INOX DSIX02-32D Cylindrical Floor Mount Door Stop Satin Stainless Steel

  • Sleek, modern design. Made for residential and light commercial use.
  • AISI 304 stainless steel construction with durable rubber tip.
  • Floor mount with anchor, stainless steel fasteners and durable rubber tip.
  • Also available in beautiful Polished Stainless Steel and Oil Rubbed Bronze finishes.
Check Stock

H2o Kayaks Anchor Trolley Kit (Well Nut)

  • 4–pad eyes with 8 stainless steel screws and nuts and 8 rivets..
  • 1–3" Anchor Cleats with 2 stainless steel Screws and 2 stainless steel nuts..
  • 2–stainless steel Anchor Pulleys with nylon sheave..
  • 30 Feet (9 metres)–Braid 6 mm Trolley Line Instruction are included..
Check Stock

YakGear Deluxe Anchor Trolley Kit

  • 4–pad eyes with 8 stainless steel screws and nuts and 8 rivets..
  • 1–3" Anchor Cleats with 2 stainless steel Screws and 2 stainless steel nuts..
  • 2–stainless steel Anchor Pulleys with nylon sheave..
  • 30 Feet (9 metres)–Braid 6 mm Trolley Line Instruction are included..
Check Stock

Ironwood Pacific AnchorLift Anchor Puller for River and Lake Anchoring, Floats up to 80 lbs

  • FLOAT YOUR ANCHOR OR CRAB TRAP TO THE SURFACE - The AnchorLift Anchor Puller easily floats anchors, crab traps, and lobster pots up to 80 lbs..
  • EASY-TO-USE ANCHOR RETRIEVAL SYSTEM - Slide the AnchorLift over the anchor line, tie off to a cleat and let the anchor out by holding the sliding bolt in the up position. When anchored toss the AnchorLift with buoy into the water. To raise your anchor motor your boat forward to float the anchor to the surface..
  • IDEAL FOR ANCHORING IN RIVERS AND LAKES - Use in place of a winch or windlass. Sliding stainless steel bolt grabs line and locks anchor at water's surface. Designed for use with anchor lines 3/8" to 5/8" in diameter..
  • QUALITY CONSTRUCTION - Made from marine grade nylon with stainless steel at all wear points. For extra heavy-duty use, consider our anodized aluminum AnchorLift Pro model. (Link in description below)..
  • MADE IN THE USA - The AnchorLift Anchor Puller and Polyform buoy are made in the USA and backed by a limited lifetime warranty..
Check Stock

Newport Vessels Premium 5lb Mushroom Anchor Kit w/Bag, Rope, Buoy, & Stainless Hardware, Black

  • USE: 5lb PE Coated Cast Iron Mushroom Anchor best used on lakes, bays and ponds with mud bottoms.
  • SIZE: Small 5lb anchor is perfect for kayaks, canoes, jon boats, jet skis, and other small watercraft.
  • INCLUDES: Anchor, Carrying Bag, Stainless Steel Shackle, 30ft nylon rope, floating bouy, and stainless steel carabiner.
  • COMPLETE KIT: Kit includes everything you need to safely drop and retrieve your anchor.an anchor, shackle, rope, rope bouy, carabiner to clip to your boat, and a carrying bag..
  • WHY NEWPORT VESSELS? We stand behind every product we sell with our 2 year warranty and a customer service team you can actually talk to!.
Check Stock

8.5lb Heavy Boat Anchor Kit Fluke Anchor with Anchor Chain and Boat Anchor Rope Set for 15-25 Foot Including Boat Anchors for 18 and 21 Boats Pontoon Deck Fishing and Sail 75FT Rope

  • ALL-IN-ONE KIT: Our heavy-duty boat anchor kit is all inclusive. Set consists of one galvanized steel fluke anchor, 6 ft. of 1/4 inch galvanized steel anchor chain with bow shackles, and 75 ft. if 3/8 inch nylon rope with a stainless steel eyelet..
  • IDEAL FOR 15-24 FT BOATS: Works on various seafloors comfortably as well as various lengths including small 15', 18' and 21'. Our 8.5lb fluke anchor, weighted chain, and rope work on pontoon boats, deck boats, center consoles, sailboats and more..
  • KEEPS YOUR BOAT SECURE: Our fluke style anchors for boats are well-made with high tensile strength, outstanding stability and superior dig. The boat anchor fluke articulates with the weighted chain to help the shank in sand and mud and hold firmly..
  • FRESH & SALTWATER USE: Our anchor set is ideal for both salt and fresh water. The steel fluke boat anchor and chain are galvanized steel for maximum corrosion protection. The 78 feet of rope is nylon with stainless steel eyelets piece..
  • WHY CHOOSE BETTER BOAT PRODUCTS: We are a family owned American business committed to making premium quality products and our customers happiness. We stand behind the quality of our products and will provide you with the best customer service..
Check Stock

Mxeol Claw Anchor 4.4 lb Pontoon Boat Anchors Galvanized with Stainless Steel Chain Shackles 1/4 inch (Silver, 4.4lb)

  • Boat anchor 4.4 pound is made of galvanized carbon steel with 2 meters stainless steel anchor chain 1/4 inch and ss shackles 1/4 inch..
  • Boat anchors kit claw anchor 4.4 lb with 2 sizes options: 4.4lb (2kg), 8lb (3.5kg)..
  • Sea anchor for boat is with ideal sizes. 4.4lb anchor fits 12 to 16 feet boats, 8lb anchor fits 17 to 24 feet boats..
  • Marine anchor fits most bottom types as boat sand anchor or shallow water anchor, etc., holds in a variety of seabed, The claw anchor sets quickly, stows easily on the bow roller..
  • Pontoon boat anchor is all purpose anchor which remains stable even when tide and wind conditions change..
Check Stock

Zigco LLC SpinRX - Tangle Proof Swivel Pulley - Boat Anchor Pulley - Anchor Pulley for Drift Boat - Pulley Block - Made in USA

  • HARD ANODIZED. The SpinRx is hard anodized for better corrosion and wear resistance. Anodizing hardens the surface of the aluminum which makes our product bomb proof. This product is both lightweight and extremely durable..
  • ALL STAINLESS STEEL HARDWARE. The SpinRx incorporates all stainless steel hardware which allows the product to be used in both fresh and salt water environments. The stainless steel hardware combined with the anodized aluminum components prevents corrosion and increases the life of the SpinRx. This product will not rust!.
  • SEALED BALL BEARINGS. The SpinRx contains two sealed roller bearings which allow the anchor to spin independent of the anchor rope. These roller bearings are sealed, keeping out dirt and sand, and require no lubrication over the lifetime of the pulley. These bearings are high quality, stainless steel bearings, and will not rust..
  • MADE IN USA. Our product is proudly designed, manufactured, and hand assembled in the USA. We stand behind our product and are proud to give you a high-quality, American-made product..
Check Stock

Switch Shooting Gun Controller for Nintendo Joy-Con Hunting Games, 1 PCS Switch Gun Hand Grip Accessories Compatible with Nintendo Switch Games (White)

  • ...f the tree trunk or branch. Take it camping and secure your gear that may get blown about by a stiff wind. Hang food to keep animals out. 2 will even hang your hammock!.
  • Each Brush Gripper is powder coated for a durable long lasting finish, Manufactured in the USA with all stainless steel rivets and spring. Comes equipped with 9 ft. of 550 paracord..
  • Want to be farther than 8' from your anchor point, simply add a longer rope. A Light, Durable, and Versatile Boat Anchor..
Check Stock

5/16\ by 5' Stainless Steel 316 Anchor Chain 5/16\ or 8mm by 5 Foot Long with 2 Shackles

  • 316 stainless steel maintains a higher breaking strength than other anchor chain materials in addition to being exceptionally corrosive resistant in marine environments..
  • Our marine 316 grade stainless steel chain is specifically cut for anchor chain. Chain Links are 5/16" (8mm), Length of Chain is 5 Feet before Shackles..
  • 5/16" Anchor Chain break load is 6,200 lbs. Two bow shackle break load is 7,560 lbs. Superior strength and durability compared to other link chain..
  • Two over sized 5/16" shackles with advanced lock ring design provides an easy way to ensure that your shackles pins don't accidentally work themselves loose..
  • Utilizing an anchor lead chain protects your anchor line from chafe caused at the seabed in addition to providing a more secure anchoring experience..
Check Stock

Extreme Max 3006.6575 BoatTector Marine-Grade Stainless Steel Anchor Lead Chain - 3/16" x 4' with Dual 1/4" Shackles, 800 lbs. WLL/3,200 lbs. BS

  • 3/16" x 4' stainless steel anchor lead chain.
  • Working Load Limit: 800 lbs./Breaking Strength: 3,200 lbs..
  • Marine-grade stainless steel construction.
  • Lead chains enhance anchor holding power and limits abrasion between the anchor and anchor line.
Check Stock

Newport Vessels Premium 15lb Mushroom Anchor Kit w/Bag Rope Buoy & Stainless Hardware Black

  • USE: 15lb PE Coated Cast Iron Mushroom Anchor recommended for use on lakes, bays and ponds with mud bottoms.
  • SIZE: 15lb mushroom anchor is great for medium sizes watercraft about 15ft - 20ft, and is perfect for anchoring your boat in areas with a soft bottom....
  • INCLUDES: 15lb Mushroom Anchor, Carrying Bag, Stainless Steel Shackle, 30ft nylon rope, floating bouy, and stainless steel carabiner.
  • COMPLETE KIT: This Kit includes everything you need.mushroom anchor, shackle, rope, bouy, carabiner to clip to your boat, and a carrying bag..
  • WHY NEWPORT VESSELS? We stand behind every product we sell with our 2 year warranty and a customer service team you can actually talk to!.
Check Stock

RANDDER Kayak Pulley Kit,Heavy Duty Kayak Slide Rail Anchor Trolley Kit Pulley Blocks Sheave for Kayak Canoe Boat - 2 Pack

  • 4–pad eyes with 8 stainless steel screws and nuts,8 rivets..
  • 1–3" Anchor Cleats with 2 stainless steel Screws and nuts..
  • cord is not included. Instruction are included..
Check Stock