Best Spur Gear Motors

ARRMA Slipper Clutch Maintenance Set ARAC9103

• ARRMA ARA311034 - HD Slipper Set, 0.8Mod, 57T.
• Features: Precision manufactured aluminum slipper hubs Durable composite 57T 0.8 module spur gear for reliable power handling capability Castellated....
• Includes: (1) Assembled Slipper Clutch with Composite Spur Gear.
• Part number(s) included (in factory packaging): ARA311034.

DAPENGNIAO for Das87 6 Pcs M0.2 Brass 10T-50T Spur Gear Accessories

• 50 tooth hardened steel Mod 1 (1.0 metric pitch) spur gear for the Traxxas E Revo2, X-Maxx 6S and 8S, Maxx 4S and XO-1.
• Do NOT use the pin system for setting the X-Maxx gear mesh. Instead, manually set the gear mesh without the pins. Refer to the Traxxas manual for instructions (ref. pg.22 - Adjusting Gear Mesh).
• With the pins removed, use the four 4x16mm button-head cap screws on the bottom to set gear mesh. Loosen the four 4x16mm button-head cap screws. Cut a narrow strip of notebook paper and run it into the gear mesh. Slide the motor and pinion gear into the spur gear. Tighten the four 4x16mm button-head cap screws, and then remove the strip of paper. You should be able to run a fresh strip of paper through the gears without binding them..

TE CONNECTIVITY / POTTER & BRUMFIELD T92P7D22-12 POWER RELAY, 12VDC, 30A, DPST-NO, FLANGE

• Electromagnetic relays are widely used: household air conditioner compressor motors, fan motors, cooling pump motors, starter relays for car starters, spur relays, motors, generator circuit breakers, industrial relays, etc.
• Product Name: Electromagnetic Power Relay.
• Red mechanical indicatoe:It can intuitively judge whether the relay is attracted.
• LED signal lamp : It can judge the AC or DC coil, and judge whether the coil is energized.

Boston Gear L5092 Rack Gear, 14.5 Degree Pressure Angle, 20 Pitch, 2.0 feet long, Steel

• 50 tooth hardened steel Mod 1 (1.0 metric pitch) spur gear for the Traxxas E Revo2, X-Maxx 6S and 8S, Maxx 4S and XO-1.
• Do NOT use the pin system for setting the X-Maxx gear mesh. Instead, manually set the gear mesh without the pins. Refer to the Traxxas manual for instructions (ref. pg.22 - Adjusting Gear Mesh).
• With the pins removed, use the four 4x16mm button-head cap screws on the bottom to set gear mesh. Loosen the four 4x16mm button-head cap screws. Cut a narrow strip of notebook paper and run it into the gear mesh. Slide the motor and pinion gear into the spur gear. Tighten the four 4x16mm button-head cap screws, and then remove the strip of paper. You should be able to run a fresh strip of paper through the gears without binding them..

Electromagnetic Power Relay, 8-Pin 10 AMP 24V AC Relay Coil with Socket Base, LED Indicator, DPDT 2NO 2NC - LY2NJ [Applicable for DIN Rail System]

• Electromagnetic relays are widely used: household air conditioner compressor motors, fan motors, cooling pump motors, starter relays for car starters, spur relays, motors, generator circuit breakers, industrial relays, etc.
• Product Name: Electromagnetic Power Relay.
• Red mechanical indicatoe:It can intuitively judge whether the relay is attracted.
• LED signal lamp : It can judge the AC or DC coil, and judge whether the coil is energized.

RAB Lighting HAZXLED26FF-G Outdoor, Gray

• A gear motor is a specific type of electrical motor that is designed to produce high torque..
• Gear motors are primarily used to reduce speed in a series of gears, which in turn creates more torque..
• Full metal gears would ensure a longer service life, high torque and less noise..
• There are eight reduction gear motors of different speed and you can choose the one you need..
• Gear motors can be found in many different applications, and are probably used in many devices in your home..

Zerodis Spur Strap, 1 Pair Handmade Leather Equestrian Spur Strap Cowboy Outfit Boots(Black)

• Gentle on your horse (especially if you're new to riding with spurs) but effective when used correctly - and no spur marks! They also look great with a black boot and fit nicely..
• If you love your horse you will love these spurs. Very gentle....
• Fantastic quality and workmanship. Worth every penny..

DC 12V Speed Reduction Gear Motor Electric High Torque Gearbox Motor Micro Multiple Models Reducer Replacement Motor (30RPM)

• 【Widely Used】Gear motors can be found in many different applications, and are probably used in smart toy car, robot, printer,etc.
• 【Multiple Speed Options】There are five reduction gear motors of different speed and you can choose the one you need,Speed: 3.5RPM, 15RPM, 30RPM, 70RPM.
• 【High Torque】 Gear motors are primarily used to reduce speed in a series of gears, which in turn creates more torque.
• 【Full Metal Gears】The metal gear in the gear box has a strong carrying capacity, high temperature resistance, wear resistance, ruggedness and other characteristics effectively protect the main body of the worm gearbox motor.
• 【Specifications】Voltage: 12V DC--RPM: 3.5RPM/15RPM/30RPM/70RPM--Diameter: 37mm--Gearbox reduction ratio: 1:30 --- 1: 360--Starting voltage is 3.5V.

Mxfans 30 T Brass Gear Wheel & 4MM Hole Dia Shaft Set 0.5 Mold 1:30

KXA 9Pcs/Set CJ0618 Household Small Lathe, Micro Lathe Gear, Metal Exchange Gear

TAMIYA America, Inc 1/10 Frog 2WD Buggy Kit, TAM58354

• Changeable pinion/spur gears-allows gear ratio changes-3 of each included.
• Straight ribbed racing front tires and high-grip rears.

ACDelco GM Original Equipment 23271566 Hydraulic Rack and Pinion Steering Gear Assembly with Inner Tie Rods

Hobbypark 11184 Steel Diff Differential Main Metal Spur Gear 64T &11119 Motor Gear 17T RC Replacement Parts for Redcat HSP 1/10 Monster Truck

• Produced by HobbyPark,Compatibile with: Redcat Lightning EP Drift, Lightning EPX PRO, Sandstorm, Sandstorm TK, Tornado Epx/epx PRO, Tsunami EPX, Volcano Epx/epx PRO, Vortex Epx/epx PRO 1/10 Scale Truck HSP.
• 1x Diff Main Gear (64T) Diameter of The Hole:5mm.
• 1xMotor Gear (17T) Diameter of The Hole:3.17-3.18mm.
• 1 xGrub Head Screw (As shown in the picture).
• please attention, because of the motor gear and this spur gear are metal, suggest to add lubricating oil, not only to reduce the friction between the metal gear, but also the sound will be a little bit small.