Categories

Best Stainless Pipe Cap

HNHYNSY 1/8\ 1/4\ 3/8\ 1/2\ Female x Male Thread 90 Deg Brass Elbow Pipe Fitting Connector Coupler for Water Fuel Copper (Thread Specification : 1\)

  • Generally speaking, the raw material stainless steel is generally non-magnetic. However, due to a series of processes such as processing, smelting, and heat treatment, a small amount of martensite or ferrite structure will appear in austenitic 304 stainless steel. Therefore, 304 stainless steel will have weak magnetic properties..
  • This product is made of 304 stainless steel, which is hard and not afraid of high temperature and low temperature, which effectively prevents the phenomenon of pipe joints from cracking..
  • Built-in screw cap reinforcement to make the connection between the water pipe and the elbow more stable and not easy to break.
  • The inner wall of the water pipe is smooth, and the sealing is strong, which strengthens the stability of drainage and exhaust, and the resistance is reduced, the faster the conveying.
  • Suitable for water pipe transfer, natural gas gas transfer, sewage treatment water pipe transfer.
Check Stock

YOSHIMURA 146500D520 Race RS-4S Stainless Full System for 2012-2016 Kawasaki Ninja 650 / EX650, 146500D520

  • – Stainless Pentagonal-shaped sleeve w/ Carbon Fiber End Cap — Stainless Tail-pipe.
  • – Front muffler cap functions as a polyresonant chamber which helps reduce noise.
  • YOSHIMURA Race RS-4S Stainless Full System for 2012-2016 Ninja 650.
Check Stock

CHIMCARE Wind Directional Chimney Cap, Round Non Air Cooled 6' inch Stainless Steel Cap, Windproof, USA Made

  • PREVENT DOWNDRAFTS: The unique design of Non Air cooled stainless steel chimney cap is built to promote updraft and ensures that the wind does not go down your chimney flue causing a downdraft..
  • UNMATCHED PROTECTION: The stainless steel cap swivels to block the wind, prevents toxic smoke, twigs, leaves and other debris from entering your home and obstructing the chimney. Saving you money from costly repairs in the future..
  • PREMIUM QUALITY: Made in the USA with stainless steel, our Non air cooled wind directional chimney cap is a unique alternative to traditional chimney cap - providing resistance to corrosion, bad weather and other costly damaging elements.
  • EASY INSTALL: Slips inside the interior pipe. You will need to measure the inside dimension and this 6 inch chimney cap is ONLY MEANT FOR NON-AIR COOLED CHIMNEYS. Not sure? Ask us!.
  • MADE IN AMERICA: CHIMCARE Chimney Caps are made by our team of skilled craftsman, here in the USA with a LIFETIME WARRANTY..
Check Stock

Caltric Exhaust Pipe Gasket Compatible With Honda Trx450R Trx450Er 2004-2009 2012 2013 2014

  • End cap unbolt for easy canister repacking.
  • Includes a head pipe, mid pipe, and an exhaust canister.
  • Multi-step, stainless steel ATV exhaust system.
Check Stock

QMINOX 2 Inch × 1.5 Inch Sanitary Fitting End Cap Reducer Stainless Steel 304 Sanitary Concentric Reducer Tri Clamp Clover

  • End Cap Reducer Ferrule Size 64mm = 2 Inch Tri Clamp.
  • End Cap Reducer Ferrule Size 50.5mm = 1.5 Inch Tri Clamp.
  • Concentric End Cap Reducer Fitting to Connect 2 Pipes of Different Diameters That are Along The Same Pipe Axis.
  • Sanitary Fitting clamps to tubing on both ends for a non-permanent seal, providing take-down access.
  • Stainless Steel 304 Sanitary Fitting for Resistance to Corrosion and High Temperatures.
Check Stock

DERNORD Stainless Steel 304 Sanitary Fitting Clamp End Cap fits Tri-Clamp Ferrule Flange (3\ (76mm) Tube OD)

  • End cap for closing the end of a pipe or tube.
  • Clamp end connection for a non-permanent seal, providing access to lines.
  • Stainless Steel 304 for resistance to corrosion and high temperatures.
  • Maximum operating pressure rating of 250 psi at 70 degrees F ambient temperature.
  • Fits end pipe from Diameter 76mm, fits 3" Tri-clamp.
Check Stock

AA-Racks Universal Conduit Carrier Kit Fit 6' PVC Pipe, No Drilling Required, Black

  • Can be used on most Truck Racks / Van Racks / SUV Racks.
  • Cast Aluminum door and end cap, Stainless Steel saddle brackets U-bolts and hardware.
  • Spring loaded door latch and urethane gasket for weather resistance.
  • The end cap comes with the rotary tongue lock.
  • Required for Assembly: 6" pvc pipe (actual 6.625"), silicon or butyl sealant.
Check Stock

Dernord 2 Inch (OD64) Tri-clamp Ripple Heating Element Electric Water Heater 5500W 240V

  • Stainless Steel Tri-clover Clamp 2 Inch (OD64), fit 2″(51mm) pipe if that pipe has a 2″ flange for triclamp.
  • With SUS304 Materials Cap,easy to Install and fits Standard 2″ tri-clover coupler of American.
  • Nylon Cable Gland Joint Adjustable Locknut for PG21 Wire OD 12.5mm to 18mm.
  • SUS304 Tri-clamp Ripple Foldback heating element provides 5500w 240v of power.
  • Resists dry firing, lime deposits, and sand that would burn out ordinary elements.
Check Stock

DERNORD Sanitary End Cap fits Tri-Clamp Ferrule Flange Stainless Steel 304 Fitting Clamp (2\ (51mm) Tube OD) (2 Pack)

  • End cap for closing the end of a pipe or tube.
  • Clamp end connection for a non-permanent seal, providing access to lines.
  • Stainless Steel 304 for resistance to corrosion and high temperatures.
  • Maximum operating pressure rating of 250 psi at 70 degrees F ambient temperature.
  • Fits end pipe from Diameter 51 down to Diameter 45, fits 2" Tri-clamp.
Check Stock

Handmo 2 into 1 Exhaust for Harley Touring 1995-2016 Models, Baffled Exhaust Pipes for Harley-Chrome

  • YOSHIMURA RS-2 STAINLESS FULL SYSTEM W/ CARBON CAN & SS ENDCAP FOR 2017-2020 Kawasaki Z125 Pro, 14120AB251.
  • Weight: 2.9 lbs lighter than stock configuration.
  • Stainless steel header and tail-pipe with Carbon canister & Stainless steel cone end-cap.
  • ** PLEASE NOTE: THIS LISTING IS FOR THE EXHAUST ONLY....COMPLETE BIKE NOT FOR SALE....PHOTOS TO SHOW EXHAUST ON BIKE**.
Check Stock

Joyoldelf Portable Smoking Pipe Cleaning Tool – Stainless Steel 3-in-1 Scraper & Reamer, Bonus a Flannelette Pipe Pouch, Perfect for Scraping and Poking

  • Practical Pipe Cleaning Tool – This cleaning tool kit is common use to cleaning the pipe, such as hookahs, pipe, water pipe and shisha, etc. To offer your great smoking pipe experience..
  • Multiple Use 3-in-1 Pipe Scraper – Pipe scraper which is stainless steel material, including three parts, tamper, scraper, needle. Tamper use for loading of tobacco, tobacco flatten to help tobacco combustion, scraper use for scraping the inside of the pipe tobacco dust and soot, needle use for picking out soot for cleaning pipelines to prevent clogging..
  • Stainless Steel Pipe Reamer – Pipe reamer is well made of stainless steel material, perfect for reaming the bowl when cake becomes too thick, making scrape off some cake more evenly and more conveniently than normal blunt tool, to avoid affect the smoking taste..
  • Pipe Pouch – Bonus a flannelette pipe pouch, easy for storing pipe and pipe accessories, you can carry them go outside, very convenient, and can avoid missing some pipe tool and accessories..
  • Package and Joyoldelf Full Warranty – You’ll get 1 x Stainless Steel Pipe Reamer, 1 x Stainless Steel 3-in-1 Pipe Scraper, 1 x Pipe Pouch. We will offer you one year warranty and lifetime customer service, our warranties ensure you have a fantastic shopping exp....
Check Stock

Ham-Let Stainless Steel 316 Let-Lok Compression Fitting, Cap, 1/16\ Tube OD

  • Cap for closing the end of a pipe or fitting.
  • Fitting connects to tubing on its open end.
  • Type 316 stainless steel for higher strength and greater corrosion resistance than type 304 stainless steel.
  • Operating temperatures range from -100 to 1000 degrees F.
  • Meets ASTM standards A213 and A269 for quality assurance.
Check Stock

Cone Top Chimney Cap with Screen (6 Inch)

  • PERFORMANCE: This heavy-duty all-weather chimney cap is constructed from 28 gauge galvanized steel and is designed to keep rain and snow from getting down the chimney pipe. It includes a built-in 1/4" metal screen to complete the look and help keep out debris and animals..
  • FIT: The cap is designed to be mounted over single wall pipes and includes a fixed base. We recommend ordering the same size chimney cap as your pipe..
  • SIZES: This item is available in multiple sizes to accommodate different pipe diameters.
  • QUALITY: This product is manufactured in the USA and comes with a 1 year warranty against product defect and workmanship.
Check Stock