Best Stainless Hose Clamp
DIY Your Odd Sizes Band Hose Clamp Assortment Kit 14 FT Straps with 10 Fasteners Large Long Adjustable Worm Gear Screw Hose Clamps Stainless Steel Duct Clamp Pipe Clamp Metal Strapping
- Cost-effective: This stainless steel hose clamps assortment is a home improvement items you can make any sizes of metal clamps and save more from the price of pre-made worm drive hose clamps..
- Quality Fasteners: Our band clamps will not be easily bent and stripped out when tightening. The min.ultimate torque is 58 lbf-in. The hex size of screw clamp is 5/16 inch..
- All 304 SS: The 1/2" wide metal straps and 10 worm clamp fasteners are all made of real 304 stainless steel which are anti-corrosive, reusable and ideal for outdoor use. The screw is 304 stainless too, not carbon steel..
- Easy To Use: Following the directions included, you will set up the adjustable clamp very fast. Connect the metal strap with hose clamp fasteners, get large hose clamp 10 inch 12 inch 14 inch 16 inch 18 inch 20 inch 24 inch 30 & 40 inch extra large!.
- Widely Used: Our stainless hose clamp assortment set can diy hose clamps in min.2.5 inch and max.53 inch diameter for any pipe clamp duct clamp plumbing, metal strapping banding for round posts, segmented wood, muffler heat shield. It work better than long metal zip ties as it's easy to release and reusable for more projects!.
Check StockabcGoodefg 4 Sets Brass Garden Hose Mender Female and Male Hose Connector 5/8 Hose Fittings Garden Hose Adapter Water Hose End Replacement Repair Kit with Clamp and Rubber Gaskets
- Standard 5/8″ hose connection — The brass garden hose mender’s diameter is approx. 14mm/ 0.56 inch, fit for 5/8 inch hose for easily insert and remove hoses, please select the corresponding size before placing an order. Brass connector with the stainless tightening clamp you can make it tightly as you want. Work with your garden hose, sprayers, nozzle, etc..
- Wide applications — This hose end replacement kit can be use to garden hose mender, end hoses male mender, end hoses female mender, hose repair mender. You can use them to repair or replace broken female or male hose connector, connect to male or female quick connector to lengthen the hose, use with water faucet, etc..
- Easy to Use — This garden hose adapter use to repair and connect the water hose end. Easy to connect and disconnect when replacing the end of the garden hose, quick and easy, no additional tools are required, just by hand, suitable for using with garden hose, pipe tubing, and water equipment system, hose repair mender, etc..
- Sturdy material — These hose fittings are made of brass, which is rustproof, corrosion resistance and durable, and the stainless steel hoop clamp can avoid garden hose leakage..
- Packge Included — 4 Male Mender + 4 Female Me....
Check Stock304 Stainless Steel Hose Clamp Assortment Kit DIY Cut-To-Fit 12 FT Metal Strap + 8 Stronger Fasteners Large Adjustable Worm Gear Band Hose Clamps Screw Clamps Duct Pipe Metal Clamp Strapping
- ...ons. 30 seconds to 1 minute fast setup! If you do not have a snip on hand, DON'T WORRY! Please use a plier to bend the metal hose clamp strap back and forth, it will be cut easily. A nut driver for our screw clamp with 5/16'' hex head is available..
- Cost Effective: No longer need to stock different sizes of pre-made stainless hose clamps. It is more flexible to make hose clamp large as 14 inch 16 inch 18 inch 20 inch 24 inch 30 inch 40 inch! The standby materials come in handy for future projects!.
- Hose Clamps Stainless Steel: 12 FT strap and 8 PCS fasteners are all made of high quality 304 stainless steel, NOT 201 SS. These worm gear clamps will last forever, reusable, anti-rust and anti-corrosive, very suitable for outdoor use!.
- No Jamming No Slipping Fasteners: The steel sheet of our hose clamp fasteners is thicker! It keeps the stainless strapping strong and heavy duty. The screw grips the strap band tightly so that the band clamp can be tightened! The worm drive clamp is very smooth, no need to apply hard pressure!.
Check Stock3 Sets 5/8 Inch Brass Garden Hose Repair Kit Mender End Water Hose End Mender Female and Male Hose Connector with 6 Pieces Stainless Steel Clamp
- About size: the brass garden hose mender’s diameter is approx. 15.0 mm/ 0.59 inch, fit for 5/8 inch hose for easily insert and remove hoses, please select the corresponding size before purchasing.
- Material: the materials of hose mender and clamp are rustproof and solid, you can use them for a long time, the hose mender is made of quality brass, the clamp is made of stainless steel.
- Simple installation: you just need to install these garden hose end replacement by hands, no complicated process, using the stainless steel clamp with hose mender can effectively avoid leakage.
- Widely applying: these garden hose end replacement are suitable for using with water faucet, sprayers, garden hose and so on as long as the size matches, helping you solve some problems about repair.
- Package information: come with 3 sets brass garden hose mender and 6 pieces stainless steel tightening clamp for you to use or replace, it’s good choice for your backup tool of hose mender.
Check StockTwo Little Fishies ATL5410W 6-Piece Plastic Hose Clamp Set, 3/4-Inch
- WHAT YOU WILL GET? – The hose clamp kit comes with totally 40 pcs hose clamps with 7 size range, enough for your spare and replacement in daily life around you house, garage, lawn and garden.
- DURABLE 304 STAINLESS STEEL –The hose clips are made of high quality and premium heavy duty 304 stainless steel material that are more salt resistant, anti-rust, anti-corrosion, water proof, oil proof than other 201 stainless steel. Solid and sturdy material ensure the adjustable hose clamps last a long time for use.
- NICE ASSORTMENT SIZES – The stainless clamps include 7 different diameters steel hose clamps to adapt to different hoses: 6-12mm, 10-16mm, 13-19mm, 16-25mm, 19-29mm, 18-32mm, 21-38mm. The Clamp kit are flexible and ductile with wide adjustable size range from 6 to 38mm/0.24-1.5 inches.
- EASY TO INSTALLL AND REUSABLE – The hose clamp designed with a worm gear mechanism to adjust the clamp’s diameter to precisely apply sealing pressure. It attaches hoses for fitting hoses in confined spaces to prevent flow leakage. These clamps also can be recycled and reused due to the 304 stainless steel material which makes them worked last for long.
- WIDELY USED – The pipe tube clamps are used in securing hoses, pipe, cable, tube, fuel lines etc. Perfec....
Check StockSelizo 40Pcs Hose Clamp Including 7 Sizes Adjustable Pipe Tube Clamps 304 Stainless Steel Hose Clips
- WHAT YOU WILL GET? – The hose clamp kit comes with totally 40 pcs hose clamps with 7 size range, enough for your spare and replacement in daily life around you house, garage, lawn and garden.
- DURABLE 304 STAINLESS STEEL –The hose clips are made of high quality and premium heavy duty 304 stainless steel material that are more salt resistant, anti-rust, anti-corrosion, water proof, oil proof than other 201 stainless steel. Solid and sturdy material ensure the adjustable hose clamps last a long time for use.
- NICE ASSORTMENT SIZES – The stainless clamps include 7 different diameters steel hose clamps to adapt to different hoses: 6-12mm, 10-16mm, 13-19mm, 16-25mm, 19-29mm, 18-32mm, 21-38mm. The Clamp kit are flexible and ductile with wide adjustable size range from 6 to 38mm/0.24-1.5 inches.
- EASY TO INSTALLL AND REUSABLE – The hose clamp designed with a worm gear mechanism to adjust the clamp’s diameter to precisely apply sealing pressure. It attaches hoses for fitting hoses in confined spaces to prevent flow leakage. These clamps also can be recycled and reused due to the 304 stainless steel material which makes them worked last for long.
- WIDELY USED – The pipe tube clamps are used in securing hoses, pipe, cable, tube, fuel lines etc. Perfec....
Check StockHose Clamps 304 Stainless Steel Single Ear Hose Clamp, 125Pcs (7-25.6mm) Crimp Pipe Clamps Assortment Kit 9 Sizes Ear Stepless Cinch Rings Crimp Pinch Fitting Tools (125Pcs with Pliers)
- HIGH QUALITY- The single ear hose clamp is made of premium raw material 304 stainless steel and has good corrosion resistance, heat resistance, low temperature strength and mechanical properties. The hose clamp stainless steel 304 has good workability such as stamping and bending, and no heat treatment hardening phenomenon. This crimp clamp can be used for a long time..
- 360° STEPLESS DESIGN- No bulge and gap in the inner ring of the stainless steel hose clamps. Narrow band design provides more concentrated sealing pressure. The special treatment of the edge of the clamp reduces the possibility of damage to the clamped parts. This ear clamp is light weight and obvious clamping effect..
- WIDELY USED- Standard series of spring clamps are suitable for connection of pipe fittings.
- Using hose clamp pliers can perfectly connect the pipe to the any brand of crimp pipe fittings or tubing..
- SHARP PLIERS- The small head design allows for good access in a limited area without damaging the pressure points on the ear clamp. The hose clamp plier is sharp but won't damage, rubber handle grips for a sure hold the clamp. Great length on handles, strong and well built..
- ONE-STOP SERVICE- High-quality, high stability. If you have any issues at all with this product, our cus....
Check StockHoses Clamps Clamps Worm Worm Clamps Stainless Steel Large Hose Clamp Worm Drive Hose Clamps Adjustable Pipe Hose Clamp for Intercooler Pipe Plumbing Tube and Fuel Line 9 Pieces,11.5 Feet
- DIY hose clamp: you can trim the hose clamp strap in length you want easily, then insert the fastener to make a suitable size you want, no more waste any materials.
- You will get 1 piece adjustable hose clamp and 8 pieces fasteners, enough quantity to meet your different needs.
- Longer hose clamp: the stainless steel duct clamp strap's total length is 11.5 feet, suitable to cut and get your long large hose clamp in different sizes, such as 12 inch, 14 inch, 16 inch and so on, the max size is 43 inch.
- Durable material: the hose clamp and fasteners are made of quality 304 stainless steel, rust-proof, water-proof, corrosion-resistant, strong, durable and long lasting use, which can be applied in outdoor and coastal areas.
- Powerful function: adopts the open structure of inner and outer ring and the bolt is fastened, the worm drive pipe clamp is torsion-resistant, pressure-resistant, tightly locked and with large adjustment range, provides sealing performance and helps to solve the problem of liquid gas leakage.
- Easy to use: you just need to loosen or tighten the screw of the hose clip by a screwdriver to adjust the size, attach the hose to the fitting tightly, and it can be applied to secure hoses, pipes, cable, tubes, etc..
Check Stock4 Inch Key Hose Clamp 12packs Key-Type Adjustable Stainless Steel Hose Clamps, dust collection hose clamps, air hose clamps, Pipe Clamp, Worm Gear Clamps, Dryer Vent Clamp, Thumb Screw Metal Clamps
- Hose clamps stainless steel made of 201 stainless steel, constructed to resist scaling and corrosion and ensure long- term use..
- These stainless steel hose clamps are used to lock the hose tightly with a view to preventing flow leakage. This hose clamp assortment kit can be applied for securing hose, cable, pipe, tube, fuel lines in domestic applications, automotive, boat, industrial and so on..
- Dust collection hose clamps can be simply loosened or tightened by using the adjustable handle without any other tools..
- Each package consists of 12 pack 4-inch hose clamp, the size of each clamp is about 3 1/2 inch (90 mm)- 4 3/8 inch (110mm) (DIAMETER).
- Customer satisfaction is our utmost priority. If you are dissatisfied with 4-inch hose clamp, drop us a message and we are certain to give you a full refund..
Check Stock5/8' Aluminium Garden Hose Repair Connector with Stainless Steel Clamps, Male and Female Garden Hose Fittings, Mender End Repair Kit,Water Hose End Mender,Fit for 5/8' Garden Water Hose Fitting, 4 Set
- Garden Hose Repair Connector:4 sets female and male hose repair connector with clamp, 8pcs Stainless steel clamp,8 extra Garden Hose Washer Rubbers.Fit for 5/8" hose fittings.Pipe joint diameter is 16-16.5mm, Standard 5/8" hose inner diameter is about 15.8-17mm, Our product is a little smaller than stand size which make it easy to insert or pull out 5/8" hose.with the stainless tightening clamp you can make it tightly as you want..
- Aluminium Garden Hose Mender End Repair Kit : Female and male hose repair connectors are made of high quality aluminum, he surface oxidized to copper-like color,the clamps are made of stainless steel.Heavy-duty Aluminum metal construction with rust proof,Please note our connector are made of Aluminum , not brass.Our product Completely lead-free..
- Easy to use : Easy to connect and disconnect, use to repair and connect the water hose end.Easy to install these garden hose end replacement by hands, 8 pieces stainless steel tightening clamp with rust proof for you to use or replace, effectively avoid leakage, it's good choice for your backup tool of hose mender..
- Widely Application: These garden hose end replacement has a wide range of applications such as outdoor faucet, garden hose, hose splitter, filter, sprayer, sprinkle....
Check Stock2 1/2 Inch Key Hose Clamp 12pack Key-Type Adjustable Stainless Steel Hose Clamps, dust collection hose clamps, air hose clamps, Pipe Clamp, Worm Gear Clamps, Dryer Vent Clamp, Thumb Screw Metal Clamps
- Hose clamps stainless steel made of 201 stainless steel, constructed to resist scaling and corrosion and ensure long- term use..
- These stainless steel hose clamps are used to lock the hose tightly with a view to preventing flow leakage. This hose clamp assortment kit can be applied for securing hose, cable, pipe, tube, fuel lines in domestic applications, automotive, boat, industrial and so on..
- Dust collection hose clamps can be simply loosened or tightened by using the adjustable handle without any other tools..
- Each package consists of 12 pack 2 1/2 Inch hose clamp, the size of each clamp is about 2 inch (50 mm)- 2 3/4 inch (70mm) (DIAMETER).
- Customer satisfaction is our utmost priority. If you are dissatisfied with 2 1/2 Inch hose clamp, drop us a message and we are certain to give you a full refund..
Check StockGLIDESTORE 4-Inch Key Hose Clamp Key-Type Adjustable Stainless Steel Hose Clamps Pipe Clamp Worm Gear Clamps Dryer Vent Clamp Thumb Screw Metal Clamps Pack of 10 Easy Turn Clamp 4 - Inch
- ✔ HIGH-END MATERIAL: Hose clamps stainless steel made of stainless steel, constructed to resist scaling and corrosion and ensure long- term use..
- ✔ AMAZING FUNCTION: These dryer vent clamp are used to lock the hose tightly with a view to preventing flow leakage. This hose clamp assortment kit can be applied for securing hose, cable, pipe, tube, fuel lines in domestic applications, automotive, boat, industrial and so on..
- ✔ EASY TO USE: Can be simply loosened or tightened by using the adjustable handle without any other tools..
- ✔ HUGE QUANTILY, SMALL COST: Each package consists of 10 pack 4-inch hose clamp (Easy Turn Clamp), the size of each clamp is about 4 inch (DIAMETER).
- ✔ 100% MONEY BACK GUARANTEE: Customer satisfaction is our utmost priority. If you are dissatisfied with 4 hose clamp, drop us a message and we are certain to give you a full refund..
Check StockAKIHISA T-Bolt Hose Clamps,304 Stainless Steel Heavy Duty Adjustable Tube Clamps (23-25mm 4pack)
- the screw bolt M6*40mm. to save you time, please carefully check and measure your hose OD to fit working range before purchasing our products..
- [Premium Material] T bolt hose clamp (including the band, housing and screw) is made of high quality stainless steel-304 with fine polishing treatment, salt resistant, anti rust, anti-corrosion, waterproof, oil-proof, resistant to acid, heat and cold. Makes it more durable, wear - resistant and secure ducting tightly..
- [Flanging Design] Stainless steel t-bolt clamp is designed to provide a leak-free connection, round arc flanging process of steel belt edge, it could prevent the sharp edges from cutting the pipeline, can protect your tubes better..
- [Easy to Install] Removable installation, silicone hose clamps can be installed without disconnecting the pipe. High hardness and it is not easy to deform, stainless steel screws, large torque..
- [Wide Applications] high pressure hose clamp can be used in a wide variety applications of industrial, automotive and special equipment. Fit for fastening various oil, water, g....
Check Stock