Categories

Best Stainless Bearing Housing

Rockler 921727 Rail Coping Sled

  • 【SBR16 LINEAR RAIL】- Two 2000mm/78.8″ long SBR16 rail shafts, and 4 SBR16UU blocks are included in the package. Smooth sliding blocks moving freely..
  • 【CARBON STEEL MATERIAL】- Parts are made of carbon steel, with quality bearing steel linear bearings and aluminum alloy housing. Surface chrome plating treatment to be anti-rust, high hardness and more durable..
  • 【SMOOTH SLIDING SYSTEM】- With industrial-grade standard SBR block and a high precision linear bearing inside, the original rail set can be stabilized by rail axle bearing rail and aluminum alloy support..
  • 【EFFORTLESS TO INSTALL】- 5 pre-drilled holes ensures easy mounting, no need for maintenance. Stainless steel Linear optical axis guide bearings linear movement. 4 pieces SBR16UU Bearing Blocks afforded..
  • 【WIDE USES】- Gross Weight: 25.35 lb (11.5 kg), lightweight design for easy to use. Suitable for DIY CNC routers, lathes, machine tools, bending machines, laser welding machines, etc..
Check Stock

UYGALAXY Linear Actuator Controller DC Motor 12V Momentary Switch Forward/Reverse Wireless Remote Control DPDT Relay for Motors

  • 【SBR16 LINEAR RAIL】- Two 2000mm/78.8" long SBR16 rail shafts, and 4 SBR16UU blocks are included in the package. Smooth sliding blocks moving freely..
  • 【CARBON STEEL MATERIAL】- Parts are made of carbon steel, with quality bearing steel linear bearings and aluminum alloy housing. Surface chrome plating treatment to be anti-rust, high hardness and more durable..
  • 【SMOOTH SLIDING SYSTEM】- With industrial-grade standard SBR block and a high precision linear bearing inside, the original rail set can be stabilized by rail axle bearing rail and aluminum alloy support..
  • 【EFFORTLESS TO INSTALL】- 5 pre-drilled holes ensures easy mounting, no need for maintenance. Stainless steel Linear optical axis guide bearings linear movement. 4 pieces SBR16UU Bearing Blocks afforded..
  • 【WIDE USES】- Gross Weight: 25.35 lb (11.5 kg), lightweight design for easy to use. Suitable for DIY CNC routers, lathes, machine tools, bending machines, laser welding machines, etc..
Check Stock

SRC16 Sealmaster New Ball Bearing Cartridge Unit

  • Cartridge block with ball bearing insert for use with cylindrical bore housings.
  • Steel cartridge housing and single-row radial ball bearing for applications that support high radial loads.
  • Relubricatable solid one-piece cartridge housing for maximum strength and rigidity.
  • Fixed-type bearing with two set screws set apart at 120 degrees for secure attachment to a cylindrical shaft.
  • Felt labyrinth seal for protection against contaminants, and for less drag and heat generation than heavy contact seals.
Check Stock

Bang II (Feat. Uppercase 5ive)

  • Fully milled gearbox housing made of 6061-T6 aluminum for the rear axle of ATOPRC.
  • Due to its dimensional stability results in a higher load capacity and service life of bevel gear and ball bearings. The problem of the torn fastening thread has an end with this case.
  • The bearing adapters are included in the set.
  • We recommend gluing the bearings with threadlocker y0113. For mounting the bearing adapters in the housing we recommend Bindulin silicone y19015. To use HD differential shafts y1477, the Atoprc bearing adapters must be machined.
Check Stock

Industrial Black Metal Furniture Legs,Black Cast Iron Table Legs,RetroHeavy Duty Square Tube Desk Legs,Metal Dining Coffee Work Table Bench Furniture Legs,Set of 2

  • Two-bolt housing with ball bearing insert for a ready to mount installation.
  • Cast iron housing and steel bearing unit for carrying shafts with radial or radial and thrust loads.
  • Relubricatable solid one-piece housing pillow block for maximum strength and rigidity.
  • Non-expansion-type bearing with setscrew locking collar for secure attachment to guided shaft.
  • Felt seal to protect against contaminants and retain lubrication.
Check Stock

UCT202-010T NTN New Ball Bearing Take Up

  • Take-up block with spherical roller bearing insert for use with a Rexnord center pull frame.
  • Cast-iron housing and self-aligning steel bearing unit for carrying shafts with radial or radial and thrust loads.
  • Relubricatable solid one-piece housing take-up block for maximum strength and rigidity.
  • Fixed-type bearing with a single setscrew locking collar for secure attachment to a cylindrical shaft.
  • Metal clearance seal for no speed or temperature limitations, and no frictional drag.
Check Stock

SKF F2B 100-RM Ball Bearing Flange Unit, 2 Bolts, Set Screw Locking, Regreasable, Contact Seal, Cast Iron, 1\ Bore, 3-7/8\ Bolt Hole Spacing, 3150lbf Dynamic Load Capacity

  • Two-bolt flange-style housing for a ready-to-mount installation where surface and guided shaft are perpendicular.
  • Single-row deep groove ball bearing insert accommodates misalignments between the shaft and the housing.
  • Cast iron housing and steel bearing unit for carrying shafts with radial or radial and thrust loads.
  • Set screw locking for secure attachment to shaft.
  • Contact seals on both sides of the bearing keep lubricant in and contaminants out.
Check Stock

SKF F2B 108-RM Ball Bearing Flange Unit, 2 Bolts, Set Screw Locking, Regreasable, Contact Seal, Cast Iron, 1-1/2\ Bore, 5-21/32\ Bolt Hole Spacing, 6900lbf Dynamic Load Capacity

  • Two-bolt flange-style housing for a ready-to-mount installation where surface and guided shaft are perpendicular.
  • Single-row deep groove ball bearing insert accommodates misalignments between the shaft and the housing.
  • Cast iron housing and steel bearing unit for carrying shafts with radial or radial and thrust loads.
  • Set screw locking for secure attachment to shaft.
  • Contact seals on both sides of the bearing keep lubricant in and contaminants out.
Check Stock

Yeah Racing Signal 10 Master Competition 40x40mm Cooling Fan #YA-0534

  • Fan Size: 40*40*12mm, Amp Dram at 8.4v: 0.61.
  • Operating voltage 6.5-8.4v, Plastic Blade and Frame Housing.
  • Dual ball Bearing, Stainless steel shaft core, Wire Length 200mm.
  • Connector Futaba, Fan Speed: 19000 R.P.M (+/-10%).
  • The maximum power input voltage is 8.4v (2 cells Li-Po).
Check Stock

Sealmaster NP-27 Pillow Block Ball Bearing Non-Expansion Type Normal-Duty Regreasable Setscrew Locking Collar Felt Seals Cast Iron Housing 1-11/16 Bore 2-1/8 Base to Center Height 5-3/4 Bolt Hole Spacing Width

  • Two-bolt housing with ball bearing insert for a ready to mount installation.
  • Cast iron housing and steel bearing unit for carrying shafts with radial or radial and thrust loads.
  • Relubricatable solid one-piece housing pillow block for maximum strength and rigidity.
  • Non-expansion-type bearing with setscrew locking collar for secure attachment to guided shaft.
  • Felt seal to protect against contaminants and retain lubrication.
Check Stock

PNBO 2 PCS SBR16-2000mm Linear Rail, Linear Guide 2 Linear Guide Rails and 4 Square Type Carriage Bearing Blocks,Linear Rails and Bearings Kit,for DIY CNC Routers Lathes Machine

  • 【SBR16 LINEAR RAIL】- Two 2000mm/78.8" long SBR16 rail shafts, and 4 SBR16UU blocks are included in the package. Smooth sliding blocks moving freely..
  • 【SMOOTH SLIDING SYSTEM】- With industrial-grade standard SBR block and a high precision linear bearing inside, the original rail set can be stabilized by rail axle bearing rail and aluminum alloy support..
  • 【CARBON STEEL MATERIAL】- Parts are made of carbon steel, with quality bearing steel linear bearings and aluminum alloy housing. Surface chrome plating treatment to be anti-rust, high hardness and more durable..
  • 【EFFORTLESS TO INSTALL】- 5 pre-drilled holes ensures easy mounting, no need for maintenance. Stainless steel Linear optical axis guide bearings linear movement. 4 pieces SBR16UU Bearing Blocks afforded..
  • 【WIDE USES】- Gross Weight: 25.35 lb (11.5 kg), lightweight design for easy to use. Suitable for DIY CNC routers, lathes, machine tools, bending machines, laser welding machines, etc..
Check Stock

ECO-FLO Products EFSUB15-123 Submersible Deep Water Well Pump, 3 Wire, 230v, 4 Inch, 1 1/2 HP, 14 GPM

  • Stainless steel pump shaft is precision ground for exact bearing fit and straightness.
  • Precision molded impellers and diffusers.
  • Stainless steel pump housing for maximum protection against corrosion.
  • Download the User Manual under the Technical Specification section of this page for safety, installation, troubleshooting, and warranty information.
  • Click on the ECO-FLO Products link at the top of this page to see more pump options from ECO-FLO Products.
Check Stock

Linear Rail 2PCS SBR16-1500mm Linear Slide Rail 4PCS SBR16UU Bearing Block CNC Kit Linear Rails and Bearings Kit CNC Rails Linear Rail Set forAutomated Machines and Equipments

  • 【SBR16 LINEAR RAIL】- Two 1500 mm (59") long SBR16 rail shafts, and 4 SBR16UU blocks are included in the package. Smooth sliding blocks moving freely..
  • 【SMOOTH SLIDING SYSTEM】- With industrial-grade standard SBR block and a high precision linear bearing inside, the original rail set can be stabilized by rail axle bearing rail and aluminum alloy support..
  • 【CARBON STEEL MATERIAL】- Parts are made of carbon steel, with quality bearing steel linear bearings and aluminum alloy housing. Surface chrome plating treatment to be anti-rust, high hardness and more durable..
  • 【EFFORTLESS TO INSTALL】- 5 pre-drilled holes ensures easy mounting, no need for maintenance. Stainless steel Linear optical axis guide bearings linear movement. 4 pieces SBR16UU Bearing Blocks afforded..
  • 【WIDE USES】- Gross Weight: 21.6 lb (9.8 kg), lightweight design for easy to use. Suitable for DIY CNC routers, lathes, machine tools, bending machines, laser welding machines, etc..
Check Stock