Best Stainless Steel Angle Gauge
Drill Angle Gauge, 3Pcs Drill Bits Angle Gauge Set Dirll Sharpener Tools S/S Angle Measuring Gage Drill Bit Angle (60 °, 70 °, 90 °, 110 °, 118 °, 125 °, 135 °, 150 °, 160 °)
- 【Material】: This Angle gauge set is made of high quality stainless steel, high hardness, and durable in use..
- 【Design】: It is a practical Angle gauge set in drill bits Angle measuring and drill sharpener inspection,and comes with a case, convenient for carrying out..
- 【Feature】: Diameter drill front edge of the protractor 50 gauge 118 ° apex angle of twist drills grinding gauge suitable for 118 ° apex diameter of not more than 50mm of grinding twist drills..
- 【Drill Apex Angle】: Check the drill apex angle (60 °, 70 °, 90 °, 110 °, 118 °, 125 °, 135 °, 150 °, 160 °). Cutting tool angle is 60 degrees for a tooth-shaped angle 55 degree angle and metric thread, inch thread inspection, blade and special measuring tools for measuring angles.
- 【Usage】: Suitable For: Angle measurement.
Check StockAngle Gauge Drill Bits, 3Pcs S/S Angle Gauge Measurement Drill Sharpener Tool Set Including Drill Diameter, Drill Bits and General Angle Gauge with Case
- Professional Measurement Tool: This is a practical set of angle gauge set in drill bits angle measuring and drill sharpener inspection.
- Professional and Standard Parameters: 60 Degree cutting tool for the inspection of tooth‑shaped 55 degree angle and metric thread and inch thread, and also it can measure blade angles.
- Comprehensive Angle Range: This set of drill bits gauge has a comprehensive angle range: 60 °, 70 °, 90 °, 110 °, 118 °, 125 °, 135 °, 150 ° and 160 °.
- Suitable Utilization: Diameter drill front edge of the protractor 50 gauge 118 ° angle twist drills grinding gauge is suitable for 118 ° diameter of less than 50mm grinding twist drills.
- Durable for Long-Time Use: Made of high quality stainless steel, this set of angle gauge has high hardness, and it is durable for long-time use.
Check StockNecygoo Weld Gauge Set Stainless Steel 0-60mm Cam Type Gauge and 3.2mm-25.4mm 1/8''-1'' Weld Fillet Gauge with Bag Imperial Metric Measurement Welding Gauge
- ❤WELD GAUGE SET❤ Package Includes 1 x Cam Type Gauge, 1 x Weld Fillet Gauge, 2 x Instructions, 2 x Bags. This Weld Gauge, with Imperial Metric Measurement, is Suitable for Measuring Length, Height, Width and Angle for Welding..
- ❤CAM TYPE GAUGE❤ Linear Measure Range: 0-60mm (0-2 in), Curving Measure Range: 0-20mm (0-1 in), Angle Measure Range: 0-60 Degree..
- ❤WELD FILLET GAUGE❤ Metric Measure Range: 3mm, 4mm, 5mm, 6mm, 8mm 9mm, 10mm, 11mm, 12mm, 14mm, 16mm, 19mm, 22mm and 25mm While Accuracy is Less Than +/- 0.5mm. Imperial Measure Range: 1/8” (3.2mm), 3/16” (4.8mm), 1/4” (6.4mm), 5/16” (7.9mm), 3/8” (9.5mm), 7/16” (11.1mm), 1/12” (12.7mm), 5/8” (15.9mm), 3/4” (19.1mm), 7/8” (22.2mm) and 1” (25.4mm) While Accuracy is Less Than +/- 1/50” ..
- ❤STAINLESS STEEL GAUGE❤ Both Gauge Are Made of Stainless Steel, Which is Very Durable and Won’t Be Bended Easily. With Smooth Surface and Clear Scale (Please Be Careful for The Sharp Edge When Use)..
- ❤PACKAGE❤ Package Includes A Cam Type Gauge, A Weld Fillet Gauge and Manual. If You Have Any Question, Please Contact Us..
Check StockBOSCH CO2143 1/4 In. x 4 In. Cobalt Drill Bit
- Withstands high-temperature applications for extended periods of time (up to 1,100 degreeF).
- Rigid, thick web design adds stability to bit in tough applications.
- Surface hardened to penetrate tough abrasive materials, Cuts through light gauge metal, high carbon steel, aluminum and alloy steel, cast iron and stainless steel.
- Available in jobber length, full shank, Drill Point Angle is 135 degrees, Surface Coating is uncoated (bright finish), Bit type is Twist.
- Best used for drilling into light-gauge metal, high-carbon steel, aluminum and ally steel, cast iron, stainless steel and titanium.
Check StockDuroSTEEL Janus 8'x8' Commercial 1000 Series Metal Roll Up Door & Hardware Direct
- ...Polyester paint coatings, which are corrosion resistant. Wash coat over primer interior side. 40-year film integrity warranty — up to 25-year chalk and fade. Flexible nylon wear strips..
- Bottom Bar: 24 gauge acrylic-coated galvalumed roll formed steel. 2” x 1 ½” galvanized angle. Bulb astragal (Durometer 75). Stainless steel bolts..
- Axel/Torque Tube: 1” O.D. steel axle, 12-gauge. Oil tempered torsion springs conforming to ASTM A229. 18-gauge, 9 ½” diameter galvanized drum. Low friction, grease-filled steel ball bearings staked in each drum. 26 gauge spiral torque tubing that houses axle assembly..
- Guide: 16 gauge galvanized. Vinyl guide wear strip. Bolt on head stop ¼” thick steel. 2 ¼” guide dept. Pre-punched for lock. Universal jamb mount. Hardware: Bottom bar mounted 12 gauge slide locks - 2 per door. Bottom bar mounted 16 gauge step plate - 2 per door. 12 gauge door mounting brackets. Ratchet tensioner device..
Check StockDuroSTEEL Janus 10'x9' Commercial 1000 Series Metal Roll Up Door & Hardware Direct
- ...Polyester paint coatings, which are corrosion resistant. Wash coat over primer interior side. 40-year film integrity warranty — up to 25-year chalk and fade. Flexible nylon wear strips..
- Bottom Bar: 24 gauge acrylic-coated galvalumed roll formed steel. 2” x 1 ½” galvanized angle. Bulb astragal (Durometer 75). Stainless steel bolts..
- Axel/Torque Tube: 1” O.D. steel axle, 12-gauge. Oil tempered torsion springs conforming to ASTM A229. 18-gauge, 9 ½” diameter galvanized drum. Low friction, grease-filled steel ball bearings staked in each drum. 26 gauge spiral torque tubing that houses axle assembly..
- Guide: 16 gauge galvanized. Vinyl guide wear strip. Bolt on head stop ¼” thick steel. 2 ¼” guide dept. Pre-punched for lock. Universal jamb mount. Hardware: Bottom bar mounted 12 gauge slide locks - 2 per door. Bottom bar mounted 16 gauge step plate - 2 per door. 12 gauge door mounting brackets. Ratchet tensioner device..
Check StockDuroSTEEL Janus 10'x12'Commercial 1000 Series Metal Roll Up Door & Hardware Direct
- ...Polyester paint coatings, which are corrosion resistant. Wash coat over primer interior side. 40-year film integrity warranty — up to 25-year chalk and fade. Flexible nylon wear strips..
- Bottom Bar: 24 gauge acrylic-coated galvalumed roll formed steel. 2” x 1 ½” galvanized angle. Bulb astragal (Durometer 75). Stainless steel bolts..
- Axel/Torque Tube: 1” O.D. steel axle, 12-gauge. Oil tempered torsion springs conforming to ASTM A229. 18-gauge, 9 ½” diameter galvanized drum. Low friction, grease-filled steel ball bearings staked in each drum. 26 gauge spiral torque tubing that houses axle assembly..
- Guide: 16 gauge galvanized. Vinyl guide wear strip. Bolt on head stop ¼” thick steel. 2 ¼” guide dept. Pre-punched for lock. Universal jamb mount. Hardware: Bottom bar mounted 12 gauge slide locks - 2 per door. Bottom bar mounted 16 gauge step plate - 2 per door. 12 gauge door mounting brackets. Ratchet tensioner device..
Check StockDuroSTEEL Janus 8'x10' Insulated Commercial 1000i Series Metal Roll Up Door & Hardware Direct
- ...Polyester paint coatings, which are corrosion resistant. Wash coat over primer interior side. 40-year film integrity warranty — up to 25-year chalk and fade. Flexible nylon wear strips..
- Bottom Bar: 24 gauge acrylic-coated galvalumed roll formed steel. 2” x 1 ½” galvanized angle. Bulb astragal (Durometer 75). Stainless steel bolts..
- Axel/Torque Tube: 1” O.D. steel axle, 12-gauge. Oil tempered torsion springs conforming to ASTM A229. 18-gauge, 9 ½” diameter galvanized drum. Low friction, grease-filled steel ball bearings staked in each drum. 26 gauge spiral torque tubing that houses axle assembly..
- Guide: 16 gauge galvanized. Vinyl guide wear strip. Bolt on head stop ¼” thick steel. 2 ¼” guide dept. Pre-punched for lock. Universal jamb mount. Hardware: Bottom bar mounted 12 gauge slide locks - 2 per door. Bottom bar mounted 16 gauge step plate - 2 per door. 12 gauge door mounting brackets. Ratchet tensioner device..
Check StockChgImposs 12″ Adjustable Sliding Combination Square Ruler & Protractor Level Measure Measuring Set, Inch/Metric
- 12-Inch stainless steel ruler, protractor head, center head, square heads, for all your leveling needs.
- Direct reading double 180 degree protractor scale.
- Professional Inch/Metric tool, adjustable straight edge & depth gauge.
- Straight edge with self-storing scribe, horizontal level, plumb level, angle measurer.
- Be made of high stainless steel materials and will never rust or corrode.
Check StockMorse Cutting Tools 31540 Adjustable Round Fractional Split Dies, High-Speed Steel, Bright Finish, 1-1/2\ Outside Diameter, 1/2\ Thick, 5/16\
- Twist Drill Angle Gauge Grinding Drill Bits Diameter Center Gauge Sharping Tools.
- Drill bit angle gauge for measuring drill bit 118 degree.
- Made of stainless steel, not easy to rust and bend.
Check StockAluminum Stair Tread Template Tool, Stairs Treads Gauge 360°Rotating Design Adjustable Length and Angle Layout Tool Cutting Guide Tools for StairTreads, Risers, Drywall and Partition
- Raw Material: The scale plates of the stair tread template tool are made of premium stainless steel which is durable, anti-corrosion, and anti-rust. Tie rods are made of aluminum alloy and the surface is treated by anodizing to prevent discoloration in humid or high-temperature environments..
- Package Include:2 x Stair tread plate with scale.
- Wide Application: The stair tread template tool can measure the length and angle of stairs. The stair gauge can meet all your needs when installing stairs, perfect for laying out wooden stair treads, wooden floors, closets,s and windowsills. Professional and easy-to-use tools for woodworking DIY or woodworking construction workers..
- Easy Installation: The stair tread gauge is easy to install and easy to remove, no need to use other tools, just fix screws and knobs in the corresponding screw holes. Adjusting the tightness of the knobs is the switch to extend the length and angle of the stair gauge, easy to operate..
- Flexible Angle: The scale plates of the stair gig can be rotated 360° to measure the rotation angle of the stairs, y....
Check StockPantin Propane Gas 13 Cast Iron Chamber Gas Compact Single Burner Commercial Restaurant Wok Range - 128,000 BTU
- Liquid propane gas 13" single chamber compact wok range is suitable for cooking stir fry, seafood, soup or boiling noodles..
- 16 Tips Jet Burner with Central Pilot and Cover, Total BTU 128,000.
- 16 Gauge one piece stainless steel stove top extended to front and two sides with forming technology..
- Stainless steel and heavy gauge reinforced steel angle chassis. Overall dimensions: 27"W X 30"D X 48"H.
- This item is including a liftgate delivery and curbside delivery only, No inside delivery..
Check StockFreeman SSAF1534-25 15-Gauge 2-1/2 Glue Collated Stainless Steel Angle Finish Nails 1000 count
- Ideal for door and window casing, moulding, trim, chair rails, cabinetry and other fine finish applications.
- Compatible with most 15-gauge angle finish nailers capable of firing 34 degree 2-1/2" glue collated finish nails, such as the Freeman PFN1564.
- Solid stainless steel for strength and durability.
- 304 stainless steel angle finish nails won't corrode and stain natural finish wood or pressure treated lumber.
Check Stock