Categories

Best Square Pipe

Milton Friedman Premium T-Shirt

  • Air flow of 40 standard cubic feet per minute.
  • Maximum temperature of 250 degrees Fahrenheit.
Check Stock

Toledo Pipe KIT HC 3092 Pipe Hole Cutter Chain Vise and Milwaukee 1660-6 1/2" Compact Drill 450 RPM

  • The Toledo Pipe HC 3092 Easily attaches to various sizes of pipe and conduit..
  • Making it effortless to drill up to a 4 1/2" hole into the side of pipe or conduit without slipping..
  • Clamping the drill to the pipe also guarantees perfectly square, centered holes..
  • Comes with Milwaukee 1660-6 1/2" compact drill..
  • Max Drill Capacity: 4 1/2", Min Pipe Size: 1 1/4", Max Pipe Size: 12", Chain Length: 36".
Check Stock

DEKTITE #9 (DFE109B) Square Black EPDM Flexible Pipe Flashing, Roof Jack, Pipe Boot Flashing (for OD Pipe Sizes 9\ - 20\)

  • Dektite Base Seals Against Uneven Metal Roofing with Ease. Pipe Flashing Will Not Break or Crack..
  • This Pipe Flashing Boot Made By Deks is Made of EPDM for Long Life Even at Extreme Temperatures.
  • Black Dektite Pipe Flashing is Rated for Continuous Service Temperature Ranges of -58˚F to +239˚ F.
  • Black (EPDM) Boot with Flexible Base (Aluminum Collar). Pipe Boot Fits 9” to 20” Pipe OD..
  • Black (EPDM) Dektite SQUARE Standard Flexible Pipe Boot Flashing. Base is 26-3/4" X 26-3/4".
Check Stock

2 Inch Square Plastic Plug, End Caps for Tubing Pipe OD 2\ x 2\ (not ID), Steel Chair Leg End Caps, Bar Stool Glides Inserts, Fence Plugs, Furniture or Fitness Equipment End Caps (12 Packs)

  • [How to Choose] – The 2" Square Plastic Plugs ONLY fit 2-Inch (2.0") OUTSIDE DIAMETER (not inside diameter) SQUARE TUBING or PIPE. Not fit for 2" inside diameter tubing or Pipe, and Not fit for round shape pipe or tubing either..
  • [SIZE] - The Square Plastic Plugs fit 2" (two inch) OD square tubing (2x2) with INSIDE hole diameters (ID) from 1 3/4" to 1 15/16" ( 1.75" to 1.93") and wall thickness of 0.040" - 0.123" (10-20 Gauge).
  • [FUNCTIONS] - Reduce noise, prevents scratching of your floor surface and protects your expensive furniture when furniture is moved. These tube plugs are also nice dress up for the ends of the gorilla lift square tubes, fitness equipment end caps, fencing post end caps, furniture gliding caps, and prevent the rain to come in and rust out the pipes..
  • [APPLICATION] - These high-grade black ribbed plugs work great for preventing scuffs on wood floor or as protection glides on patio chair end caps, bench feet, table legs, bar stool glides inserts, chair leg protectors, patio furniture inserts, bar stool glides inserts, chair end caps, chair leg inserts, pool fence plugs and much more. They are also designed to hold up against impact abuse, and harsh weather conditions..
  • [PREMIUM QUALITY] - Made by high Grade heavy duty black polyeth....
Check Stock

Olympia Tools Ratcheting Pipe Cutter, 39-910

  • PIPE CUTTER: This ratcheting pipe cutter features a precision-ground, heat-treated blade, durable cast-aluminum handles and safety lock. Removable square pipe anvil pad included..
  • HIGH QUALITY: This durable and long-lasting pipe cutter is an essential tool for producing clean cuts. Use for faster, cleaner and more convenient plastic and metal pipe cutting..
  • MADE TO LAST: Our durable and long-lasting tools help you with home, garage & industrial projects. With professional-grade quality, easily repair & fix issues with our tool cabinet essentials..
  • THE RIGHT TOOL FOR THE JOB: We engineer a range of bolt cutters, clamps, chisels, folding carts, hammers, pliers, saws, screwdrivers, tape measures, utility knives, vises, bolt cutters, saws & wrenches..
  • SUPERIOR INSTRUMENTS: Olympia Tools provides quality & innovative hand & specialty tools, tool accessories & outdoor equipment for construction, woodworking, mechanical maintenance & home repair..
Check Stock

AMERIMAX HOME PRODUCTS 2526519 2 in x 3 in B or Side Elbow Brown Aluminum, Two-by-Three

  • Connects 3 in. S&D pipe to 3 in. S&D pipe, & to NDS parts that fit 3 in. S&D connections such as Spee-D, 3, 5, & 8 in. Pro Series Channel Drain Outlets, 6 in. Low-Profile Adapters, 4 & 6 in. Square Grates, 3 & 4 in. Round & Atrium Grates, Pop-Up Emitters.
  • Adds a 90° turn from 3 in. Sewer & Drain (S&D) pipe to 3 in. S&D pipe in non-pressurized drainage and sewer piping systems.
  • Adds a 90° turn from select drainage products such as channel drain outlets, drainage grates, and pop-up emitters to 3 in. S&D pipe.
  • Attach 3 in. S&D pipe to one end of 90° elbow and 3 in. S&D pipe to the other end.
  • also connects 3 in. S&D pipe to select drainage products that accommodate 3 in. S&D connections.
  • solvent weld to PVC components for a watertight connection.
  • Comes with one PVC Elbow. Meets applicable ASTM standards..
Check Stock

General Tools Hose and Tubing Cutter #115 - Cuts up to 2 Inch Flexible Rubber, PVC, ABS and Polyethylene Tubing

  • CUTS RUBBER TUBING: Cuts up to 2-inch rubber hose or tube..
  • CUT PE OR ABS PIPE: Cuts up to 1-1/2 inch PE and ABS pipe..
  • CUTS PVC PIPE: Cuts up to 1-1/4 inch PVC pipe..
  • HOLDS TIGHT: The curved holder supports the hose or tubing during square cuts..
  • LONG HANDLES: Long handles for added leverage..
Check Stock

NPT Thread Forming Taps - 5 Pieces 1/8 1/4 3/8 1/2 3/4 Pipe Taps Set with Storage Box Drill Bits for Cleaning or Re-thread Damaged or Jam Pipe Threads High-speed Steel Material

  • ...hreads of water pipe joints. They are available in National Pipe Taper (NPT) and British Standard Pipe Taper (BSP) and come in the following sizes: 1/8" - 27 npt, 1/4" - 18 npt, 3/8" - 18 npt, 1/2" - 14 npt, and 3/4" - 14 npt..
  • Nominal size of the tap is that of the pipe fitting being tapped. Our pipe taps feature a square universal chuck that can be used with either a manual wire twister or a tap machine, making them convenient and fast to use. The round shank with square end and straight flute tools allow chips to collect in the flutes as they cut, making them well-suited for most applications in shallow cuts..
  • The thread is standard, clear, and the cutting resistance is smaller than that of ordinary taps, which is the best choice for through-hole processing. Standard tooth spacing, no bad teeth, no burrs, making repair and maintenance a breeze. Slotted in the front section, chip removal in the upper phase, easy to repair, through holes and blind holes are available..
  • Product Packaging Upgrade: The set comes with a convenient red storage box to keep the taps organized and easily accessible. The box also helps protect the taps from damage during transportation and storage. These thread forming taps are perfect for plumbers, mechanics, or anyone who wor....
Check Stock

Drill America - POUCSNPT5 5 Piece NPT Pipe Tap Set (1/8\

  • Carbon steel Pipe taps are designed to clean and or re-thread damaged or Jam Pipe threads.
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
  • Round Shank with square end. Straight flute tools allow chips to collect in the Flutes as they cut and are well suited for most applications in shallow cuts.
  • Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction.
  • NPT Pipe taps, sizes 1/4"-18 NPT, 3/8"-18 NPT, 1/2"-14 NPT, 3/4"-14 NPT carbon steel Pipe taps in plastic pouch case.
Check Stock

#5 (4\ - 8\) DEKTITE RED Square Base High Temp Silicone - Flexible Pipe Flashing Boot - Dektite Pipe Flashing (DFE205RE)

  • Flashing Base is 12-1/4" by 12-1/4" - Pipe Boot Fits 4" x 8" Outside Pipe Diameter.
  • Continuous Service High Temperature Ranges of -58F to 392F (Silicone).
  • If Trimmed and Installed Correctly, Pipe Flashing Will Not Break or Crack.
  • Use for Stove Pipes, Chimneys, Plumbing, Heating, Air Conditioning, Electrical, and Exhaust Vents.
  • On a Roof with a 10/12 to 12/12 Pitch Dektite Recommends You Use a Square Base Pipe Flashing Installed With The Base Tip Pointed Towards Roof Top.
Check Stock

HORUSDY 5-Piece NPT Pipe Tap Set, Sizes Includes 1/8\

  • Carbon steel pipe taps are designed to clean and/or rethread to damage or block pipe threads..
  • Right-hand cutting tool has a clockwise cutting function..
  • NPT Pipe taps sizes includes:1/4"-18 NPT, 3/8"-18 NPT, 1/2"-14 NPT, 3/4"-14. Equipped with special storage box..
  • Round shank, square end. Straight flute tools allow chips to collect in the Flutes as they cut and are well suited for most applications in shallow cuts..
Check Stock

PVC Pipe Cutter, Cuts up to 2-1/2\

  • 【Wide cutting range】： Pvc pipe cutter tool with the ratchet drive The tube cutter is commonly used for cutting most kinds of plastic (PVC, CPVC, PPR, PEX, PE, Rubber hose, etc.), The maximum opening is 63mm, After many tests, the cutting capacity up to 2-1/2-inch (63mm) outside diameter--Can not make a square cut..
  • 【Wide range of applications】：The JHWLKJ Pvc pipe cutter Widely used in life, This is quite convenient for your work and life. I think it is an essential cutting tool for home spare parts, plumbers, electricians and vehicle mechanics..
  • 【Durability】：Made with SK5 Teflon Blade, good toughness, strength. Durable aluminum alloy handles are made to last for long time use.The triangle design at the edge of the knife allows better access to the pipe.Straight Cuts - Blade does not bend or break.You can use it to cut the pipe more smoothly..
  • 【Comfortable operation】：The professional tube cutter adopts ratchet drive technology to greatly save your strength to smoothly complete the cutting operation with one hand, which makes cutting more labor-saving and improves work efficiency. It also ensures automatic locking during the cutting process to protect the user from the rebound of the blade..
  • 【Easy to operate】：The pipe cutter i....
Check Stock

MILTON 158 Blo-Gun 2' Ext. w/Safety & Rubber Tip

  • Maximum working pressure of 150 pounds per square inch.
  • Safety nozzle offers 10.5 standard cubic feet per minute at 100 pounds per square inch.
  • Rubber tip offers 11.6 standard cubic feet per minute at 100 pounds per square inch.
Check Stock