Categories

Best Srocker G600s

Optic Mounting Plate for Glock(Non-MOS/Aftermarket Slide),Taurus GX4,G3C,Canik TP9SA-Compatible with ADE Stingray,Riton X3 Tactix PRD,Trijicon RMR/SRO,Swampox Kingslayer/Liberty/Justice red dot Sight

  • This optic dovetail plate made by ADE only fits genuine/standard glock that has a standard factory rear sight. It does NOT for MOS(optics ready) glock. It does NOT fit glock with AFTERMARKET slide..
  • Compatible with RD3-020 Raptor, RD3-023 Valkyrie, RD3-019 Stingray and Trijicon RMR/SRO(Screws provided for Trijicon and ADE). Also compatible with other red dots that shares the similar footprint, but provided screws may NOT work, such as Holosun HS407C/HS507C/HS508T, Riton X3 Tactix PRD, Trijicon RMR/SRO, Swampox Kingslayer/Liberty/Justice red dot sight. We recommend get the right size screws from a local hardware store..
  • The footprint of this plate is NOT compatible with other footprints. This plate does NOT fit other red dots such as Vortex Venom/Viper, Doctor, Burris Fastfire, Shield RMS/RMSc, Trijicon RMRcc, Deltapoint Pro, Swapfox sentinel, ADE Spike..
Check Stock

3CR Tactical Universal RMR Optic Adapter Mounting Plate

  • Precision CNC Machined from 7075-T6 aerospace grade Aluminum with Black anodizing finish..
  • The same kind of products on the market basically use 6061 aluminum but we use 7075, because 7075 aluminum is almost twice stronger than 6061....
  • Compatible with Trijicon RMR/SRO and Holosun 407C/507C/508T,Ultra Low Profile and lightweight.*NOT FIT THE FAKE MODELS.
  • One Piece Design for a Secure Zero Hold,Easy to install*100% MONEY-BACK warranty within 30 days of purchase*NO QUESTIONS ASKED. LIFETIME WARRANTY.
  • The kit includes 1X mount plate, 1X regular sealing plate,1X anti-flicker sealing plate, 3X RMR Screws (short),3Xsocket set screws and 1X Hex Key..
Check Stock

Black Scorpion Outdoor Gear Springfield XD-M Elite 4.5'' IWB Belt Wing Tuckable HC23-XDM45-CF

  • Compatible with the Springfield Armory XD-M 4.5'' barel, XD-M Elite 4.5'' barrel. The Belt Attachment Clip is compatible with belts that are up to 1.5'' wide..
  • Red-Dot Friendly: Virtually compatible with any RMR or SRO.
  • Open Muzzle: Allows threaded barrels to pass through.
  • Raised Sight-Line: 15mm clearance for most suppressor height sights.
Check Stock

Black Scorpion Outdoor Gear SCCY CPX-1 / CPX-2 Belt Wing Tuckable Holster Right HC23-CPX-BKRH

  • Compatible with the SCCY CPX-1 and CPX-2 3.1 inch barrel. The Belt Attachment Clip is compatible with belts that are up to 1.5 inch wide..
  • Red-Dot Friendly: Virtually compatible with any RMR or SRO.
  • Open Muzzle: Allows threaded barrels to pass through.
  • Raised Sight-Line: 15mm clearance for most suppressor height sights.
  • Mid-Rise Sweat Shield: Keeps Gun Away From your body and clothing.
Check Stock

Inside The Waistband Belt Wing Tuckable Holster fits Springfield XD-M Elite 3.8in (Black, Right-Hand Draw)

  • Compatible with the Springfield XD-M Elite 3.8in barrel. The Belt Attachment Clip is compatible with belts that are up to 1.5'' wide..
  • Red-Dot Friendly: Virtually compatible with any RMR or SRO.
  • Open Muzzle: Allows threaded barrels to pass through.
  • Raised Sight-Line: 15mm clearance for most suppressor height sights.
  • Mid-Rise Sweat Shield: Keeps Gun Away From your body and clothing.
Check Stock

Inside The Waistband Belt Wing Tuckable Holster fits Sig P365 X-Macro (Carbon Fiber, Right-Hand Draw)

  • Compatible with the Sig P365 X-MACRO 3.1” barrel. The Belt Attachment Clip is compatible with belts that are up to 1.5” wide..
  • Red-Dot Friendly: Virtually compatible with any RMR or SRO.
  • Open Muzzle: Allows threaded barrels to pass through.
  • Raised Sight-Line: 15mm clearance for most suppressor height sights.
  • Belt-Wing Mod: Pushes against the backside of your belt to reduce printing.
Check Stock

DPP Titanium Mounting kit/Plate/Adapter Compatible with Glock Trijicon RMR/SRO&Holosun 407C/507C/508T Titanium

  • Precision CNC Machined from 6AL4V aerospace grade Titanium with black finish..
  • Hard As Steel but 45% lighter than steel.Ultra Low Profile and lightweight..
  • Compatible with Trijicon RMR/SRO and Holosun 407C/507C/508T.One Piece Design for a Secure Zero Hold,Easy to install.*NOT FIT THE FAKE TRIJICON RMR.
  • 100% MONEY-BACK warranty within 30 days of purchase*NO QUESTIONS ASKED. LIFETIME WARRANTY.
  • The kit includes 1X mount plate, 1X regular sealing plate,1X anti-flicker sealing plate, 3X RMR Screws (short),3X socket set screws and 1X Hex Key..
Check Stock

LThyzszb Universal Offset Optic Red Dot Sight Mount for RMR T1 T2 SRO Micro Riser Mount Black

  • 1.【PROFESSIONAL AVIATION ALUMINUM OFFSET OPTIC MOUNT】 Offset Red Dot Sight Mount Includes 1 Base, 2 Plate, 8 Fixing Screws, and 3 Wrenches..
  • 2.【PREMIUM CRAFT & MATERIAL】Rugged 7075 Aluminum Matte Hard Coat Anodized , Offer Durable Safe Performance In Using, Lightweight & Solid-Style.....
  • 3.【 UNIQUE DESIGN】Universal Offset Red Dot Sights Mount, A wide selection of red dot sights are supported with interchangeable optic plates. It....
  • 4.【WIDELY USED】 Offset Micro Mount Contains a Plate 2 & a Plate 5, Plate 2 is Suitable for RMR / SRO / 407C / 507C / 508T. Plate 5 is suitable for....
  • 5. Any Issue, Just Contact us Through Your Buyer Center to Enjoy an Efficient Solution. We Stand by the Quality of our Product..
Check Stock

DPP Titanium Mounting kit/Plate/Adapter Compatible with Glock Trijicon RMR/SRO&Holosun 407C507C/508T (Aluminum)

  • Precision CNC Machined from 7075-T6 aerospace grade Aluminum with Black anodizing finish..
  • The same kind of products on the market basically use 6061 aluminum but we use 7075, because 7075 aluminum is almost twice stronger than 6061 aluminum..
  • Compatible with Trijicon RMR/SRO and Holosun 407C/507C/508T,Ultra Low Profile and lightweight.*NOT FIT THE FAKE TRIJICON RMR.
  • One Piece Design for a Secure Zero Hold,Easy to install*100% MONEY-BACK warranty within 30 days of purchase*NO QUESTIONS ASKED. LIFETIME WARRANTY.
  • The kit includes 1X mount plate, 1X regular sealing plate,1X anti-flicker sealing plate, 3X RMR Screws (short),3Xsocket set screws and 1X Hex Key..
Check Stock

ADE Universal Plate for Converting Trijicon RMR/SRO Footprint to Vortex Venom/Burris Fastfire/Shield RMS Footprint Converter Adapter Plate

  • Precision CNC Machined from 7075-T6 aerospace grade Aluminum with Black anodizing finish..
  • The same kind of products on the market basically use 6061 aluminum but we use 7075, because 7075 aluminum is almost twice stronger than 6061....
  • Compatible with Trijicon RMR/SRO and Holosun 407C/507C/508T,Ultra Low Profile and lightweight.*NOT FIT THE FAKE TRIJICON RMR.
  • One Piece Design for a Secure Zero Hold,Easy to install*100% MONEY-BACK warranty within 30 days of purchase*NO QUESTIONS ASKED. LIFETIME WARRANTY.
  • The kit includes 1X mount plate, 1X regular sealing plate,1X anti-flicker sealing plate, 3X RMR Screws (short),3Xsocket set screws and 1X Hex Key..
Check Stock

DPP Titanium Red Dot Mount/Plate/Adapter Compatible with Springfield XD Trijicon RMR/SRO&Holosun 407C/507C/508T

  • This Optic converter/adapter plate is made for any pistol slide that has a trijicon rmr optic cut, or optic plate can ONLY accept a trijicon rmr/sro....
  • Simply attach this adapter plate on the existing trijicon rmr optic cut as a regular optic plate. Screws are provided for over 25 popular red dot....
  • This adapter plate allow user to attach ADE RD3-006, RD3-09, RD3-012, RD3-013, RD3-018, RD3-019, Vortex Venom/Viper, Burris Fastfire 123, Sightmark....
  • Also compatible with Leica Tempus, Sig Romeo, Shield RMS/RMSC, Jpoint red dot sights..
  • Made in USA. This is the ONLY adapter(Made by ADE OPTICS) on the market to convert any pistol optic cut/plate that is with a trijicon rmr footprint,....
Check Stock

Ade Advanced Optics Stingray UMRD Micro Red Dot Sight for RMR Footprint/Mounting Plate/Slide/Plate Optics Ready Pistol - 6MOA

  • Ade Stingray is Designed to to the smallest and lightest red dot to fit any pistol mounting plate/slide/cut that is compatible with RMR/SRO, Holosun....
  • Ade Stingray created a iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the red dot to....
  • For non-optics ready pistols that need to use an optic plate/adapter to replace the pistol manufacture equipped rear sight, ADE Stingray's rear white....
  • Does NOT fit optic plate/cut made for Doctor type footprint. Comes with screws for several Optics Ready handguns. Does not comes with any mounting....
  • Just like $400 RMR competitors, It does not has a on/off power button. The light turns brighter or lower automatically. If you do not use it, put the....
Check Stock

Ade Advanced Optics Picatinny Mounting Plate/Adapter/Mount - Compatible with Trijicon RMR ADE Stingray Holosun HS407C/HS507C/HS508T Red Dot Sight…

  • This Optic converter/adapter plate is made for any pistol slide that has a trijicon rmr optic cut, or optic plate can ONLY accept a trijicon rmr/sro....
  • Simply attach this adapter plate on the existing trijicon rmr optic cut as a regular optic plate. Screws are provided for over 25 popular red dot....
  • This adapter plate allow user to attach ADE RD3-006, RD3-09, RD3-012, RD3-013, RD3-018, RD3-019, Vortex Venom/Viper, Burris Fastfire 123, Sightmark....
  • Also compatible with Leica Tempus, Sig Romeo, Shield RMS/RMSC, Jpoint red dot sights..
  • Made in USA. This is the ONLY adapter(Made by ADE OPTICS) on the market to convert any pistol optic cut/plate that is with a trijicon rmr footprint,....
Check Stock