Best Spur Gear Racks

ARRMA Slipper Clutch Maintenance Set ARAC9103

• ARRMA ARA311034 - HD Slipper Set, 0.8Mod, 57T.
• Features: Precision manufactured aluminum slipper hubs Durable composite 57T 0.8 module spur gear for reliable power handling capability Castellated....
• Includes: (1) Assembled Slipper Clutch with Composite Spur Gear.
• Part number(s) included (in factory packaging): ARA311034.

DAPENGNIAO for Das87 6 Pcs M0.2 Brass 10T-50T Spur Gear Accessories

• 50 tooth hardened steel Mod 1 (1.0 metric pitch) spur gear for the Traxxas E Revo2, X-Maxx 6S and 8S, Maxx 4S and XO-1.
• Do NOT use the pin system for setting the X-Maxx gear mesh. Instead, manually set the gear mesh without the pins. Refer to the Traxxas manual for instructions (ref. pg.22 - Adjusting Gear Mesh).
• With the pins removed, use the four 4x16mm button-head cap screws on the bottom to set gear mesh. Loosen the four 4x16mm button-head cap screws. Cut a narrow strip of notebook paper and run it into the gear mesh. Slide the motor and pinion gear into the spur gear. Tighten the four 4x16mm button-head cap screws, and then remove the strip of paper. You should be able to run a fresh strip of paper through the gears without binding them..

Boston Gear L5092 Rack Gear, 14.5 Degree Pressure Angle, 20 Pitch, 2.0 feet long, Steel

• 50 tooth hardened steel Mod 1 (1.0 metric pitch) spur gear for the Traxxas E Revo2, X-Maxx 6S and 8S, Maxx 4S and XO-1.
• Do NOT use the pin system for setting the X-Maxx gear mesh. Instead, manually set the gear mesh without the pins. Refer to the Traxxas manual for instructions (ref. pg.22 - Adjusting Gear Mesh).
• With the pins removed, use the four 4x16mm button-head cap screws on the bottom to set gear mesh. Loosen the four 4x16mm button-head cap screws. Cut a narrow strip of notebook paper and run it into the gear mesh. Slide the motor and pinion gear into the spur gear. Tighten the four 4x16mm button-head cap screws, and then remove the strip of paper. You should be able to run a fresh strip of paper through the gears without binding them..

ALEKO Remote Control for Gate Opener Remote Transmitter (2LM124GA)

• Our steel gear racks are compatible with any ALEKO brand AR series rack driven gate openers.
• Made for ALEKO brand gate openers, but compatible with most other rack driven openers.
• Steel gear racks last longer than nylon racks.
• Includes (4) 3.3 foot long gear racks for a total of 13 feet, and all needed fixings.

ALEKO PCBAC1400 Circuit Control Board For Gate Openers AC1400 AC2000 AR1450 AR2050

• Our nylon gear racks are compatible with any ALEKO brand AR series rack driven gate openers.
• Made for ALEKO brand gate openers, but compatible with most other rack driven openers.
• Made of fiberglass reinforced nylon surrounding a steel tube.
• Nylon gear racks operate more quietly than steel racks, and are rustproof.
• Includes (4) 3.3 foot long gear racks for a total of 13 feet, and all needed fixings.

Zerodis Spur Strap, 1 Pair Handmade Leather Equestrian Spur Strap Cowboy Outfit Boots(Black)

• Gentle on your horse (especially if you're new to riding with spurs) but effective when used correctly - and no spur marks! They also look great with a black boot and fit nicely..
• If you love your horse you will love these spurs. Very gentle....
• Fantastic quality and workmanship. Worth every penny..

Mxfans 30 T Brass Gear Wheel & 4MM Hole Dia Shaft Set 0.5 Mold 1:30

KXA 9Pcs/Set CJ0618 Household Small Lathe, Micro Lathe Gear, Metal Exchange Gear

TAMIYA America, Inc 1/10 Frog 2WD Buggy Kit, TAM58354

• Changeable pinion/spur gears-allows gear ratio changes-3 of each included.
• Straight ribbed racing front tires and high-grip rears.

ACDelco GM Original Equipment 23271566 Hydraulic Rack and Pinion Steering Gear Assembly with Inner Tie Rods

Grassracks Bamboo Snowboard Rack and Skateboard Rack - Moloka`i Series (Bamboo - 1 Board)

• ...System takes minutes to install and is the strongest mounting system on the market. Our Mounting Bar & Cradle Hook System keeps cradles secure but also easily adjustable along Mounting Bars to accommodate different width needs for bindings, skateboard trucks, etc. (a feature not found elsewhere on the market). Racks easily hold up to 80 lbs. (Hardware supplied for installation into drywall.).
• STYLISH & ECO-FRIENDLY - We make the best-looking racks ON & FOR the planet from eco-friendly Bamboo and Birch materials. Our bamboo has a rich color and beautiful grain that shows off thousands of bamboo fibers on the face and cut edge. Our bamboo is finished with a robust, eco-friendly coating to protect from moisture and sunlight. We also offer a subtle grain, light color Birch material. Birch is left unfinished so you can paint or stain to match home decor, if needed..
• EXTRA FEATURES - UTILITY HOOKS & PADDING - Low profile UTILITY HOOKS found on the bottom of each cradle are perfect for organizing extra gear like bags, jackets, helmets, poles, and more. HIGH-DENSITY PADDING is provided for each cradle arm to keep snowboards & other gear safe from scratches and dings. Small padding is also provided for points where cradles contact the wall..

Hobbypark 11184 Steel Diff Differential Main Metal Spur Gear 64T &11119 Motor Gear 17T RC Replacement Parts for Redcat HSP 1/10 Monster Truck

• Produced by HobbyPark,Compatibile with: Redcat Lightning EP Drift, Lightning EPX PRO, Sandstorm, Sandstorm TK, Tornado Epx/epx PRO, Tsunami EPX, Volcano Epx/epx PRO, Vortex Epx/epx PRO 1/10 Scale Truck HSP.
• 1x Diff Main Gear (64T) Diameter of The Hole:5mm.
• 1xMotor Gear (17T) Diameter of The Hole:3.17-3.18mm.
• 1 xGrub Head Screw (As shown in the picture).
• please attention, because of the motor gear and this spur gear are metal, suggest to add lubricating oil, not only to reduce the friction between the metal gear, but also the sound will be a little bit small.

Team Associated 20155 MT28 Monster Truck Ready to Run 1/28 Scale 2WD with Battery Charger & 2.4Ghz Transmitter

• Product Name : Steel #45 Spur Gear 56T & Double Speed Reduction Gears - 2Pcs Set.
• Made by high quality hardened STEEL #45 to replace the original stock gear for more strength and increase durability..
• Will fit : Thunder Tiger 1/14 Crawler KAISER XS 6602-F.