Categories

Best Square Steel Forged Bar

4PCS Blacksmith Anvil Hardy Tool Set 1 inch - Creasing Stake Tool, Hot Cut Tool, Bottom Fuller &Turning Bending Scrolling Fork

  • 【APPLICATION】-- This Blacksmith Anvil Forge Hardy Tool Set fits in a 1 inch Hardy hole in a anvil or can be used in a vise.Square shanks fit the square hole in the anvil and prevent rotation..
  • 【Turning Bending Scrolling Fork】This is a really handy tool for making S hooks or other basic turning/scrolling shapes. This tool allows you to get leverage for bending metal by hand, with a hammer, or with a bending wrench..
  • 【Bottom Fuller Tool】Bottom fuller hardy tools are used in the anvil or clamped in a vise to form metal. Use a hammer to work from the top, while the hardy tool works from the bottom. This gives you different anvil surfaces and edges to work with..
  • 【Creasing Stake Tool】Two piece of bar stock weld it together on a stand. This is used for doing creases in metal. You can put the metal on the tool and use a chisel to drop the metal down into the slot..
  • 【Hot Cut Tool】This plate stands straight up with a Hand Forged, hardened and Sharpened edge along the top. To place orange/red hot steel over edge and strike with hammer. Cuts through hot steel pretty quick..
Check Stock

Proforged 113-10263 Rear Sway Bar End Link

  • ... sway bar end links with confidence knowing that every part we sell is backed by our industry-leading 1,000,000 mile limited warranty. We can offer this because our parts are engineered, tested, re-tested, and subject to strict quality control procedures - our quality is second to none..
  • PRECISION FIT AND FINISH. Proforged sway bar end links are built using some of the toughest steel on the planet. Bolt-and-sleeve type links are built with high quality hardware, and tie rod style links feature forged SAE4140 chromoly steel studs and forged SAE1045 housings. Every fit surface is CNC machined for precision fit and finish. Tie rod style units are sealed with specially-designed CR-rubber boots for ultimate durability..
  • BUILT FOR PROFESSIONALS. There’s a reason why the most well-respected performance suspension brands use Proforged products - we’re fanatical about quality, performance, and durability. Professionals save time and money with our competitively-priced products that outlast inferior brands. Do the job with confidence - replace your worn components with the leader in performance chassis parts: Proforged..
  • WHAT IS A SWAY BAR END LINK? A sway bar end link (also known as a stabilizer bar link) is part of your vehicle’s suspension system - it co....
Check Stock

Proforged 113-10342 Front Left Sway Bar End Link

  • ... sway bar end links with confidence knowing that every part we sell is backed by our industry-leading 1,000,000 mile limited warranty. We can offer this because our parts are engineered, tested, re-tested, and subject to strict quality control procedures - our quality is second to none..
  • PRECISION FIT AND FINISH. Proforged sway bar end links are built using some of the toughest steel on the planet. Bolt-and-sleeve type links are built with high quality hardware, and tie rod style links feature forged SAE4140 chromoly steel studs and forged SAE1045 housings. Every fit surface is CNC machined for precision fit and finish. Tie rod style units are sealed with specially-designed CR-rubber boots for ultimate durability..
  • BUILT FOR PROFESSIONALS. There’s a reason why the most well-respected performance suspension brands use Proforged products - we’re fanatical about quality, performance, and durability. Professionals save time and money with our competitively-priced products that outlast inferior brands. Do the job with confidence - replace your worn components with the leader in performance chassis parts: Proforged..
  • WHAT IS A SWAY BAR END LINK? A sway bar end link (also known as a stabilizer bar link) is part of your vehicle’s suspension system - it co....
Check Stock

Starrett C33HC-12-4R Combination Square 12 4R Grads

  • With reversible lock bolt, scriber, spirit level.
  • Graduation: No. 4R - 1/8", 1/16", quick reading, 1/32", 1/64".
  • The square heads are forged hardened steel with smooth black enamel finish.
  • Square blade easy-to-read, sharp graduation.
  • Square head and center head bearing surface are accurately ground.
Check Stock

Cobra Golf 2019 F-Max Superlite 5 Hybrid Black-Red (Men's, Right Hand, Graphite, Right Flex, 25.0)

  • Lighter overall weight-19 grams of weight saving performance is achieved through a 7 gram lighter clubhead, a 7 gram lighter grip, and a 5 gram lighter shaft.
  • Forged 455 steel face INSERT-A shallow face design is forged using high strength stainless steel to create higher dynamic launch and faster ball speeds.
  • Back/heel weighting-an ultra-forgiving construction features an internal weight pad positioned low, back and heel ward that promotes higher launch and straighter ball flights.
  • Crown alignment feature-a subtle crown alignment design assists with a square setup at address and provides a visually pleasing detail with it being distracting to the Eye.
  • Offset design-an Offset hosel helps deliver a square face at impact to optimize launch and distance, while promoting straighter, more accurate ball flights.
Check Stock

Cobra Golf 2019 F-Max Superlite Fairway 3 Wood Black-Red (Mens, Left Hand, Graphite, Reg Flex, 16.0)

  • Lighter overall weight-16 grams of weight saving performance is achieved through a 4 gram lighter clubhead, a 7 gram lighter grip, and a 5 gram lighter shaft.
  • Forged 455 steel face INSERT-A shallow face design is forged using high strength stainless steel to create higher dynamic launch and faster ball speeds.
  • Back/heel weighting-an ultra-forgiving construction features an internal weight pad positioned low, back and heel ward that promotes higher launch and straighter ball flights.
  • Crown alignment feature-a subtle crown alignment design assists with a square setup at address and provides a visually pleasing detail with it being distracting to the Eye.
  • Offset design-an Offset hosel helps deliver a square face at impact to optimize launch and distance, while promoting straighter, more accurate ball flights.
Check Stock

ColouredPeas Square Cone Mountain Crankset - 6/7/8 Speed 42T 34T 24T Universal Crank Set for Mountain Bikes, 170mm Crank Arm

  • Suitable for 5/6/7/8 speed mountain bike, riveted disc, square hole material 6061 aluminum alloy forged T6 treatment..
  • Crank: Forged, ED (Material: Iron Disc Aluminum Crank), Support: Plastic Guard..
  • Burly and lightweight forged crankset for ultimate strength and reliability..
  • Crank length: 170mm.Forged Alloy crankarms w/solid carbon. steel chainring.
  • Please measure the size to confirm it fit your bike before you order..
  • If you have after-sales problems about our products, please contact us, we will try our best to help..
Check Stock

Emeril Lagasse 9-Piece Forged Cutlery Knife Block Set - Emeril Lagasse Cutlery Set - Perfect Kitchen Knives for Produce, Meat, and Bread

  • Forged vs Stamped – A forged knife is made out of a single bar of steel that is hammered into shape by an expert craftsman. On the other hand a stamped knife is cut out from a sheet of steel and heated by a machine. While stamped knives are the cheaper option, they cannot compare to the quality and efficiency of forged knives..
  • Chef’s Professional Quality Kitchen Knives – This Emeril Lagasse knife set is made with superior stainless steel for a super sharp cutting edge. Cut effortlessly through tough fruit, thick meats, and dense vegetables. Having a well-equipped kitchen will make cooking more enjoyable and efficient..
  • Durable & Safe 9-Piece Set – Comes with 8″ Chef Knife, 8″ Serrated Bread Knife, 7″ Santoku Knife with Cullens, 7.75″ Slicer Knife, 5.5″ Prep Knife, 5″ Utility Knife, 3.5″ Paring Knife, Kitchen Scissors, & Round Rubberwood Block..
  • Quality is King – Forged knives are made with time and care and it shows in their outstanding quality. Forged knives are more comfortable, more efficient, and overall higher quality than stamped knives. Additionally, forged knives have higher blade retention than stamped knives so you can keep your knives sharp longer..
  • Easy Hand Wash – As with most high-end, sharp silverware, do no....
Check Stock

Bessey Bar Clamp Set, F-Style Sliding Arm

  • Price For: Each Item: Bar Clamp Set Swivel Type: Replaceable Application: Heavy Duty, Maintenance, Welding, Assembly, Construction and General Purpose Clamping Handle Material: Forged Steel Type: F-Style Sliding Arm Bar Material: Cold Drawn, Heat Treated, Tempered Alloy Steel Includes: (2) Mfr. No. GS12-8K, (2) Mfr. No. GS20K, (2) Mfr. No. GS30K Pad Type: Standard.
  • Country of Origin (subject to change): Germany.
Check Stock

ION TOOL Pry Bar 4 Piece Set, 8-24 inch with Hammer Top

  • 4 Piece Pry Bar Set, comes in the following sizes: 24”, 19”, 13”, 8”..
  • Quality Construction from forged square stock, will not easily bend or twist..
  • Striking Cap designed for hammer striking to power through your project..
  • Premium non-slip handles with attractive two-tone color design..
  • Customer satisfaction guaranteed. US based company with fast and exceptional customer service..
Check Stock

Landmann USA 97306 1/2

  • Landmann USA Fireplace grates are made of solid square bar steel. This fireplace grate includes an ember retainer which keeps the wood embers in place longer for a hotter, more efficient fire..
  • 6 BarsDescriptionLandmann USA Fireplace grates are made of solid square bar steel and made in the USA. This fireplace grate includes an ember retainer which keeps the wood embers in place longer for a hotter, more efficient fire..
Check Stock

Capri Tools 6 mm M6 Stubby XZN Triple Square Bit Socket, 1/4-Inch Drive (CP30353)

  • These XZN triple square bits are a must have for working with BMW, Mercedes, VW, Audi, Porsche and most other European vehicles.
  • Stubby bits, up to 20% shorter than standard length bits, are perfect for tight spots.
  • Premium S2 steel forged bits are exceptionally strong and durable. These S2 steel bits withstand high torque and do not twist, protecting both the bit and the fastener. Premium Chrome Vanadium steel sockets plated with our SmartKrome protective plating are durable and corrosion resistant.
  • Our proprietary advanced heat treatment process further enhanced the S2 and Chrome Vanadium steel alloy to achieve the optimal balance of strength and performance. All bits have chamfered end to ensure a smooth fit onto fasteners.
  • 1/4 in. Drive M6 (6 mm) stubby XZN triple square bit.
Check Stock

Capri Tools 14 mm MT14 Stubby XZN Triple Square Bit Socket, 1/2-Inch Drive (CP30358)

  • These XZN triple square bits are a must have for working with BMW, Mercedes, VW, Audi, Porsche and most other European vehicles.
  • Stubby bits, up to 20% shorter than standard length bits, are perfect for tight spots.
  • Premium S2 steel forged bits are exceptionally strong and durable. These S2 steel bits withstand high torque and do not twist, protecting both the bit and the fastener. Premium Chrome Vanadium steel sockets plated with our SmartKrome protective plating are durable and corrosion resistant.
  • Our proprietary advanced heat treatment process further enhanced the S2 and Chrome Vanadium steel alloy to achieve the optimal balance of strength and performance. All bits have chamfered end to ensure a smooth fit onto fasteners.
  • 1/2 in. Drive M14 (14 mm) stubby XZN triple square bit.
Check Stock