Categories

Best Ssd For Mac Air 2017

Cloudeck NVMe SSD 512GB PCIe Gen3x4 Internal Solid State Drive with 3D NAND for MacBook Air (Mid 2013-2017), MacBook Pro(Retina, Late 2013-Mid 2015), Mac Pro(2013) & Mini (2014), iMac(2013-2017)

  • ⏩【Ultra Read &Write Speed】 Powered by NVMe interface (PCIe Gen 3.0 x4), the SSD’s sequential read and write performance levels of up to 1,800MB/s and 1,400MB/s..
  • ⏩【3D TLC NAND Technology】Triple-level cell (TLC) NAND stores 3 bits per cell. By adding more bits per cell, this reduces the cost and increases the capacity, keeping the Mac you love running faster, longer, and cooler than before..
  • ⏩【For Intensive Application】1 Year Warranty, Designed for macOS 10.13 and beyond. Ideal for 3D animation, rendering, photo and video editing, gaming, and other heavy workloads applications..
  • ⏩【Wide Compatibility】The 3D NAND NVMe PCIe Internal SSD fits for Mac Mini (2014), Mac Pro (2013), iMac (2013-2017), MacBook Air (2013-2017), MacBook Pro (2013-2015). Please match your device’s EMC to see if this drive is the right fit for you..
  • ⏩【Kindly Note】 Must update original SSD to mac OS 10.13 or later version before moving out. New SSD will not be recognized after replacement if original SSD installed 10.12 or earlier Mac OS..
Check Stock

JESOT NGFF M.2 NVMe SSD Convert Adapter Card for Upgrade MacBook Air 2013 2014 2015 2016 2017 and Mac Pro Retina 2013 2014 2015, NVMe AHCI SSD Upgraded Kit for A1465 A1466 A1398 A1502

  • ...0p, 660p, 760p, Toshiba XG3-XG4-XG5-XG5p-XG6 line, Samsung: 960 Evo, 960 Pro, 970 Evo, 970 Pro, WD: v1, v2 and v3, MyDigital: SBX - BPX. NOT support any SATA based SSD.
  • [Support System] - It is compatible with MacBook Air 11 “A1465 & MacBook Air 13” A1466 (Mid 2013-2017), MacBook Pro (Retina) 13 “ A1502 & 15" A1398 (Late 2013 - Mid 2015), Mac Pro ME253 MD878.
  • [Please Note] - Require Mac OS 10.13 High Sierra or Later.
  • DO NOT compatible with earlier than Mac OS 10.13 versions.
  • DO NOT support Samsung 970 Evo Plus, PM981, 950 Pro. Please use your original SSD to upgrades your Mac OS before installation.
Check Stock

512GB SSD PCIe NVMe 3D Gen3x4 TLC NAND Flash Hard Drive with A USB Bootable Installer for MacBook Air (2013-2015, 2017), MacBook Pro (2013-2015), iMac (2013-2019), Mac Pro (2013), Mac Mini (2014)

  • ✔[Maximum Performance]- – 512GB NVMe 3D TLC NAND PCIe 3.0 x4 SSD fast speed up to Read speeds up to 1800MB/s and Write speeds up to 1400MB/s..
  • ✔[Wide Compatibility]- -The 3D NAND NVMe PCIe Internal SSD fits for Mac Mini (2014), Mac Pro (2013), iMac (2013-2017), MacBook Air (2013-2017), MacBook Pro (2013-2015). Please match your device’s EMC to see if this drive is the right fit for you..
  • ✔[Package with A USB Bootable Installer]- -The package included 16GB USB Bootable Installer(High Sierra) to make it easy to install macOs. These is a detailed SSD installation guide in the package for reference..
  • ✔[Kindly Note]- -macOS 10.13 High Sierra (or later OS) must be installed on the Mac before installing the new ssd. These OS versions include an EFI firmware update for your Mac. Without the update, the new SSD will not be recognized..
  • ✔[For Intensive Application]- -We provide 1 Year Warranty, Designed for macOS 10.13 and beyond. Ideal for 3D animation, rendering, photo and video editing, gaming, and other heavy workloads applications..
Check Stock

FLEANE MZ13C 1TB 1024GB PCIe NVMe SSD Compatible with 2013-2017 MacBook Air, 2013-2015 MacBook Pro, 2013-2017 iMac A1418 A1419, 2014 Mac Mini A1347

  • [Compatible with] MacBook Air A1465 A1466 Mid2013-Mid2017, MacBook Pro A1502 A1398 Late2013-Mid2015, iMac A1418 A1419 Late2013-Mid2017.There is a very detailed table of supported models in the listing images. Please check carefully.The EMC number is the best way to match.
  • [Important note] macOS 10.13 High Sierra (or later OS) must be installed on the Mac before installing the new ssd. These OS versions include an EFI firmware update for your Mac. Without the update, the new SSD will not be recognized..
  • [Write and Read] 1TB NVMe 3D TLC NAND PCIe 3.0 x4 SSD fast speed up to: Read 1850MB/S, Write 1400MB/S. 1: 1 design according to the original SSD interface, it provides a perfect upgrade solution for your Macbook Air/Pro/iMac without using adapter card. (Different models of machines may test different read and write speeds.).
  • [Item contains] 1 x 1TB SSD, 1 x 16GB USB Bootable Installer (with OS Big Sur), 2 x Screwdrivers, 1 x SSD installation guide card..
  • [About warranty] We provide 3-year worry-free warranty. If you have any other questions, please feel free to contact us, we will provide the most professional service.(Before replacing the SSD, please disconnect the battery cable from the mainboard, Otherwise the computer may be damaged).
Check Stock

USB C 3.2 SSD Enclosure for 12+16 Pin MacBook SSDs for MacBook Pro 2013-2015, iMac 2013-2015, MacBook Air 2013-2017, Portable Aluminum SSD Adapter with Adjustable Indicator for MacBook SSD

  • 【MacBook SSD Enclosure】This SSD enclosure is compatible with Apple original Mac SSDs with 12+16 Pins, NOT compatible with Toshiba 12+16PIN SSD，NOT Support for NVMe SSD, SATA SSD..
  • 【 Extreme Speed Transmission】 Type-C to c 10Gbps high-speed transmission with USB 3.2 Gen 1 interface, the perfect solution for data transfer and data backup. One HD movie transfer only takes 2-5 seconds..
  • 【Aluminum Shell & RGB Design】This SSD adapter for Mac adopts an aluminum alloy shell, slim design, and durable and excellent heat dissipation. High-effective system protects your SSD from overheating when trading large files. Adjustable RGB Light shows the data transfer status, cool and nice touch..
  • 【Support Operating System】 Support System Multi OS, Windows, Mac OS, Linux, Android.Supports for 2013-2017 MacBook Air, 2013-2015 MacBook Pro Retina, 2013-2014 iMac, 2013 Mac Pro.
  • 【Easy Installation】JUST Unscrew the four fixing screws on the cover with a screwdriver and remove the cover from the SSD enclosure. Insert the SSD into the card slot, then close the case and tighten the screw. It allows quick and easy installation. play and plug..
Check Stock

QNINE PCIe SSD Adapter Card for 2013 2014 2015 2016 2017 MacBook Air Pro Retina, Hard Drive Controller Converter to Desktop PCI Express X4, Support Model A1465 A1466 A1398 A1502

  • The PCIe x4 adapter only support x4/ x8/ x16 pcie port.
  • can read data and write data in SSD, DO NOT SUPPORT AS THE SYSTEM STARTUP DISK..
  • SSD formated in Mac OS systerm can’t be compatible with Microsoft system,so new SSD without partition,ssd can’t be shown in table of “My Computer”, please use the Disk Manager in Windows to delete the old partitions and create a new partition..
  • Support : 2013-2017 Macbook Air(11″ or 13″) A1465 A1466 SSD..
  • Notice: Please make sure correct forward side pins (16+12) back side(14+11). Please make sure your SSD models before buying! It can not support 2010 and 2011 version MacBook Air A1370 and A1369 SSD,it can not support 2012 version MacBook Air A1465 and A1466 SSD,it can not support 2012 and Early 2013 Version MacBook Pro A1425 and A1398 SSD!.
  • Support : 2013-2017 Macbook Pro Retina(13″ or 15″) A1502 A1398 SSD..
Check Stock

GODSHARK PCIe SSD Adapter Card for 2013 2014 2015 2016 2017 MacBook Air Pro Retina, Hard Drive Controller Converter to Desktop PCI Express X4, Support Model A1465 A1466 A1398 A1502

  • can read data and write data in SSD, DO NOT SUPPORT AS THE SYSTEM STARTUP DISK..
  • Support : 2013-2017 Macbook Air(11″ or 13″) A1465 A1466 SSD..
  • SSD formated in Mac OS systerm can’t be compatible with Microsoft system,so new SSD without partition,ssd can’t be shown in table of “My Computer”, please use the Disk Manager in Windows to delete the old partitions and create a new partition..
  • Notice: Please make sure correct forward side pins (16+12) back side(14+11). Please make sure your SSD models before buying! It can not support 2010 and 2011 version MacBook Air A1370 and A1369 SSD,it can not support 2012 version MacBook Air A1465 and A1466 SSD,it can not support 2012 and Early 2013 Version MacBook Pro A1425 and A1398 SSD!.
  • The PCIe x4 adapter only support x4/ x8/ x16 pcie port.
  • Support : 2013-2017 Macbook Pro Retina(13″ or 15″) A1502 A1398 SSD..
Check Stock

USB C 3.2 Enclosure for 12+16 PIN MacBook SSDs, PCle SSDs Enclosure Supports for 2013-2017 MacBook Air, 2013-2015 MacBook Pro Retina, 2013-2014 iMac, 2013 Mac Pro, 2014 Mac Mini

  • ✅【Applicable SSD】- -USB 3.2 Type-C SSD enclosure is Compatible for original and INDMEM 12+16 PIN MacBook SSDs. NOT compatible with Toshiba 12+16PIN SSD..
  • ✅【Outstanding Transmission】- -Type-C to c 10Gbps high-speed transmission with USB 3.2 Gen 1 interface,measured continuous reading and writing. Read speed up to 950MB/s, write speed up to 850MB/s,steady and efficient..
  • ✅【Easy Setup 】- -Tool-free design allows quick and easy installation of your SSD Enclosure Adapter, support plug and play and hot-swap.Less than 3 minutes to install SSD and plug in..
  • ✅【Support Operating System】- -USB C Enclosure SSDs Compatible for Mid 2013-2017 MacBook Air, Late 2013 - Mid 2015 MacBook Pro Retina, Late 2013-2017 iMac, 2013 Mac Pro, 2014 Mac Mini..
  • ✅【Aluminum Alloy Shell】- - Adopts aluminum alloy shell, slim design, durable and excellent heat dissipation, reduced power consumption.be portable and easy to carry..
Check Stock

M.2 NVME SSD Convert Adapter Card for Upgrade MacBook Air ( 2013-2017 )

  • ➤ This NVME SSD Convert Adapter is DIY kit for assembling a upgraded SSD replacement for MacBook with large capacity NVME SSD.
  • ➤ It is compatible with MacBook Air 11” A1465 & MacBook Air 13” A1466 (Mid 2013-2017), MacBook Pro (Retina) 13" A1502 & 15" A1398 (Late 2013 - Mid 2015), Mac Pro ME253 MD878.
  • ➤ Require macOS 10.13 High Sierra or Later.
  • DO NOT compatible with earlier than macOS 10.13 versions. Please use your original SSD to upgrades your macOS before installation.
  • ➤ Used to upgrade your storage capacity, perfect for tech enthusiasts, high-end gamers, 4K & 3D content designers.
  • ➤ Support M.2 NVME/AHCI SSD such as Samsung 960 EVO, Samsung 970 EVO/PRO, WD Black, Crucial P1, HP EX920, ADATA SX8200, Intel 600p series NVME SSD and so on.
Check Stock

Willhom M.2 NVME SSD Convert Adapter Card for Upgrade MacBook Air (2013-2017)

  • 1* M.2 NVME SSD Convert Adapter Card + 1* Screwdriver + 3* Screws included. The NVME SSD Convert Adapter is DIY kit for assembling an upgraded SSD replacement for MacBook with large capacity NVME SSD. ( DO NOT fit external SSD enclosure ).
  • Compatible with MacBook Air 11” A1465 & MacBook Air 13” A1466 (Mid 2013-2017), MacBook Pro (Retina) 13" A1502 & 15" A1398 (Late 2013 - Mid 2015), Mac Pro ME253 MD878.
  • Require macOS 10.13 High Sierra or Later, NOT compatible with earlier than macOS 10.13 versions( 2010 2011 2012 27’’ and 21.5’’ iMAC A1419 A1418). Please use your original SSD to upgrade your macOS before installation.
  • Support M.2 NVME/AHCI SSD such as Samsung 960 EVO, Samsung 970 EVO/PRO, WD Black, Crucial P1, HP EX920, ADATA SX8200, Intel 600p series NVME SSD and so on..
  • Tips: macOS failed on resume from hibernating with some NVME SSDs of some brands. Have to turn off laptop all the time instead of close the lid and go.
Check Stock

USB C 3.2 Gen2 MacBook SSD Enclosure for Apple Flash SSDs 12+16 PIN MacBook Pro MacBook Air Mac Pro iMac from 2013 to 2017, with Adapter to Support M.2 NVMe SSDs (PCIe NVME/PCIe AHCI Protocol)

  • ... Pins. Compatible with Toshiba and OWC brand SSDs. Also support M.2 NVMe SSDs with an enclosure interface adapter..
  • [2022 Latest High Speed Chip] Support PCIe NVMe protocol / PCIe AHCI protocol SSD, better work efficiency and more secure data protection. USB 3.2 Gen 2 Macbook air ssd enclosure is compatible for 2013-2017 MacBook Air, 2013-2015 MacBook Pro Retina, 2013-2014 iMac, 2013 Mac Pro. Compatible with Windows, Mac OS, Linux, iOS..
  • [Faster Data Transmission] Macbook pro ssd enclosure with USB 3.2 Gen2 interface, the transmission speed is 10Gbps(USB-C to USB-A). It can also reach 20Gbps transmission speed with USB 3.2 Gen2x2.(USB-C to USB-C). Downward compatibility with USB 3.1 gen2, USB 3.0, USB 2.0. It only takes a few seconds to save and transfer files..
  • [SSD Installation Steps] Unscrew the four fixing screws on the cover with a screwdriver and remove the cover from the ssd enclosure. Align the ssd with the card slot on the ssd base and gently push it in. Tighten the screws with a screwdriver to fix the ssd on the ssd base. Tighten the 4 fixing screws on the cover with a screwdriver, and the installation of the ssd is completed. ❤Note: if the M2 ssd is connected, first install the adapter and then insert the M2 ssd..
Check Stock

MAIWO MacBook SSD Enclosure, Type-C to 12+16 PIN Apple Flash AHCI Hard Drive Adapter for 2013-2017 MacBook Pro, MacBook Air, Mac Pro, iMac, USB3.2 GEN2x2 Max 20Gbps

  • 【Compatibility】This External Hard Drive Enclosure for 12+16 PIN AHCI SSD is compatible with original 12+16 PIN MacBook SSDs including 2013-2017 MacBook Air, 2013-2015 MacBook Pro Retina, 2013-2014 iMac, 2013 Mac Pro, 2014 Mac Mini. (If you need this enclosure to support PCIe NVMe SSD, please make sure your NVMe SSD also supports AHCI and you need an adapter to connect it to this enclosure.).
  • 【20Gbps Transmission Speed】Equip with JMS586A chipset and USB 3.2 GEN2x2 output interface, the transmission speed can reach 20Gbps..
  • 【Excellent Heat Dissipation】This 12 16 pin mac ssd enclosure is made of aluminum alloy with CNC progress, very durable and compact, comes with a silicone pad for quicker heat dissipation to protect the hard disk..
  • 【Easy Installation】This 12+16 pin ssd adapter equips with screw and screwdriver. Just take out the ABS bracket from the enclosure, then insert SSD to the slot and fix it with screws..
  • 【Wide Application】Support Windows XP/7/8/10/11, Linux and Mac OS. Work with Desktop, Laptop, Xbox, PS5/PS4/PS3, Smart TV, Router, etc..
Check Stock

ACASIS USB C 3.2 SSD Enclosure for Apple Flash SSDs 12+16 PIN MacBook Pro,MacBook Air, Mac Pro, iMac from 2013 to 2017 Portable Storage Enclosure Compatible with M.2 Nvme SSD with Adapter

  • [More Compatibility] This USB C 3.2 SSD enclosure support for apple Mac SSD with 12+16PIN which was original factory-installed. NOT SUPPORT Toshiba 12+16PIN SSD and all SATA SSD. NOT compatible with Third-party SSDs, including OWC SSDs. Support M.2 Nvme SSD after installing the enclosed interface adapter..
  • [Faster Data Transmission] 10Gbps transmission speed with USB 3.2 Gen2 interface. Save and transfer data in a seconds. It can also reach 20Gbps transmission speed with USB 3.2 Gen2x2 if the computer supports..
  • [Friendly Design] Aluminum alloy case for quicker heat dissipation. ACASIS USB C 3.2 SSD enclosure is sturdy and portable..
  • [System Requirements] ACASIS USB C 3.2 SSD enclosure supports Windows7/8/10/11,Mac OS 10.0,Linux 2.6 or later.Supports for 2013-2017 MacBook Air, 2013-2015 MacBook Pro Retina, 2013-2014 iMac, 2013 Mac Pro.
  • [Easy Installation] Just take out the PCB board from the enclosure,then fully insert SSD to card slot of the PCB board, put PCB back into the enclosure,tighten the screws.Plug and play, support hot plug.On Windows OS, hard disk will not available on "This PC"/ "My computer.
Check Stock