Categories

Best Stainless Ferrule

QiiMii Sanitary Fitting Reducer Fitting SS304 Tri Clamp Ferrule Style 3\ Tube OD to 2\ Tube OD (3 INCH X 2 INCH )

  • Ferrule Size(76MM end):91mm ferrule fits 3" tri clamp.
  • Ferrule Size(51MM end):64mm ferrule fits 2" tri clamp.
  • Concentric reducer fitting to connect two pipes of different diameters that are along the same pipe axis.
  • Fitting clamps to tubing on both ends for a non-permanent seal, providing take-down access.
  • Made of Stainless steel SS304,there for resistance to corrosion and high temperatures.
Check Stock

Cuetec Cynergy CT-15K Carbon Shaft (3/8x10)

  • [Low Deflection Cue Carbon Fiber Shaft]This carbon fiber shaft is filled with a customized foam inside which allows for less deflection on shots with a lot of spin, and it performs consistently and accurately,it is suitable for most professional players.
  • [High Stiffness]The carbon fiber material features with high stiffness and tensile strength,so the carbon fiber shafts are dent,warp,and scratch-resistant.
  • [10.5mm/11.8mm/12.5mm Tip Size]There are all premium multi-layered leather tips,the difference is in the ferrule,10.5mm with stainless steel ferrule,but 11.8mm/12.5mm with XTC ferrule.
  • [3/8×8 Joint]3/8×8 stainless steel joint connects the shaft and the butt together tightly,it provides a sustainable and smooth energy transfer.
  • [Weight Adjustable] You can add or subtract the specially made bolts to add or subtract weight,so you can get a carbon fiber cue which the weight you are satisfied..
Check Stock

Parker A-Lok 8NU8-316 316 Stainless Steel Compression Tube Fitting, Nut, 1/2\ Tube OD

  • Nut tightens and provides compression on the ferrule of a flareless fitting.
  • Chemically hardened type 316 stainless steel for higher strength and greater corrosion resistance than untreated stainless steel.
  • For use with a twin ferrule compression fitting set for a leak-resistant seal in high-pressure applications.
Check Stock

Good Sealing Compression Ferrule Connector Tee Effective Sealing Tee Equal Diameter 316 for Natural Gas for Complicated Pipeline for Solar Energy(Ф6)

  • DN15 Double ferrule bulkhead connector thread specification is ф1/2 ,external thread size is 20.3mm/0.8in,internal thread size is 19.5mm / 0.8in and the error is 19.5mm/0.8in..
  • Double ferrule bulkhead connector adopts double ferrule type installation,reusable,simple and convenient operation, and can be removed freely.No welding is needed, which is good for fire prevention, crack prevention, high‑altitude operation and can eliminate the disadvantages caused by inadvertent welding..
  • DN15 Double ferrule bulkhead connector has strong connection, high pressure resistance, tightness and repeatable installation, the installation and maintenance are simple and convenient, and the work is safe and reliable..
  • DN15 Double ferrule bulkhead connector selected high‑quality stainless steel 316 materials,the surface of the connector is finely ground by a special process, slick and delicate, the interior is clean and bright, and the tolerance control is accurate..
  • The manufacturing and production of the products follow strict product quality control standards, the product performance is stable, and the quality is reliable. You can use it for a long time with confidence..
Check Stock

DN15 Removed Freely Stainless Steel Double Ferrule Bulkhead Connector 20.3mm/0.8in External Thread 19.5mm/0.8in Internal Thread(Ф1/2)

  • DN15 Double ferrule bulkhead connector thread specification is ф1/2 ,external thread size is 20.3mm/0.8in,internal thread size is 19.5mm / 0.8in and the error is 19.5mm/0.8in..
  • Double ferrule bulkhead connector adopts double ferrule type installation,reusable,simple and convenient operation, and can be removed freely.No welding is needed, which is good for fire prevention, crack prevention, high‑altitude operation and can eliminate the disadvantages caused by inadvertent welding..
  • DN15 Double ferrule bulkhead connector has strong connection, high pressure resistance, tightness and repeatable installation, the installation and maintenance are simple and convenient, and the work is safe and reliable..
  • DN15 Double ferrule bulkhead connector selected high‑quality stainless steel 316 materials,the surface of the connector is finely ground by a special process, slick and delicate, the interior is clean and bright, and the tolerance control is accurate..
  • The manufacturing and production of the products follow strict product quality control standards, the product performance is stable, and the quality is reliable. You can use it for a long time with confidence..
Check Stock

Muzzy 225-X Bowhunting 100 Grain 3 Blade Crossbow Broadhead 1 3/16\ Cuttting Diameter, 6 Pack

  • BONE CRUSHING PENETRATION – Hardened steel Trocar tip provides maximum penetration and enhanced flight stability.
  • 100 GRAIN BROADHEADS - 3 Blade Crossbow Broadhead - 6 Pack - Also available in 125 grain.
  • LARGER DIAMETER FERRULE - Blades interlock in aluminum ferrule to match crossbow bolt for improved penetration and flight.
  • STAINLESS STEEL - Vented .020'' stainless steel blades with 1-3/16" Cutting Diameter.
  • MADE IN THE USA -Founded in 1984, Muzzy is the number one name in fixed-blade broadheads, and proudly made in the USA..
Check Stock

Rage Extreme & Hypodermic Shock Collars Part # 8536 UPC# 853616003749

  • PRECISION - Rage broadheads are known for their accuracy and their wound channels are legendary.
  • PENETRATION - the swept back blade design reduces friction with increases penetration. Ideal for larger game animals or for lower poundage bow setups needing maximum penetration.
  • AERODYNAMIC FERRULE - One-piece aerodynamic stainless steel ferrule and exclusive Hybrid Tip have Razor sharp .035" stainless steel blades and 1.5" Cutting diameter.
  • SHOCK COLLAR BLADE RETENTION SYSTEM - Ensures that the blades stay in place until they hit their target but allow the blades to deploy with absolute reliability.
  • RAGE - Leading the Evolution in Mechanical Broadheads. Replacement Blades R39805 (not included) Made in the USA.
Check Stock

Rage Hypodermic 2-Blade Crossbow NC Broadhead, 100 Grain, Silver, 3 Count

  • PRECISION – Rage leads the evolution in Mechanical Broad heads. These broad heads are known for their accuracy and their wound channels are legendary..
  • FEATURES - Aerodynamic one-piece steel ferrule, built with bone crushing power and increased penetration, razor sharp .035" stainless steel blades, 2" cutting diameter.
  • TECHNOLOGY - Hybrid Hypodermic Tip with Machined Stainless Steel Ferrule Technology that promotes aerodynamic flight..
  • BANG FOR YOUR BUCK - Your purchase includes 3 - 100 Grain broadheads so you never have to worry if you lose one. Recommended Practice head R39609 (not included).
  • MADE IN THE USA - At Rage, we are proud that all of broadheads are made right here in the USA..
Check Stock

RoadPro RP-550 30 Inch Ring Tunable Stainless Steel CB Antenna

  • Stainless Steel Whip With Chrome Plated Brass 3/8" X 24 Thread Ferrule.
  • Chrome plated brass 3/8-inch x 24 thread ferrule.
Check Stock

Hypodermic Trypan Crossbow Arrow Archery Titanium 100 Grain Broadhead - 3 Pack

  • TITANIUM FERRULE - 100-grain Rage Hypodermic Trypan Crossbow features a needle-like, streamlined titanium ferrule and 2-inch cutting diameter, that creates an oversized slap-cut entry hole.
  • HYBRID CHISEL TIP - .039 inch thick razor-sharp stainless-steel blades slide into a sweptback blade-angle configuration. The blades deploy to a monstrous 2-inch cutting diameter, however the broadhead has just a 3/4-inch diameter profile in-flight.
  • SHOCK COLLAR - The red polymer Trypan-specific SHOCK Collars provide exceptional blade retention and consistent, reliable blade deployment.
  • ACCURACY - The one-time use SHOCK Collars are indexed to notches in the Trypan’s titanium ferrule, so they can never be put on incorrectly and each package includes an additional 3 high-energy shock collars.
  • RAGE - Leading the Evolution in Mechanical Broadheads. Made in the USA.
Check Stock

RAGE Hypodermic +P 2 Blade Broadhead 125 Grain with Shock Collar Technology - 3 Pack Silver 39900

  • PRECISION - Rage broadheads are known for their accuracy and their wound channels are legendary.
  • PENETRATION - the swept back blade design reduces friction with increases penetration. Ideal for larger game animals or for lower poundage bow setups....
  • AERODYNAMIC FERRULE - One-piece aerodynamic stainless steel ferrule and exclusive Hybrid Tip have Razor sharp .035" stainless steel blades and 1.5"....
  • SHOCK COLLAR BLADE RETENTION SYSTEM - Ensures that the blades stay in place until they hit their target but allow the blades to deploy with absolute....
  • RAGE - Leading the Evolution in Mechanical Broadheads. Replacement Blades R39805 (not included) Made in the USA.
Check Stock

CUEDESG Carbon Fiber Pool Cue Stick 10.5mm/11.8mm/12.5mm,Low Deflection Pool Stick,Professional Cue Stick with Case… (Black_Linen Wrap_10.5mm)

  • [Low Deflection Cue Carbon Fiber Shaft]This carbon fiber shaft is filled with a customized foam inside which allows for less deflection on shots with a lot of spin, and it performs consistently and accurately,it is suitable for most professional players.
  • [High Stiffness]The carbon fiber material features with high stiffness and tensile strength,so the carbon fiber shafts are dent,warp,and scratch-resistant.
  • [10.5mm/11.8mm/12.5mm Tip Size]There are all premium multi-layered leather tips,the difference is in the ferrule,10.5mm with stainless steel ferrule,but 11.8mm/12.5mm with XTC ferrule.
  • [3/8×8 Joint]3/8×8 stainless steel joint connects the shaft and the butt together tightly,it provides a sustainable and smooth energy transfer.
  • [Weight Adjustable] You can add or subtract the specially made bolts to add or subtract weight,so you can get a carbon fiber cue which the weight you are satisfied..
Check Stock

Glarks Up To 2.2mm Wire Rope Crimping Tool With 150Pcs 3 Size Aluminum Double Barrel Ferrule Crimping Loop Sleeve Kit

  • 1. Product Type: High precision wire rope crimping tool with Aluminum double barrel ferrule crimping loop sleeve kit.
  • 2. Product Material: Crimping tool was made of heavy duty stainless steel, hard and sturdy.
  • 3. Package Include: 3 Size 150Pcs double barrel ferrule with a crimping tool in a Square paper box.
  • 4. Product Feature: Crimping tool With non-slip grips and self locking mechanism design makes it more relax to provide optimum pressure.
  • 5. Application: Crimping tool coordinate with barrel ferrule can be widely used for wire rope, cable line dog leashes and etc.
Check Stock