Best Stainless Pressure Tube

ZRDR Co2 Generator System 2L with Pressure Gauge Automatic Pressure Relief Valve Bubble Counter for Aquarium Plants，Stable Output Sent Steel Bottle Base

• Professional Factory - We are a manufacturer specializing in aquarium co2 systems. Our co2 generator for aquarium plants is made of 304 stainless steel, far better than a simple plastic bottle generator, more durable, stable, safe, and high pressure resistant.
• High Capacity and Safe First - You could add more material: Citric acid 400g + baking soda 400 + water 600g. The capacity is twice that of an ordinary 2L bottle and half of 4L! An automatic pressure relief valve, when the pressure of the inside steel bottle exceeds 30KG will automatically release pressure. 12V Waterproof solenoid valve，Keep away from the danger of water leakage from the solenoid valve, protect your safety.
• Refine The Bubbles - Our co2 aquarium kit is equipped with the atomizer, refine the bubbles and make them easy to dissolve in water and be absorbed by plants, keeping your aquarium full of vitality. When using this product for the first time, there will be large bubbles in the refiner, which will gradually disappear within 3 days.
• Low Cost - You only need citric acid, baking soda, and water which are available in supermarkets. When the gas in the bottle runs out, you only need to purchase the material again.
• Complete Accessories - steel bottle, Stainless steel pressure reducing....

ZRDR 4L Co2 Generator System with Dual Gauge Display Pressure Gauge,DIY Co2 Generator System Kit, Automatic Pressure Relief Valve Bubble Counter for Plants Aquarium, Stable Output

• 【Professional Factory & Peace of Mind After-Sales】 We are a manufacturer specializing in CO2 generator systems. Our co2 generator system is made of 304 stainless steel, far better than a simple plastic bottle generator, more durable, stable, safe, and high-pressure resistant. We have a professional after-sales group, you can contact us at any time if you have any problems with the products you buy, and we will give you a satisfactory solution.
• 【New upgrade bubble counter】As the water of the co2 generator system bubble counter evaporates quickly, In view of this, we have carried out a new upgrade to the bubbler. The bubble gauge is equipped with a syringe, which can be directly used to inject water (there is a one-way valve inside the generator, only into the water without leakage). And you can also add water during use, no need to close the air outlet, no need to remove the air tube, convenient for your use.
• 【Safety protection】 The zrdr co2 generator system 4l with automatic pressure relief valve, when the pressure in the cylinder exceeds 70KG will automatically release the pressure. A co2 generator system with a 12V waterproof solenoid valve, make y....

ATPEAM Hydraulic Pressure Test Kit Excavator Parts Hydraulic Tester Coupling Hydraulic Pressure Gauge Kit with 11 Couplings for Excavator Construction Machinery 25/40/60 Mpa

• Specification: Include 3 pressure gauge ranges: 0-25Mpa, 0-40Mpa, 0-60Mpa.
• 10 stainless steel test couplings: G 1/4, Z 1/4,G 3/8, G 1/8, M 10*1, M 10*1.25, M 1/8, M14*1.5, 7/16, 9/16..
• Precise: G1/8 quick connector compatible for Caterpillar machines.
• Feature: It can provide reliable pressure measuring results, very easy to connect and use. Stainless steel couplings, anti-rust, leakage-proof and better than those aluminum products on market..
• Complete Set: This is an accurate Excavator Hydraulic Pressure Test Kit. Set include: 3 x pressure gauge, 3 x test hoses, 10 x couplings and 1 x quick release coupling. Portable to carry with aluminum case..
• Wide Application: Test tube connects the gauge for direct reading.
• Wear-resistant tube, impact-resistant with good elasticity.
• Widely used at construction, machinery, shipping, mining, petroleum, chemical industry etc..

Handheld Bidet Sprayer for Toilet Portable Pet Shower Toilet Water Sprayer Seat Bidet Attachment Bathroom Stainless Steel Spray for Personal Hygiene (1.5M Stainless Steel Sprayer Hose)

• 1.5m metal double interlocking stainless steel shower hose.
• standard 0.5 inch metal anti-twist metal cone connector..
• Large diameter, compatible with high-flow shower performance.
• Brass connector-360-degree rotatable brass connector with 1 / 2-inch American standard thread, suitable for all handheld showers in the United States..
• Free Kink-Innovative design makes kink in shower hoses no longer an issue..
• Durable, SUS 304 stainless steel tube with double buckle design and steel wire + EPDM inner tube ensure longer life of shower hose..
• Anti-Air Pressure and Leak-proof-Leak prevention through 400PSI pressure and high temperature EPDM inner tube..

2 Pcs Mini Steel Tube Cutter Tool, Mini Tubing Cutter Pipe Cutter Tube Cutter Tool of Diameter from 1/8 to 1-1/8 Inch (3-28 Mm), Tube Pipe Cutter for Copper Brass Aluminum, Thin Stainless Steel Tube

• ...ube cutter tool fits for use on construction sites, plumbing jobs, HVAC and refrigeration, heating, manufacturing, decorating or even at garage repair shops and so on.
• Specifically designed for use in restricted spaces to make tight cutting jobs significantly easier and more manageable.
• Easy to Operate: cutting thin stainless steel tubing has never been easier.
• Simply rotate the knob to grip tube, revolve tube cutter around the pipe, tighten grip smoothly after each full circle until full cut.
• It's never been this effortless to cut thin stainless steel tube.

Beduan Push to Connect Fitting, 1/2' Tube OD x 1/2' NPT Thread Male Straight Pneumatic Air Fitting (Pack of 5)

• Body Style: Male Straight / Size:1/2” Tube OD x 1/2“ NPT thread Straight push in connect fitting.
• Working Pressure:0-1.0MPa | 0-150psi/Applicable Tube:PU / PA / PE / PVC.
• Working Pressure:1.0Mpa | 145psi.Seal O-ring:NBR.
• Working Temperature:0-60°C | 32～140°F ；Negative Pressure:-100Kpa | -29.5 In Hg.

Beduan Push to Connect Fitting 3/8 Tube OD x 1/4 NPT Thread Male Straight Pneumatic Air Fitting Pack of 10

• Body Style: Male Straight / Size:3/8” Tube OD x 1/4“ NPT thread Straight push in connect fitting.
• Working Pressure:0-1.0MPa | 0-150psi/Applicable Tube:PU / PA / PE / PVC.
• Working Pressure:1.0Mpa | 145psi.Seal O-ring:NBR.
• Working Temperature:0-60°C | 32～140°F ；Negative Pressure:-100Kpa | -29.5 In Hg.

Blackhead Remover Pimple Popper Tool, Double-Ended Hidden Acne Needle, Ultra-Fine Stainless Steel Professional Extraction Tool for Facial Milia, Comedone Zit Acne Whitehead Blemish (Light Green)

• Clean & Hygeian Stainless Steel: Refuse rust, do not hurt the skin. The acne pimple needle blackhead remover is made of 100% stainless steel with an electroplated needle and stainless steel coating design, to allow safe, prevent corrosion and minimize the risk of infections. Our double-ended hidden acne needle blackhead remover can work on all types of skin..
• Double-ended hidden acne needle: Double-ended hidden design, the needle, and the pressure ring can be put into the tube when not in use. Double-headed, dual-function, ultra-fine stainless steel needles < 0.01mm, pointed to pick up pimples, and rounded heads to squeeze pus..
• Non-Slip Grip-Frosted tube body design: An optimum facial is guaranteed by the non-slip handles of the tool. The Double-ended hidden acne needle is a non-slip frosted design, which is very comfortable to touch and hold. These help you to work precisely and to protect your skin from wounds and scars. Tips: We don't suggest using any blackhead remover before the acne matured, and please wipe tools with rubbing alcohol before and after each use..
• Professional Acne Removal Needle: These double-ended hidden acne needle blackhead remover toolsets can help us to remove blackheads, whiteheads, stubborn acne, various, blemishes and zit p....

USA SEALING ZUSA-TF-PTC-526 Nylon Push to Connect Tube Fittings Female Branch Tee Black 1/4 PTC x 1/4 NPT Female

• Pipe Thread Material: Nickel-Plated Brass.

UltraTech Water Hose, Clear, 25 ft, PVC

• Commercial Grade Material, Super Durable: Our garden metal hose is made from heavy duty stainless steel, which is built to withstand much harsher conditions than traditional rubber hose, including pet bites, cacti puncture, dragging through dirt and rocks, and so on. Avoid leakage and burst for LONG TIME use..
• Multi-layer Flexible Inner Tube, Keep Lightweight: Using high quality thickened PVC as the inner tube, it remains significantly light and easy to carry around the yard. No more lugging heavy water hose, it’s perfect thing for the elderly to handle..
• Flexible Interlink Design, No Kink: The stainless steel layer adopts spiral interlink design, which makes it flexible and easier to wind into small coils than regular garden hose which is usually just a large bunch of twisted hose. On the other hand, the radian of the outer tube makes it tangle free. It’s easy to store and keep the garden tidy..
• Upgraded Metal Fitting, Smooth Water Flow: The 7-Series crush resistant aluminum fittings are engineered to withstand extreme force while Inner diameter increased by 60% allows for a good water pressure. It’s well for all wor....

10 Pack Push to Connect Tube Fitting Air Tool Fittings Straight Push Quick Release Connectors Tube Quick Connect Fittings Male Straight 1/4 Tube OD x 1/4 NPT Thread

• Type: Male Straight, Size: 1/4" Tube OD x 1/4" NPT Thread.
• Made of quality plastic and stainless steel for durable use.
• Easy to install and removed, offering good seal property.
• Operating Pressure: 0- 150 PSI/ 0-9.9 kgf/cm2 (0-990kPa).
• Working Temperature: 0-60°C | 32～140°F.
• Package includes 10 pieces tube fittings total.

Jienk 10PCS Pneumatic Male Elbow 3/8' Tube OD x 3/8' NPT Thread Push to Connect Air Fittings,90 Degree Quick Connector for Air Compressor Air Horn Air Bag

• 【Durable】This fitting has a strong PBT housing with POM release button and zinc alloy ferrule. The thread port adopts nickel plated brass material. High pressure resistance, corrosion resistance and a long service life..
• 【Good Sealing Performance】Stainless steel tube gripping claw makes the grip force stronger, not easy to trip or leak. External tightening with a flat wrench or socket wrench..
• 【Push Lock】 Quick connect fittings easy to install and remove, just a simple push to connect the tube. The release ring adopts ellipse design, removed conveniently. 360°rotation, after installation, the tube direction can be changed easily..
• 【Operating Pressure】 0~145 Psi 【Working Temperature】 32～140°F.

Scientific U-430 Stainless Steel Fittings; 0.020\ bore, Cross, ss