General Tools 823 Digital Angle Finder Rule, 10-Inch

  • PREVENT WASTE- This digital 10” stainless-steel ruler and angle finder combination tool makes precise, easy and fast measurements.
  • LOCK IT AND REVERSE IT- Digital protractor has lock and reverse angle functions. Place the angle rule where you need to measure your next cut, LOCK it in place with knurled locking nut, make a mark and use your miter saw to make your cut. The angle finder will automatically display the reverse angle.
  • MEASURE 360-DEGREES- Hinge mechanism on the angle rule allows a full range of 0 to 360-degrees to measure inside outside and reverse angles, accuracy +/-0.3 Degrees. Center check notches are on the ruler ends enables exact ruler placement marking. Display has a hold function to freeze movement for accuracy.
  • PICK YOUR ZERO POINT- Woodworking tool can be zeroed at any point in the swing plus the display can be inverted for easy reading.
  • LARGE LCD DISPLAY- Easy to read LCD display eliminates guessing or eyeballing the angle and length with one convenient protractor tool.
  • Power source: "CR2032" Lithium-ion battery (included).
Check Stock

Digital Angle Finder Protractor, Preciva Digital Protractor 7 inch / 400mm Stainless Steel Measuring Ruler with Large LCD Display for Woodworking, Measurement, Construction Angle Measuring Tool

  • 【Large LCD Display & High Precision】 Preciva digital protractor is equipped with a large LCD display for easy reading.
  • 【Locking Function】Convenient locking screw-by pressing the screw, the ruler can be kept at any angle.For maintain its accuracy and read it easily, Preciva angle finder could be locked at any angle..
  • 【2 in 1 Digital Protractor】Digital stainless steel ruler and angle finder combo makes precise measurements.the hinge mechanism on the angle rule allows complete 360-degree measurement of internal and reverse angles.
  • The protractor combines standard and metric scale scales.Relative and absolute angle measurement..
  • 【Durable Rulers & Low Power Consumption】The digital protractor angle gauge & angle finder durable stainless steel body can be used for a long time.
  • HOLD and RESET function, laser engraving scale, clear and accurate, will not fall off.In addition, it also has the advantage of energy saving, it will automatically close after 6 minutes of inactivity..
  • 【Battery Included】Large capacity standby with automatic power-off function ,use a CR2032 button battery to work for more than 2000 hours .Saving power consumption and extending battery life..
Check Stock

GemRed Digital Angle Finder Tool, 2 in 1 Angle Gauge, Stainless Steel 7inch/200mm Digital Protractor for Woodworking/Carpenter/Construction/DIY Tools (Battery Included) …

  • ...large LCD display, read clearly. ☆Also easily operate with only 2 bottons.(The red and white buttons make the function distinction clearer and more convenient.).
  • 【Humanized Detail Design】 ☆Locking Function: For read it easily, GemRed digital protractor could be locked at any angle. ☆Specially treated matte stainless steel ruler body: The ruler body does not reflect light, each Angle can be clear reading ☆Bigger and bolder type of the ruler: Sharper reading..
  • 【Durable & Long Battery Life】 This digital protractor has been adopted high quality stainless steel ensures the durability of the product. Large capacity standby with automatic power-off function can work more than 2000 hours, saving power consumption and extending battery life..
  • 【Note & Waranty 】 Stainless steel edge is sharp, please be cautious while using AND KEEP IT AWAY FROM CHILDREN.*SCRATCHES ON RULERS ARE RESULTED FROM TOUCHING WITH EACH OTHER. IT MAY APPREAR ON BRAND-NEW PRODUCT. We provides high-quality services with a 12-month warranty..
Check Stock

Angle Protractor ,Stainless Steel Angle Ruler Finder 0-180 Degrees ,10 cm Woodworking Ruler, Angle Measure Tool, Angle Finder Ruler, Craftsman Angle Measure Tool

  • 2 in 1 Angle Finder : It is 2-in-1 manual protractor ruler for measuring lengths and angles. Great gift for dads, men and women who work in woodworking, construction, engineering..
  • Durable Angle Ruler: It is stainless steel protractor,prevent rust and corrosion , do not bend or deform easily ,laser etched measurements offer clear reading ..
  • Lightweight and Portable : You can put the angle measure tool in your pockets,the angle finder ruler is clear and accurate for measuring length(0-10 cm)..
  • Adjustable Protractor Arm : The protractor arm can be easily asjusted from the nut, so it helps you draw radial lines, measuring and marking angles..
  • Wide Applications : This angle ruler is a practical measuring tool for school, office, architect, suitable for for engineering, school, office, architect, and drawing who needs to measure data..
Check Stock

Aluminum Miter Saw Protractor, Thinkor 7\ Angle Finder Featuring Precision Laser Engraved Scales for Carpenters, Plumbers and All Building Trades

  • 2 in 1 Digital Protractor: This Digital Protractor features laser-etched metric and imperial measurements on ruler edge,plus accurate digital readout,can measure both angle and length,ideal for use in carpentry, renovation work, or drawing.
  • High Accuracy & Durable Material: Accuracy of this corner angle finder is ±0.2 degree.Durable stainless steel ruler supports measurement between mm and inch,makes it can measure length (0~400 mm/0~7 inch) convenient and accurately.
  • 0-360°Measuring & Locking Function: A hinge mechanism on the miter protractor allows a full 360 degrees to measure inside outside and reverse angles,and a locking screw can hold any angle when use your miter saw to make your cut.The angle finder will automatically display the reverse angle.
  • Zero Setting & Hold Function: Angle woodworking tool can be zeroed at any point in the swing to find relative angle.Display has a hold function to freeze movement for accuracy.Plus the display can be inverted for easy reading.
  • Large LCD Screen & AUTO OFF: The angle finder ruler has a large LCD display to get quick and clear digital readout. Automatically shut down after 5 minutes of inactivity.Powered by coin battery, comes with 2 batteries as gift.
Check Stock

Miter Saw Protractor Angle Finder, 360 Degree Rotation Function, 7.3 inch Construction Protractors for Woodworking and All Building Trades

  • Large LCD Display: This Digital protractor is equipped with a large LCD display for easy reading.
  • Lock and Reverse angle functions: You can hold and keep the reading by pressing the HOLD function button, it also comes with a Reverse Function Button, When you measuring large angle and doing reverse measurement, The display could read up-side-down. Easy to read, laser engraving scale, clear and accurate..
  • Stainless Steel Body: Durable stainless steel body can be used for a long time.
  • use a CR2032 button battery to work for more than 2000 hours (CR2032 Battery included)..
  • Zeroing at Any Angle: Zero-adjust at any angle under the relative measurement angle of a button.
  • the locking screw is used to maintain the measured reading at any time.
  • it will be automatically shut off after 6 minutes of inactivity..
  • Quick and Accurate Reading: The combination of digital stainless steel ruler and angle finder can make accurate measurement.
  • the hinge mechanism on the angle ruler allows a complete 360 degree measurement of internal and reverse angles..
Check Stock

Bosch GTL3 65ft Square Laser Level for Tile and Square Layout

  • ...of the pencil in the saw tooth notch and then move the ruler along the edge of the board to get different parallel lines. In short, you can draw any line you want with this ruler.
  • HIGH QUALITY: The dial of this adjustable woodworkers edge rule is made of hard plastic, both the angle finder and ruler body are made of stainless steel, which is moisture-proof, rust-proof and corrosion-resistant. The laser scale is clear and precise, does not fade, and effectively extends its service life.
  • AFTER-SALES SERVICE: If you have any questions after receiving the goods, please contact us as soon as possible, we will provide you with good after-sales service. If the product is defective, please contact us to return it for you, or you can consult us if you have any questions during use.
Check Stock

Stainless Steel t Square, Incra T Rule, Edge Ruler Woodworking, Compass and Protractor Set, Multi-Function Angle Measure Tool with Wall Hanging Storage Rack(18-INCH)

  • ...ches and 18 circular holes, The spacing of the serrations is 11/112in (approximately equal to 2.49 mm) and that of the round holes is 1in.
  • MATERIAL:The dial of this adjustable woodworkers edge rule is made of hard plastic, both the angle finder and ruler body are made of stainless steel, which is moisture-proof, rust-proof and corrosion-resistant. The laser scale is clear and precise, does not fade, and effectively extends its service life.
  • T-SHAPED DESIGN: this angle measure tool is designed with t-shape, a series of precision-machined index holes and the spring-type, close-tolerance indexing pins engaged with it.
  • The pin snaps into place, so you can make sure that its positioning is accurate.
  • CONVENIENT STORAGE:Each woodworking ruler is equipped with a wall-mounted storage rack, which make it easy to store. Woodworking protractors & ruler is an indispensable tool for every woodworkers and mechanics.
Check Stock

Digital Angle Ruler Yangoutool Stainless Steel Digital Protractor 20inches/ 500mm

  • 【2 in 1 Functions】This Digital Angle Finder can be both as Ruler and Protractor for precise working..
  • 【Resetting & Locking】Goniometer can be zeroed at any point.
  • Strong lock button can be locked at any angle to hold the readout securly..
  • 【Battery & Quality】Pacakge includes one CR2032 coin Battery works more than 2000 hours. Stainless steel ruler and laser etched measurements offer....
  • 【Accuracy & Measuring Range】Allows a full 360° to measure inside, outside and reverse. Accuracy of the protractor is ±0.3 degree..
  • 【100% Satisfaction Gurantee: 】90 DAY MONEY BACK GUARANTEE ensures your satisfaction. If you aren't impressed with the performance of our Digital....
Check Stock

Calculated Industries 7489 AccuMASTER Value Pack – 2-in-1 Digital Angle Gauge plus the Digital 7-Inch Angle Finder Ruler | Accurate Precision Tools for Carpenters, Woodworkers, Fabricators | 2-Pieces

  • VALUE PACK INCLUDES – A precision tools combo of the Digital Angle Finder Ruler and the 2-in-1 Digital Angle Gauge. Perfect for the pro or hobbyist who needs to transfer true level and precise angle settings to their saws.
  • TOOLS USED TOGETHER – the Angle Finder Ruler enables you to determine the angle of your workpiece that you need to match. The Digital Angle Gauge helps you transfer that angle to your saw or other tool so your finished cut installs perfectly.
  • DUAL FUNCTIONALITY – Angle Gauge works as an inclinometer or tilt gauge to set or check relative angles between surfaces, also works as digital level for tight spots with bright backlit Stay glow display, strong magnetic base, dust/water resistant.
  • ANGLE FINDER RULER can be reset to zero at any position for simple relative or differential angle calculations. Large LCD display HOLD lets you freeze a display value. Full-range protractor measures 360° for both inside and outside angles, 7-inch ruler arms.
Check Stock

Digital Angle Finder Ruler, Preciva 7.5inch/200mm Digital Protractor Stainless Steel Angle Ruler with Large LCD Display and Zeroing/Locking/Reverse Functions (CR2032 Battery Included).

  • Stainless Steel Angle Finder Protractor - Digital LCD display for Easy Reading.
  • Angle Measuring Range: 0-360°, High Accuracy ±0.2°, Resolution 0.05°.
  • Reverse Reading & Data Hold Function - Pressing HOLD Button to Hold the Angles Values in Any Times, Operate Conveniently..
  • ZERO Button, Relative and Absolute Angle Measurement - Zeroing Resetting at Any Angle..
  • Multi-functional Design - Combined with Stainless Steel Ruler and Angle Sensor, Measuring Angle and Length..
  • Tips: To Save Power, It Will Automatically Shut Off after 6 Minutes of Inactivity.
  • When the numbers jumps, please replace new battery..
Check Stock

MUSIBO Protractor Angle Finder, Woodworkers Edge Ruler, T Square, T Ruler, Straight Edge inch Ruler,Multi-Function Angle Measure Tool Woodworking Metal Ruler Kit with Wall Hanging Storage Rack(13in)

  • ...of the pencil in the saw tooth notch and then move the ruler along the edge of the board to get different parallel lines. In short, you can draw any line you want with this ruler.
  • HIGH QUALITY: The dial of this adjustable woodworkers edge rule is made of hard plastic, both the angle finder and ruler body are made of stainless steel, which is moisture-proof, rust-proof and corrosion-resistant. The laser scale is clear and precise, does not fade, and effectively extends its service life.
  • AFTER-SALES SERVICE: If you have any questions after receiving the goods, please contact us as soon as possible, we will provide you with good after-sales service. If the product is defective, please contact us to return it for you, or you can consult us if you have any questions during use.
Check Stock

General Tools Digital Angle Finder Ruler #822 - 5\ Stainless Steel Woodworking Protractor Tool with Large LCD Display

  • 【High Accuracy 】This digital angle finder allows a full range 0-360° to measure internal angle,external angle & Contra angle Measuring precision is ±0.5°, resolution is 0.05° .You can switch between degrees and minutes to Improve the measurement accuracy , meet your requirements for different accuracy..
  • 【Multi-functional Angle Finder 】This protractor combine a angle finder, ruler(7 inch/190mm) and level tools( 3 bubble, Horizontal, Vertical & Circular Level), get one and can instead of 4 pcs single function tools, make it become a helpful woodworking tools and equipment in daily use, expecially you are tire of a bulk of tools in your toolbox.
  • 【Data Hold】Pressing hold button to hold the measurement at any angle, it helps the users effectively record the angle values. Lock angle feature helps maintain accuracy ideal for use in woodworking, construction, or drawing..
  • 【Durable Battery】Super endurance enables it to work continuously more than 2000 hours. Digital angle Finder automatic power-off function, save power consumption and extend battery life. Protractor is equipped with a large LED for easy reading..
  • 【Our Service 】Our worry-free 18-month warranty, and friendly customer service . So you can rest assured. There’s no worry to....
Check Stock