to the Sniper ECU | Billet distributor housing provides corrosion resistance and stylish looks! | Patented Clear Installation cap eliminates any confusion while installing the distributor | Easiest plug and play way to add timing control to a Sniper EFI Installation | Distributor shutter wheel is pinned and welded to the shaft, for decades of reliable accuracy | Includes Wire Retainer for a clean installation |.
Comes with Cast Gear Installed - contact camshaft manufacturer for recommended gear material | Designed to be used with Sniper EFI HyperSpark CD box P/N 556-151 and Ignition Coil 556-152.
Specs: Brand: Holley Sniper EFI | Emission Code: 3 | Material: Shiny Billet Aluminum | Product Type: Distributor.
HyperSpark distributors are plug and play with all Holley Sniper EFI systems, featuring a high-quality billet distributor housing, hall effect crank trigger sensor, and they com....

Gentle on your horse (especially if you're new to riding with spurs) but effective when used correctly - and no spur marks! They also look great with a black boot and fit nicely..
If you love your horse you will love these spurs. Very gentle....
Fantastic quality and workmanship. Worth every penny..

HyperSpark Ignition, from Sniper EFI. Ready to plug and play with your Sniper EFI System.
The complete system consists of an ignition coil, CD ignition box, billet distributor with hall effect crank signal sensor, and complete wiring harness ready to plug and play with your Sniper EFI System.
The HyperSpark ignition coil comes self-contained in it’s own mounting bracket, with mounting hardware provided.
Comes with Cast Gear Installed – contact camshaft manufacturer for recommended gear material.
Distributor shutter wheel is pinned and welded to the shaft, for decades of reliable accuracy.

【Complete HEI Distributor】--Complete HEI Distributor 65K Coil 7500 RPM - One Wire Installation, Blue cap.
【Vehicle Fitment】--Compatible with Small Block Ford SBF 5.8 L 351W Windsor 8 Cylinder.
【High Performance】--Coil Spark of 7,500 RPM - With high voltage of up to 65,000.
【OE+ Durability】--Manufactured by certified OE distributor manufacturer and Heavy Duty- With high grade hardened steel gears, utilizing the 4-pin ignitionOE+ Durability - Manufactured by certified OE distributor manufacturer and Heavy Duty- With high grade hardened steel gears, utilizing the 4-pin ignition.
【CNC Machined】--Polished Aluminum shaft and a chrome-moly gear.

Brand New MSD Crate Ignition Kit, Compatible with Ford 351W Engines, Produced by Holley Performance Products (Part #84746).
Includes: Built-in Rev Limiter | Ready-to-Run Distributor | Blaster SS Coil | 8.5mm Spark Plug Wires with separators | Billet hold-down clamp.
Specs: Brand: MSD | Color: Red | Distributor Type: Ready To Run | Emission Code: 3 | Engine: Ford 351W | Gear: Steel | Product Type: Distributor.
These kits are supplied with everything you need for your ignition. The Ready-to-Run distributor is a great choice for your engine. They feature a high output module that produces a vigorous jolt across the plug gap and the installation is simple with just three wires to connect!.
The Blaster SS Coil is a compact and efficient coil that is easy to mount and the system is complemented with MSD's red 8.5mm Super Conductor wires. The wires are supplied as a universal fit, with our straight/multi-angle boots and terminals on the spark plug side and after you route them and cut to length, you simply install the distributor side terminal and boot. Our Pro-Clamp separators keep ....