Categories

Best Stainless Pipe Bend

WINNERWELL Stainless Steel Bend Pipe for Woodlander Deluxe Stove

  • Stainless steel 90 degree bend pipe for connecting pipes for Winnerwell Woodlander stove..
Check Stock

Squirrelly 3' Inch Stainless Steel Mandrel (2 Pack), High Quality 45 Degree Bends Angles Turbo Custom Exhaust System Fabrication Shops Piping

  • Squirrelly create high quality products and solutions with the same bootstrapped mentality upon which our company was founded. We are early adapters of new technology, utilizing cutting edge manufacturing processes to deliver a superior product..
  • Squirrelly 45 degree stainless steel mandrel bent pipe is designed and fabricated in MN, USA..
  • This 45 degree mandrel bent is made of 304 stainless steels 16-gauge raw finish..
  • The measurements for this stainless steel pipe is measure by 3″ inch diameter with the length of 5 1/2″ long..
  • Package includes: 2x 3″ Mandrel Bend 45 Degree 304 Stainless Steel Mandrel Bent Piping.
Check Stock

32 Pieces Bike Brake Noodle Cable Bicycle Cycling Brake Pipe with Rubber Boots for Mountain Bike Bicycle Accessories

  • Package includes: you will receive 8 sets of bike brake noodle cables, each set contains 1 piece 90 degree bend pipe, 1 piece 110 bend pipe and 2 pieces rubber boots, a total of 32 pieces, enough to meet your long-term using needs.
  • Good performance: these brake pipes with rubber boots will reduce the friction and resistance of the brake wire, so as to protects the brake wire for serving you a long range of time.
  • Durable material: our bicycle cycling brake pipes with rubber boots are made of sturdy stainless steel, aluminum alloy and durable rubber, which is not easy to damage in long-term friction, durable and reliable for you to use.
  • Wide range of application: these bike brake noodle cables can be applied for most types of bicycles and mountain bikes, provides you with nice using experience.
  • Easy to carry: our cycling brake pipe with rubber boots features lightweight characteristics, which makes it easy to carry and store.
Check Stock

Bravex Tubing Bender Pipe Tube Bender Kit Refrigeration Ratcheting Hand Tool 1/4 to 7/8 Inch with Tube Cutter/Deburring HVAC Tool Refrigeration System Maintenance

  • Suitable Tube Sizes: 1/4“, 5/16“, 3/8“, 1/2”, 5/8“, 3/4“, 7/8”, the maximum bending angle is 90 degrees, supports reverse bend. Bends pipes in both “forward” and “reverse” configurations..
  • The pipe bender is made of 40Cr steel & 45# steel with high precision machining. The aluminum alloy tube bender heads (replaceable) are firm and durable, preventing pipe deformation. The super long handle increases the leverage, making this tool both convenient and labor-saving..
  • Comes with pipe cutter, suitable for cutting heavy and hard materials, such as thin stainless steel (thickness.
  • Also includes a deburring tool made of solid plastic structure and high-speed steel bald head. It can quickly, cleanly and easily enlarge the inner diameter of different pipes (such as copper, aluminum, PVC and stainless steel pipes)..
  • If the pipe crack when bent,try heating and cooling to soften the pipe,and it will make perfect bends. Applications：automobile maintenance, refrigerator maintenance, Hvac work, hydraulic systems, etc..
Check Stock

VEVOR Tube Bender, 1/2 inch Pipe Bending Capacity 180 Degrees Manual Bending, for Aluminum and Stainless Steel Pipes in HVAC, Heating Pipe System

  • 1/2" Bending Capacity: The tube bender can quickly and smoothly bend 1 mm thickness tubes. And the tool is suitable for 1/2 inch (12.7 mm) pipe diameter. Made of high-strength steel material, it is a robust tool built to last..
  • Versatile Use: The pipe bender is suitable for copper, stainless steel pipes. Universal tubing bender is used in many fields, including construction sites, pluming jobs, heating and sanitary installations, garage and vehicle repair, home improvement..
  • 180° Bending Angle: The brake line bender can easily bend the pipes from 0 to 180 degrees. A clear scale mark makes the bending angle more accurate. Bending radius: 0.6 inch/14 mm..
  • Energy-Saving Structure: The steel brake bender adopts a 16 inch/40 cm handle with an ergonomic design for effortless operation. The handle can be reversed, thus tubes won’t be reformed. Compact design allows easy carrying, lightweight but gives enough bending force..
  • Easy to Operate: Our 1/2 inch pipe bender features easy and quick operation. First, open the tube bender, place a tube. Then align the zero mark before bending and slowly pull the shoe handle to the angle you want. Finally, you will get a bent pipe..
Check Stock

MacWork Tailpipe Cutter，Exhaust Tube Chain Cutter，Features Pipe Cutter Chain/Cutting Wheels，Black

  • CUT ON OR OFF THE VEHICLE: Get a clean cut with minimal rough edges or burrs on your exhaust pipe, tailpipe, and when installing or making repairs on catalytic converters.
  • Keep well oiled, not for use on stainless steel.
  • EFFECTIVELY CUT TAILPIPES: Work on tailpipes and exhaust pipes with diameters ranging from 3/4" to 3-1/4" (19-83 mm).
  • Lubricating the exhaust cutter cutting wheels before use will give an even smooth cutting operation and extends the life of the item.
  • EASY TO USE: Cut pipe with our pipe cutter tool in four easy steps.
  • Wrap chain around the pipe, hook the chain onto the plier jaw, close plier jaw until pipe cutter wheels are tight on the pipe, hand rotate chain around pipe until pipe is cut.
  • NO POWER TOOLS NEEDED: Breaking out the Sawzall or angle grinder is unnecessary with our exhaust cutter tool.
  • Work in cramped spaces with one-handed rotation.
  • The cushion grip handles ease pressure on your hand while you increase your grip.
  • BUILT TO LAST: This quality metal pipe cutter's cutting wheels won’t dull easily during use.
  • The head of the exhaust cutting tool won’t bend from during rotation.
  • Lightly lubricate cutting wheels before use.
Check Stock

Stainless 2.5" 90 Degree Mandrel Bend Elbow - 14GA/.078" Wall - 1.5" Leg - SS304 Stainless Steel Exhaust Elbow Piping for Car Exhaust Pipe Modified, Stair Handrail, etc - KOTVTM

  • 【Material】: SS304 Stainless Steel 90° Exhaust Pipe Elbow, Stainless steel elbows that are resistant to high temperatures, oxidation, and rust (can be welded to 2.5 inches outside diameter pipe) for car exhaust pipe modified, stair handrail, etc.
  • 【OD】: 2.5"/63mm, The outer diameter of the elbow is 2.5". Height（L): 5.51"/140mm.
  • 【Quantity】: Single Elbow. 100% brand new.
Check Stock

Theia technical Tips&Electrode Harbor Freight Titanium 45 Plasma cutter 56576 56811 56255 40Amp (30)

  • CUT ON OR OFF THE VEHICLE: Get a clean cut with minimal rough edges or burrs on your exhaust pipe, tailpipe, and when installing or making repairs on catalytic converters.
  • Keep well oiled, not for use on stainless steel.
  • EFFECTIVELY CUT TAILPIPES: Work on tailpipes and exhaust pipes with diameters ranging from 3/4" to 3-1/4" (19-83 mm).
  • Lubricating the exhaust cutter cutting wheels before use will give an even smooth cutting operation and extends the life of the item.
  • EASY TO USE: Cut pipe with our pipe cutter tool in four easy steps.
  • Wrap chain around the pipe, hook the chain onto the plier jaw, close plier jaw until pipe cutter wheels are tight on the pipe, hand rotate chain around pipe until pipe is cut.
  • NO POWER TOOLS NEEDED: Breaking out the Sawzall or angle grinder is unnecessary with our exhaust cutter tool.
  • Work in cramped spaces with one-handed rotation.
  • The cushion grip handles ease pressure on your hand while you increase your grip.
  • BUILT TO LAST: This quality metal pipe cutter's cutting wheels won’t dull easily during use.
Check Stock

KOTVTM Stainless Steel Elbow 2.5" 90° Mandrel Bend Elbow-Thickness 16GA/.065" Wall - SS304 Stainless Elbow Exhaust Tubing for Car Modified Exhaust Elbow Pipe, Stair Handrail,etc

  • 【Parameter】Stainless 2.5" Exhaust Pipe 90° Elbow, Diameter: 2.5", Bend Degree: 90°, Wall Thickness: 16GA /.065", Back arc length: 5.9 inch, (can be welded to 2.5" OD tube) Exhaust tubing.
  • 【Features】 Stainless 2.5" 90° Elbow Exhaust Pipe, Made of SS304 stainless steel, Durable: Not easily damaged, No rust, anti-oxidation, Mirror polishing.
  • 【Package】 90° degree elbow elbow exhaust pipes.
Check Stock

150 Pieces Christmas Pipe Cleaners Chenille Stem,50 White Craft Pipe Cleaners,50 Green Chenille Stems Pipe Cleaners, and 50 Red Pipe Cleaners for Arts and Crafts, Xmas Home Decoration

  • You will receive: White pipe cleaners 50 pieces, green pipe cleaners 50 pieces, and red pipe cleaners 50 pieces. Easy to bend and mold to create designs. Colorful, soft, and ideal for all craft projects..
  • High-quality materials: High-quality pipe cleaners are made of metal wire and fiber, bendable, flexible, easy to bend, twist, bend, or wrap into most shapes. Colorful and soft, and ideal for most craft items..
  • How to use: Pipe cleaners can be twisted into any shapes you like, such as animals, fruits, vegetables, and so on by your ideas. It is a good item for young people to release their imagination..
  • Innovative and unique: These colorful pipe cleaners are creating objects and a great gift for young people and adults who like to work with various artworks..
  • Great product: Mixed color pipe cleaners can be twisted into any shape you like. Pipe cleaners are widely used in kindergarten DIY courses and improve and develop young people intelligence and practical ability..
Check Stock

PVC Pipe Cutter, Cuts up to 2-1/2\

  • ...g during the cutting process to protect the user from the rebound of the blade..
  • 【Easy to operate】：The pipe cutter is made of rubber-textured handle, which is more comfortable to use, （When cutting PVC flexible pipe you should revolve the pipe whilst compressing）. In the bottom of pipe cutter, there have a stainless buckle. When you don't use it, you can buckle the safe lock..
Check Stock

100 Pieces Pipe Cleaners Chenille Stem Solid Color Pipe Cleaners Set for Pipe Cleaners DIY Arts Crafts Decorations Chenille Stems Pipe Cleaners Green

  • You will receive: Green pipe cleaners 100 pieces. Easy to bend and mold to create designs. Colorful, soft, and ideal for all craft projects..
  • High-quality materials: High-quality pipe cleaners are made of metal wire and fiber, bendable, flexible, easy to bend, twist, bend, or wrap into most shapes. Colorful and soft, and ideal for most craft items..
  • How to use: Pipe cleaners can be twisted into any shapes you like, such as animals, fruits, vegetables, and so on by your ideas. It is a good item for young people to release their imagination..
  • Innovative and unique: These colorful pipe cleaners are creating objects and a great gift for young people and adults who like to work with various artworks..
  • Great product: Mixed color pipe cleaners can be twisted into any shape you like. Pipe cleaners are widely used in kindergarten DIY courses and improve and develop young people intelligence and practical ability..
Check Stock

100 Pieces Pipe Cleaners Chenille Stem, Solid Color Pipe Cleaners Set for Pipe Cleaners DIY Arts Crafts Decorations, Chenille Stems Pipe Cleaners (Orange)

  • You will receive: Orange pipe cleaners 100 pieces. Easy to bend and mold to create designs. Colorful, soft, and ideal for all craft projects..
  • High-quality materials: High-quality pipe cleaners are made of metal wire and fiber, bendable, flexible, easy to bend, twist, bend, or wrap into most shapes. Colorful and soft, and ideal for most craft items..
  • How to use: Pipe cleaners can be twisted into any shapes you like, such as animals, fruits, vegetables, and so on by your ideas. It is a good item for young people to release their imagination..
  • Innovative and unique: These colorful pipe cleaners are creating objects and a great gift for young people and adults who like to work with various artworks..
  • Great product: Mixed color pipe cleaners can be twisted into any shape you like. Pipe cleaners are widely used in kindergarten DIY courses and improve and develop young people intelligence and practical ability..
Check Stock