Categories

Best Ssd Sleeve Case

RETROFLAG NESPi 4 Case Raspberry Pi 4 Case with SSD CASE,USB-C Power Supply,HDMI Splitter Switch & Cooling Fan & Heatsinks for Raspberry Pi 4 Model B

  • 【Compatibility】NESPi 4 CASE specifically designed for Raspberry Pi 4 Model B (2GB, 4GB, or 8GB).
  • 【Safe Shutdown and Reset, Functional LED power indicator】It will be more safer when shutdown and reset (Scripts are necessary). The Pi 4B....
  • 【SSD CASE(NOT including SSD)】This NESPi 4 Case comes with NES Cartridge style case for 2.5'' SSD, easy to install your SSD, enjoy an overall....
  • 【Strong Heat Dissipation】30x30x7mm Cooling fan with customize aluminum alloy specially designed for Raspberry Pi 4 Model B to get better heat....
  • 【Access to All ports】NESPi 4 Case allows you to access to all ports of Pi 4B , and slots on the side of NESPi 4 CASE to allow more space for you....
Check Stock

RETROFLAG NESPi 4 Case Kit Raspberry Pi 4 Case with SSD CASE HDMI Splitter Switch & Cooling Fan & Heatsinks & USB Wired Game Controllers for Raspberry Pi 4 Model B

  • 【Compatibility】NESPi 4 CASE specifically designed for Raspberry Pi 4 Model B (2GB, 4GB, or 8GB).
  • 【Safe Shutdown and Reset, Functional LED power indicator】It will be more safer when shutdown and reset (Scripts are necessary). The Pi 4B....
  • 【SSD CASE(NOT including SSD)】This NESPi 4 Case comes with NES Cartridge style case for 2.5'' SSD, easy to install your SSD, enjoy an overall....
  • 【Thermal Module & Fan,Game controller】Cooling fan with customize aluminum alloy specially designed for Raspberry Pi 4 Model B to get better heat....
  • 【Access to All ports】NESPi 4 Case allows you to access to all ports of Pi 4B , and slots on the side of NESPi 4 CASE to allow more space for you....
Check Stock

GeeekPi Raspberry Pi Mini Tower NAS Kit, Raspberry Pi ICE Tower Cooler with PWM RGB Fan, M.2 SATA SSD Expansion Board, GPIO 1 to 2 Expansion Board for Raspberry Pi 4 Model B

  • This Raspberry Pi Mini Tower NAS kit contains an M.2 SATA SSD expansion board which can expand the mass storage for your Raspberry Pi. The case is made of ABS material,This kit turns your Raspberry Pi into a mobile mini-host..
  • NOTE: The RGB light on Fan and mood light will not light up unless installed driver, and OLED will not display any information untill you have enabled it !!! Please read the manual carefully and follow the steps to enable it.Please purchase M.2 SATA SSD 2280 mass storage device, It dose NOT support NVME SSD!!!.
  • M.2 SATA SSD 2280/2260/2240 mass storage adapter board,supports up to 2TB M2. SATA SSD solid-state drive.
  • Package Includes: 1 x ABS Mini Tower Case,1 x ICE-Tower CPU Cooling Fan,2 x Acrylic Side Panel,1 x 0.96inch OLED Display (Already mounted on the case ),1 x GPIO Edge expansion board,1 x M.2 SATA SSD Shield,1 x Assembly manual(Note: Raspberry Pi 4B is Not included in the package).
Check Stock

GeeekPi Retroflag NESPi 4 Case Kit with Raspberry Pi 4 4GB RAM Board, Pi 4 Case with SSD CASE, HDMI Splitter Switch & Cooling Fan & Heatsinks & USB Wired Game Controllers for Raspberry Pi 4 Model B

  • 【Compatibility】NESPi 4 CASE specifically designed for Raspberry Pi 4 Model B (2GB, 4GB, or 8GB).
  • Raspberry Pi 4 Model B 4GB Motherboard is Included.
  • 【Safe Shutdown and Reset, Functional LED power indicator】It will be more safer when shutdown and reset (Scripts are necessary). The Pi 4B indicator is visible after installation..
  • 【SSD CASE(NOT including SSD)】This NESPi 4 Case comes with NES Cartridge style case for 2.5'' SSD, easy to install your SSD, enjoy an overall better computer experience!.
Check Stock

XANAD Case for Samsung T5/T3 SSD 1TB 2TB 500GB 250GB Within Size 3 x 1.2 x 1 Portable External Solid State Hard Drives Not fit Samsung T7/T7 Touch - Travel Carrying Bag Inside Grey

  • Greater Capacity : The inner design of XANAD case have enough space to storage your Samsung T5 / T3 SSD and its accessories, like usb cable..
  • Assured Protection : The interior is made of super-elastic VELVET and the exterior is made of high quality EVA material , which can protect the ssd....
  • Perfect Travel Carrying Case : Comes with comfortable Strong Handle to carry easily and this hard case is lightweight and compact to fit in your bag ,....
  • Perfect Fit ：The case is tailored for Samsung T5 / T3 SSD . Size : 5.3 x 3.5 x 1.2 inch , weight : 86.7g / 0.19 lbs ..
  • Packing Include: Case only (the samsung ssd and cable is not included).
Check Stock

GeeekPi Raspberry Pi Mini Tower NAS Kit, Raspberry Pi ICE Tower Cooler with PWM RGB Fan, M.2 SATA SSD Expansion Board, GPIO 1 to 2 Expansion Board, 18W QC3.0 Power Supply for Raspberry Pi 4 Model B

  • This Raspberry Pi Mini Tower NAS kit contains an M.2 SATA SSD expansion board which can expand the mass storage for your Raspberry Pi. The case is made of ABS material,This kit turns your Raspberry Pi into a mobile mini-host..
  • NOTE: The RGB light on Fan and mood light will not light up unless installed driver, and OLED will not display any information untill you have enabled it !!! Please read the manual carefully and follow the steps to enable it.Please purchase M.2 SATA SSD 2280 mass storage device, It dose NOT support NVME SSD!!!.
  • The 0.96 inch OLED screen was already mounted on the case.28x64pixels, default I2C address: 0x3C.
  • M.2 SATA SSD 2280/2260/2240 mass storage adapter board,supports up to 2TB M2. SATA SSD solid-state drive.
  • Package Includes: 1 x ABS Mini Tower Case,1 x ICE-Tower CPU Cooling Fan,2 x Acrylic Side Panel,1 x 0.96inch OLED Display (Already mounted on the case ),1 x GPIO Edge expansion board,1 x M.2 SATA SSD Shield,1 x QC 3.0 Power supply,1 x Assembly manual(Note: Raspberry Pi 4B is Not included in the package).
Check Stock

ORICO M.2 Enclosure for NVMe SSD, USB4.0 40Gbps Type-C to M Key B+M Key 2280 Aluminum External SSD Case Compatible with Thunderbolt 3/4 USB3.2/3.1/3.0/ Type-C-M2V01

  • 【Multiple Transmission Protocol 】ORICO M.2 NVMe SSD external case adopts dual-chip master which support USB4.0 and fully compatible with Thunderbolt 3/Thunderbolt 4 USB3.2/3.1/3.0/Type-C (USB2.0 and below not compatible)..
  • 【40Gbps High Speed 】With USB4.0 Type-C output interface, it supports the maximum transmission speed up to 40Gbps. The measured maximum continuous read speed can reach 2700MB/s, and the continuous write can reach 1400MB/s.（This data comes from ORICO laboratory. Please note that the speed is different in different environments.）.
  • 【Only for M.2 2280 NVMe SSD】ORICO M.2 SSD Enclosure is specially designed for M Key & B+M Key NVMe SSD up to 2TB capacity. The applicable SSD size is 2280. (Does not support NGFF SATA M.2 SSD, M.2 PCIe AHCI SSD, mSATA SSD.).
  • 【Easy to Use】You just loosen the screw of the cover, put your SSD gently into SSD external housing, then fix the cover with a screw and connect cable to start work. Plug and play. No driver needed. Compact and portable. Easy to carry with lanyard hole..
  • 【Universal Compatibility】ORICO M.2 SSD case includes supports Windows/ Mac / Linux system, not only for PC and laptop, but also for smart TV, smart router and PS4 etc. NOTE: To achieve thunderbolt speed, please use thu....
Check Stock

GODSHARK 2.5' Inch IDE to SATA Adapter, Convert Laptop 44 Pin Male IDE PATA HDD Hard Disk Drive SSD to a Serial ATA Port

  • Low Profile Half-Heigh mSATA SSD to 2.5 inch IDE 44pin Hard Disk Case Enclosure for Notebook Laptop.
  • 50mm (1.8 inches) MSATA SSD to 2.5 inches Notebook IDE Adapter with case..
  • This adapter using JM20330 Serial ATA Bridge Chip..
Check Stock

Geekworm for Raspberry Pi 4, X862 V2.0 M.2 NGFF SATA SSD Storage Expansion Board UASP Supported Compatible with Raspberry Pi 4 Model B Only Support Key-B 2280 SSD

  • √[Important]Strongly recommend to use 5.8G wifi AP instead of 2.4G wifi AP, according to the feedback if use the external USB device (like mouse, keyboard, display) or use X857-C3 metal case(ASIN:B08VJ6P48B ), the system maybe unstable or not boot from the SSD. Must format the new SSD before use..
  • √Updated X862 V2.0 M.2 NGFF SATA SSD Shield can support up to 2TB m.2 NGFF SSD solid-state drive.
  • √ Only supports Raspberry Pi 4 Model B.
  • √ Supports M.2 NGFF 2280 SSD lengths ONLY.
  • √ UASP supported only, not support TRIM.
  • √ How to power RPi 4&X862: 5Vdc +/-5% , Powered by Raspberry Pi 4 Type-C Power In port.
  • √ How to power RPi 4&X862 V2.0& X735: 5Vdc +/-5% , Powered by X735 Type-C or DC Jack Power In port.
  • Recommend to use Geekworm UL listed 5V 4A Type-C power adapter (ASIN:B09J856PND)..
  • √ Matching metal case for RPi 4&X862 V2.0&X735/X708, refer to X857-C3 Case(ASIN:B08VJ6P48B ), BUT note the power control switch should be connect to X735(ASIN:B07R45W1LN)/X708(ASIN:B08DNRYM4Y), there is no PWR port for external power switch on X862 V2.0..
  • √ Allows booting OS from your HDD/SSD for faster app opens, web serving and file copying, refer to Geekworm WiKi search(Does_the_X825/X855_support_USB_boot).
  • If the SSD is not recoginzed or other issue....
Check Stock

Sinreton 736pcs PC Computer Standoffs Screws Assortment Kit for 2.5\ SSD, Hard Drive, Computer Case, Motherboard, Fan, Power Graphics

  • [10 different size screws]: use for 2.5" SSD, hard drive,computer case, power supply, motherboard, hard drives, fan and floppy,CD-ROM drives.
  • [Style]:hard driver screws(M3.5x5mm),hand twist case screw,Main board fixed screws (M3 x 5),CD-ROM set screws (M3 x 4),fan screws(M5x10),case screws screw (M3.5 x 6),M3 washers,2.5" M3 ssd screws.
  • [Material]: Made of high quality black zinc plated which have superior rust resistance and excellent oxidation resistance.
  • [Application]:Perfect for 2.5" SSD, Hard Drive, computer case, power supply, Mainboard/motherboard, fan and floppy/CD-ROM/DVD-ROM drives.
  • [Total]: 736pcs computer screws with a storage box.great for PC building hobbyist.
Check Stock

PNY SSD 480GB CS900 2.5' Sata III Internal Solid State Drive SSD (SSD7CS900-480-RB) Bundle with (1) Everything But Stromboli SSD/HDD Enclosure USB 3.0

  • This SSD with Enclosure Bundle includes (1) 480GB PNY CS900 SSD and (1) Everything But Stromboli SDD/HDD Enclosure for SATA 2.5”.
  • Make your laptop or desktop computer better! Experience the difference with super-fast application loads and OS boot times - Compatible with PNY SSD Enclosure (included) so you can turn your SSD or HDD into an external hard drive with case.
  • Boosts burst write performance, giving it great speed for typical PC workloads - Shock-resistant for long lasting durability, so dropping your computer won't ruin it all!.
  • Phenomenal performance with up to 535MB/s seq. read and 500MB/s seq. write speeds - Very low power consumption and also backwards compatible with SATA-II 3Gb/s.
  • SSD Enclosure Included – protect your SATA 2.5 Hard Drive or SSD with this enclosure case with USB 3.0 cord.
Check Stock

BobjGear Bobj Rugged Tablet Case for Lenovo 10e Chromebook Tablet Kid Friendly Batfish Blue

  • Hard travel case for SanDisk 250GB / 500GB / 1TB / 2TB Extreme Portable SSD SDSSDE60 (it can not fit the SanDisk Extreme PRO Portable External SSD).....
  • The case is shockproof, dustproof and Semi-waterproof. It can effectively absorb impacts and reduce damages caused by accidentally bumping, and....
  • CONVENIENT DESIGN: Steady hand strap for portability. Classic zipper convenience for easy in Opening and Closing..
  • EASY TO CARRY: This hard case for SanDisk 250GB / 500GB / 1TB / 2TB Extreme Portable SSD SDSSDE60 is lightweight and compact can fit in your backpack,....
  • Risk-free Purchase: We will 100% full refund, if there are quality problems, this is totally risk-free buy. CLICK the Orange button to Order Now!.
Check Stock

PNY SSD 120GB CS900 2.5' Sata III Internal Solid State Drive SSD (SSD7CS900-120-RB) Bundle with (1) Everything But Stromboli SSD/HDD Enclosure USB 3.0

  • This SSD with Enclosure Bundle includes (1) 120GB PNY CS900 SSD and (1) Everything But Stromboli SDD/HDD Enclosure for SATA 2.5”.
  • Make your laptop or desktop computer better! Experience the difference with super-fast application loads and OS boot times - Compatible with PNY SSD Enclosure (included) so you can turn your SSD or HDD into an external hard drive with case.
  • Boosts burst write performance, giving it great speed for typical PC workloads - Shock-resistant for long lasting durability, so dropping your computer won't ruin it all!.
  • Phenomenal performance with up to 535MB/s seq. read and 500MB/s seq. write speeds - Very low power consumption and also backwards compatible with SATA-II 3Gb/s.
  • SSD Enclosure Pack Included – protect your SATA 2.5 Hard Drive or SSD with this enclosure case with USB 3.0 cord.
Check Stock