Categories

Best Stainless Butt welded Concentric Reducer

QiiMii Sanitary Fitting Reducer Fitting SS304 Tri Clamp Ferrule Style 3\ Tube OD to 2\ Tube OD (3 INCH X 2 INCH )

  • Ferrule Size(76MM end):91mm ferrule fits 3" tri clamp.
  • Ferrule Size(51MM end):64mm ferrule fits 2" tri clamp.
  • Concentric reducer fitting to connect two pipes of different diameters that are along the same pipe axis.
  • Fitting clamps to tubing on both ends for a non-permanent seal, providing take-down access.
  • Made of Stainless steel SS304,there for resistance to corrosion and high temperatures.
Check Stock

FLKQC Butt Clamps 16 pcs Butt Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding Butt Clamp

  • Butt Clamps Specification:Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • How To Use Butt Welding Clamps : Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 16 clamps for larger projects, then joint weld between them.
  • Great Quality Butt Welding Clamps: Panel welding clamps are constructed of galvanized steel material to ensure maximum durability and strength while resisting rust.
  • Butt Clamps Wide Application: Use the Welding Square Clamp Set to pinch sheet metal panels level to each other.
  • While these metal clamps hold panels edge to edge with a 1mm gap, you can quickly weld the sheets together.
  • Butt Clamps Package Included: Welding accessories set includes 16 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
Check Stock

VCT 24 pc Butt Welding Clamps Weld Sheet Metal Auto Car Door Skin Panel Fender New

  • Suitable for metal straight panel or curved panel complex industry. These small fixtures hold panels of any shape anywhere-edge-to-edge, and are fully fixed before butt welding, leaving only a small gap that allows the weld to fully penetrate. Once the two parts are tack welded together, the wing nut is loosened, and the elbow lever is removed and the clamp is removed from work before final welding..
  • To align and clamp sheet metal panels for precise spot welding,butt welding,edge-to-edge welding and tacking in place.
  • For precise spot welding, positioning, butt welding and edge-to-edge welding, fully align and clamp the metal plates..
Check Stock

EVIL ENERGY 2.75 ID to 3 OD Exhaust Pipe Reducer Adapter 304 Stainless Steel Universal

  • Size: Small Diameter: 2.75" (2 3/4inch) ID/69.85mm (Fits over 2.75" OD Pipe). Large Diameter: 3" OD/76.20mm (Fits inside 3" ID Component). Length may....
  • Fitment: Universal fit for all exhaust / turbo / intercooler / intake piping connection. Welding is recommended..
  • Category: Pipe to Component (Use when your pipe is smaller than your component).
  • Material: 304 stainless steel. Package: 1PC 2.75 inch ID to 3 inch OD exhaust reducer..
  • EVIL ENERGY provides 3-month warranty for this exhaust pipe adapter reducer. Professional installation is highly recommended. Any problem you have,....
Check Stock

HVDI Stainless Steel Gas Can, Safety Portable Emergency Gasoline Diesel Can Tank, Backup Thickened Tight Sealed Gas Tank with 3 Handles, Vent and Flexible Spout Kit for Vehicles, Cars, Trucks(5Gallon)

  • ✔【304 High-quality Stainless Steel】The gas can is made of high-quality 304 stainless steel with a thickness of 0.9mm. It is resistant to pressure, high temperature, corrosion, and will never rust. Compared with plastic, stainless steel gasoline tanks are not prone to static electricity, and are safer..
  • ✔【Seamless Butt Welding】The gear-shaped stainless steel cover is equipped with a sealing ring to ensure high sealing performance. The tank body adopts seamless butt welding to make it stronger and never leaks..
  • ✔【Portable Flexible Spout Kit】The built-in filter effectively removes impurities, and you can choose either built-in or external oil guide tube, so you don’t have to worry about losing it..
  • ✔【Humanized Design】The gas tank has 3 handles, which support two people to lift. the stainless steel air release valve can balance the internal and external air pressure, and the oil outlet is expanded to 5cm for quick oil output..
  • ✔【Wide Use and Worry-Free Vouchsafing】This gasoline tank is suitable for various liquids such as gasoline, diesel, gasoline, water, etc. If you want higher quality, easier and more comfortable products, please choose us. Customer Satisfaction is our top priority. Please contact us if you need any assista....
Check Stock

VORILES klr650 accessories Motorcycle Radiator Guard For KLR 650 klr650 KLR650 2022 Water Tank Guard

  • Process: Butt welding stamping (without any welding marks).
  • Installation Difficulty: The installation is simple and can be completed in ten minutes..
Check Stock

Butt Welding Clamps, Sturdy Durable 16pcs Butt Welding Clamps ,for Sheet Metal Auto Car Truck Door Skin Panel, for Precision Butt Welding and Edge to Edge Welding(16pcs)

  • High-quality and durable:This set of clips has excellent performance in precision butt welding and edge-to-edge welding. The butt welding tongs are made of galvanized steel, rust-proof, heat-resistant and durable. The smooth metal surface prevents rust, is not easy to deform, and has a long service life..
  • Professional welding clamp tools:Each welding square tool tube clamp can extend the clamp block, leaving a 0.040 inch (1cm) gap between the panel and the edge welding. Suitable for straight or curved plates. The minimum gap of the welding plate is about 1 mm, which can be adjusted to a farther position as needed..
  • Good performance: These clips can be completely fixed before butt welding, leaving only a small gap to make the weld completely penetrate. This is an ideal choice for professionals engaged in sheet metal body repair..
  • Professional use:Sheet metal welding tongs are designed for welding operations. Very suitable for welding cracked metal floors, automotive sheet metal surfaces, door skins or prefabricated panels assembled in re-skinning projects. These clips can fix panels of any shape anywhere..
  • Easy to use:After spot welding the two panels together, remove the wing nut release device and toggle, just remove the fixture from the work befor....
Check Stock

Industrial Spot Welding Pen, Battery Spot Welding Pen Handheld Weld Machine Accessory for Industrial Spot Welding

  • The appearance is clean, and the heat dissipation is fast. It is suitable for assembling battery packs. Brass bars are cleaned and protected by strong acid to ensure the brightness of the brass bars..
  • Not happen that the common one‑piece spot welding pen cannot attain the pressure balance of the two welding needles, resulting in weak welding, large sparks and low work efficiency..
  • The handle has double springs to expand and contract, and each soldering pen is independently expandable, with moderate force control..
  • This 18650 battery spot welding pen, suitable for long‑term work, improve work efficiency, made of thick brass bar..
  • The spot welder pen comes standard with a pair of Japanese concentric ball‑point needles, which is effective..
Check Stock

Battery Spot Welding Pen, Handheld Spot Welder Pen Weld Machine Accessory Handheld for Industrial Spot Welding

  • This 18650 battery spot welding pen, suitable for long‑term work, improve work efficiency, made of thick brass bar..
  • The spot welder pen comes standard with a pair of Japanese concentric ball‑point needles, which is effective..
  • The handle has double springs to expand and contract, and each soldering pen is independently expandable, with moderate force control..
  • Not happen that the common one‑piece spot welding pen cannot attain the pressure balance of the two welding needles, resulting in weak welding, large sparks and low work efficiency..
  • The appearance is clean, and the heat dissipation is fast. It is suitable for assembling battery packs. Brass bars are cleaned and protected by strong acid to ensure the brightness of the brass bars..
Check Stock

LTI 2.75 inch Butt Joint Exhaust Band Clamp 304 Stainless Steel for 2.75 OD to 2.75 OD Exhaust Pipe Connection 2.75 Inch

  • LTI 3" Length exhaust clamp is Made in Full 304 Stainless Steel Over 100 hours salt spray test to ensure the great performance in anti-corrosion.
  • Universal fitment Butt Joins 2.75" OD Pipe to 2.75" OD Pipe, we also provide many different sizes to fulfill your needs. Full clamping area to create....
  • The butt joint clamps are best when cosmetic appearance is important, and have a wide range used. This would include exhaust tips, mufflers, cat back....
  • No welding design makes lap joint clamp fast, easy and accurate installation. it is removable and reusable, easy to install without welding.
  • LTI provide 12 months warranty from the date of purchased. We value your shopping experience and strive to offer a high-quality product and service.....
Check Stock

Battery Spot Welding Pen, Handheld Spot Welder Pen Brass Automatic Trigger Handheld Weld Machine Accessory for Industrial Spot Welding

  • The spot welder pen comes standard with a pair of Japanese concentric ball‑point needles, which is effective..
  • This 18650 battery spot welding pen, suitable for long‑term work, improve work efficiency, made of thick brass bar..
  • The handle has double springs to expand and contract, and each soldering pen is independently expandable, with moderate force control..
  • Not happen that the common one‑piece spot welding pen cannot attain the pressure balance of the two welding needles, resulting in weak welding, large sparks and low work efficiency..
  • The appearance is clean, and the heat dissipation is fast. It is suitable for assembling battery packs. Brass bars are cleaned and protected by strong acid to ensure the brightness of the brass bars..
Check Stock

PSCCO 4PCS Butt Welding Clamps Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

  • A set of 4 Intergrips firmly fix the flat or curved panel edge-to-edge and surface-to-surface to achieve a good clean connection..
  • The welding clamp is made of galvanized steel, which can prevent rust and is easy to install or disassemble..
  • Butt welding tongs can fix workpieces for precise butt welding and side-to-side welding..
  • A large number of fixtures suitable for any welding kit. The gap between the board and the board is maintained at 0.40 inches for edge-to-edge welding..
Check Stock

Heayzoki Battery Spot Welding Pen Handheld Automatic Trigger Spot Welding Tool DC 4-12V Suitable for longterm Work, Improve Work Efficiency

  • The appearance is clean, and the heat dissipation is fast. It is suitable for assembling battery packs. Brass bars are cleaned and protected by strong acid to ensure the brightness of the brass bars..
  • This 18650 battery spot welding pen, suitable for longterm work, improve work efficiency, made of thick brass bar..
  • Not happen that the common onepiece spot welding pen cannot attain the pressure balance of the two welding needles, resulting in weak welding, large sparks and low work efficiency..
  • The handle has double springs to expand and contract, and each soldering pen is independently expandable, with moderate force control..
  • The spot welder pen comes standard with a pair of Japanese concentric ballpoint needles, which is effective..
Check Stock