Best Stainless Steel Bracket
SE Sport 200 Hydrofoil, fits 8 hp - 40 hp engines
- Base Material: It is made of stamped stainless steel, base is made of white high quality plastic. Stainless steel construction is non-corrosive for saltwater use, making its life service longer..
- High Quality: Heavy duty with reinforced welded frame and stamped stainless components. Wide track body for added stability. Suitable for motors up to 15 HP with a maximium weight of up to 80LB..
- Easy To Set Up: It is very easy to set up, just requires little mounting space. Install the motor bracket to the boat bracket buckle, tighten the nuts, and the installation is complete..
- Usage: If you order our boat and want to install a motor, then you need to order this bracket for installing the motor(motor not included) . Our motor brackets are durable and stable to support the motor..
- Tips: Please note that this bracket only works with our brand of boats, not other brands. It is recommended that GZKYYLEGS boats be purchased together with the motor bracket. BOAT ASIN: B09FLKVMWF.
Check StockYaeMarine 4-Pack Stainless Steel Fishing Rod Holder Slide Mount Removable Rod Holders for Marine Boat Yacht
- 【Material】: 316 stainless steel, Mirror Polished Finished,.
- 【Feature】: Vertical mount removable rod holder can easily be removed when not in use, 8mm diameter drain hole at base of rod holder to drain any captured water. Rubber insert to protect your fishing rod from any wear against the stainless surface..
- 【Easy To Install】: Vertical mount removable rod holder can easily be removed. Rod holder protrudes at a 30 degree angle when mounted. mounting bracket requires 4 countersunk screws (screws not included)..
- 【Save Space】: When rod holder is removed, only the low profile mounting bracket will remain mounted, Ideal for small tinnies when space is limited, or boats that aren't constantly used for fishing..
- 【Package Included】: 4 x 316 stainless steel rod holder, 4 x 316 stainless steel mounting bracket, 4 x Rubber insert (fitted).
Check Stock
JunSun Recessed Toilet Paper Holder Brushed Nickel Stainless Steel Toilet Paper Roll Holder Tissue Holder Modern Tissue Roll Holder 6 X 6 Square Jumbo Mega Roll Holder Rear Mounting Bracket Included
- 100% STAINLESS STEEL CONSTRUCTION-Compared with other similar products which is constructed of zinc and aluminum with plastic brackets &bar, our product is 100% 304 stainless steel, including the main body, brackets and bar, even the rear mounting bracket. Stainless steel construction provides long-lasting durability, also it can protect against corrosion & rust..
- BRUSHED NICKEL FINISH-Hand brushed nickel finish, including the main body, brackets and bar, even the rear mounting bracket. Ensuring every detail of the product is perfect, building to resist daily scratches, corrosion and tarnishing..
- MULTI-USE - It can be mounted to a hollow wooden wall or wooden bathroom cabinet (hardware & rear mounting bracket included), also can be mounted to a solid cement wall (hardware included)..
- EASY INSTALLATION - Complete with all the mounting accessories needed, including premium stainless steel screws, top quality anchors and rear mounting bracket..
- DIMENSIONS- 6.1" x 6.1" x 3.58" inches, requires a 5-inch by 5-inch hole in the wall..
Check StockQuick Release Adjustable Aluminum Fire Extinguisher Holder Mount Bracket Compatible with for Jeep Wrangler UTV Polaris RZR Ranger Camper Van with Pillar
- Kidde 420119 metal strap bracket is for use on Kidde 2.5 pound fire extinguishers.
- Steel bracket is easily assembled and has an enamel finish.
- Non-corrosive stainless steel straps, bracket is ideal for rugged applications.
- Stainless steel strap holds unit firmly in place.
Check Stock
Stainless Steel Single Basin Kitchen Sink with Stand, Home Simple Laundry Sink With Faucet, Ready Practical Freestanding Vanity Multipurpose Sink, Commercial Sink for Laundry / Backyard / Garage
- 1. Dining sink: stainless steel outdoor sink is made of stainless steel, durable, surface drawing process, anti-rust and corrosion-resistant, no stains, anti-overflow, R-angle design, not easy to remain water, easy to clean and long-lasting use.
- 2. Kitchen sink: This stainless steel sink has multiple size options, 52*38cm, 58*43cm, 68*44cm, you can put a lot of dishes and clothes, making it more comfortable and efficient for you to wash, it is your food preparation good assistant.
- 3. Detail design: Our stainless steel water pipe is equipped with a filter basket, which can filter debris, drains quickly, and is not easy to block. The S-bend water pipe design prevents the backflow of odors and effectively prevents odors in the kitchen and bathroom.
- 4. Sturdy and stable: The sink bracket is made of stainless steel, and the sink bracket is durable and not deformed. The feet of the sink bracket can be adjusted at will to keep the overall balance and stability of the sink. 360° swivel faucet for easy use.
- 5. Wide range of uses: stainless steel sink is equipped with anti-condensation coating and EV sound insulation pad at the bottom to eliminate water flow noise and isolate condensation water, ideal for outdoor and indoor use, suitable for hotels, restaurants, ....
Check Stock12Pcs 2.5” Stainless Steel Angle Bracket Wide Metal Brackets for Brace Heavy Duty Corner Bracket Corner Brace 90 Degree Joining Brace Bracket for Wooden Frame Bed Furniture Bookshelf
- 2.5INCH METAL ANGLE BRACKETS FOR WOOD: 38MM wide design provides great load capacity and is more durable than most stainless steel corner brackets on....
- HEAVY DUTY CORNER BRACKET: The internal corner brackets are made of high quality stainless steel with a black finish that is rust and corrosion free....
- 90 DEGREE CORNER BRACE SUPPORT: Metal corner brace has smooth surface and round edges for an elegant, scratch-resistant appearance, which won’t....
- RIGHT ANGLE BRACKET SIZE: Overall Size: 2.5”x2.5”x1.5”(LxWxH).
- The 2.5inch angle bracket has 4 holes with countersunk screw....
- WIDE USED IN HOME DIY PROJECT OR OUTDOOR: Stainless steel corner brace bracket is essential brackets hardware, widely used for stabilize and reinforce....
Check Stock
Surgicalonline Orthodontic Bracket Removing Pliers Stainless Steel Dental Braces Removal Tools Bracket Gripper Plier
- ...KET REMOVING ORTHODONTIC PLIERS: The SurgicalOnline Bracket Removal Pliers are a handheld instrument designed to quickly and efficiently remove brackets. Cut time in half and get the braces off faster than ever with this handy instrument that is suitable for steel ceramic and plastic brackets of all types..
- DURABLE STAINLESS STEEL CONSTRUCTION: The Premium Quality Stainless Steel composition of these Bracket Removing Pliers offers a long life of strong performance, as they are built to last. These pliers will not bend or break on you. Made with anti-corrosion properties..
- FULLY REUSABLE + AUTOCLAVABLE: A hygienic and valuable choice, these orthodontic pliers can be fully autoclaved without fear, for long term use without degradation..
- DESIGNED FOR PRECISE + EASY OPERATION: The Bracket Removing Ortho Pliers are designed for easy accessibility, with a comfortable grip and working tip to engage the bracket under the wings. They offer smooth maneuvering, giving you more control for precise operation. They will help you to remove braces quickly and efficiently. These features make this product a valuable addition to your inventory..
- SAFE AND VALUABLE INSTRUMENT: PASSES THE NATIONAL AND INTERNATIONAL QUALITY AND SAFETY STANDARDS: SurgicalOnline production ....
Check StockUngSung Stainless Steel Antenna Mount Bracket with U Bolts for Ham UHF VHF CB Cellular Trucker Antenna Accepted SO-239 3/8-24 Stud N Type Connector Antenna Mount to Mast Clamp
- Antenna mount Center of hole size :16mm ( 0.63 inches).
- Antenna Mount Bracket accept 5/8-inch connectors such as the UHF Female (SO-239) type or N Female type or 3/8-24 Stud.
- Mount bracket hardware made from high quality stainless steel strong enough for corrosion resistance in harsh weather conditions..
- Stainless Steel Hardware provided U type Bolts, Lock Washers and Nuts..
- Strong Stainless Steel construction of L type Bracket: 1.5 mm thick.
Check StockHongso Char Griller Grill Replacement Parts, Burners, Hanger Brackets, Heat Plates Replacement for Char Griller 5050, 5650, 3001, 3008, 3030, 4000, 5252, 5072 Gas Grill
- Fits Chargriller 3001, Chargriller 3008, Chargriller 3030, Chargriller 4000, Chargriller 5050.
- Fits King Griller 3008, King Griller 5252.
- 3 Stainless steel Burner Dimensions: 20 1/8" x 1".
- 3 Porcelain Steel Heat Tent Dimensions: 18 15/16" x 3 7/8".
- Package include 3pcs Stainless Steel Burner, 3pcs Porcelain Steel Heat Plate, Mounting Screws, 2 Different Brackets (one bracket is to hold the burner tube), Bracket Material: Stainless Steel.
- Make sure you measure the size of your original parts and compare with ours BEFORE you order.
Check Stock
28PCS Black L Corner Brackets for Wood + 168PCS Screws, Stainless Steel Corner Braces Metal Small L Brackets for Shelves, Heavy Duty Angle Brackets for Raised Bed Table Leg Bed Frame Cabinet
- ✔️【 What You Get 】- 28PCS Stainless Steel L Brackets + 168PCS Screws, meet your daily requirements to make furniture parts stay firm. Save your time and money on additional purchases..
- ✔️【 Sturdy & Durable L Bracket 】- Made of 304 stainless steel with black smooth coated surface, beautiful and rust resistant. 90° bracket + Indentation made in the middle for enhancing the strength + Countersunk screw hole design for protecting your hands from injury..
- ✔️【 Enjoy the Fun of DIY 】- Super easy to install. Carooyac right angle brackets is equipped with about 168 matching screws. Just use screwdriver or electric drill to fix the bracket..
- ✔️【Wide Applications】- Ideal for quickly and easily repairing wood furniture. This stainless steel l bracket can be widely used to fix any kinds of wooden furniture, such as shelves,chair, table, bed, window frame, etc..
- ✔️【 100% Customer Satisfaction】 - The small angle bracket can be exchanged or refunded if you don't satisfy with it or if the number is not enough. We offer hassle-free returns so each cu....
Check Stock
LOMETY Stainless Steel Flag Pole Holder Heavy Duty Multi-Position Flag Pole Bracket Multi-Angle Adjustment Wall mounting Bracket for 1 inch Flag Pole(Silver)
- ...s design, which makes the flag pole can be set from 0 - 180° range, it adopts gear wheel （ultra strong） and has 12 adjustable angles to perfectly show your flag. You can adjust the flagpole angle as you wish at any time. It is much easier to adjust the angle with the thumb screw..
- ✅【Upgraded T304 Heavy Duty Stainless Steel】This flag pole bracket is made of more higher strength 304 stainless steel which is waterproof, anti-ice, rust-proof, anti-corrosion and durable, along with superior resistance to oxidation. More durable than aluminum, plastic materials or other materials in the market. It could be lasted for lifetime, Save the trouble to change the new bracket again. Value for your buy!.
- ✅【Patent design & Install on flat or round surface】 People may want to install the flag holder on different objects. To meet the different needs, evertoco designs this flag pole mount, which can be installed on a flat wall with screws, also apply to curved pillars using straps, such as trunks, poles, etc..
- ✅【Easy to Install】The flag pole bracket is suitable for standard 1-inch flagpoles. Traditional installation method: The flag holder bracket for house comes with all the installation hardware, just line up the holes, drill, and screw it in. I....
Check StockGas Grill Universal Rotisserie Non-Motor Side Bracket MB-2B
- Strong 13 Watt Gear Reduction Rotisserie Motor With Integral Backlash Prevention Geartrain Overshadows Weak 4 and 9 Watt Motors Seen On Virtually All....
- Heavy Duty Solid, Single Piece 1/2'' Hexagon Rust Resistant Stainless Rotisserie Spit Rod For Heavier Load Usage. Solid, Single Piece Design Provides....
- Heavy Gauge 4 Prong 304 Stainless Steel Rotisserie Spit Fork Set Included For Versatile Operation For A Variety Of Load Shapes & Sizes. Forks Feature....
- Included Fully Adjustable Stainless Steel Counter Balance System For Fine Adjustments During Use with Unbalanced Loads. Ride Bushing Allows for....
- Universal 304 stainless 3pc bracket set designed to fit most gas,charcoal, and custom grills. Bracket schematics displayed for fitment details.....
Check Stock
evertoco Heavy Duty T304 Stainless Steel Flag Pole Bracket - 180° Adjustable Flag Pole Holder for House with Two Installation Methods, Flag Holder for 1\ Inner Diameter Pole, Wind Resistant &Rust Free
- ...s design, which makes the flag pole can be set from 0 - 180° range, it adopts gear wheel （ultra strong） and has 12 adjustable angles to perfectly show your flag. You can adjust the flagpole angle as you wish at any time. It is much easier to adjust the angle with the thumb screw..
- ✅【Upgraded T304 Heavy Duty Stainless Steel】This flag pole bracket is made of more higher strength 304 stainless steel which is waterproof, anti-ice, rust-proof, anti-corrosion and durable, along with superior resistance to oxidation. More durable than aluminum, plastic materials or other materials in the market. It could be lasted for lifetime, Save the trouble to change the new bracket again. Value for your buy!.
- ✅【Patent design & Install on flat or round surface】 People may want to install the flag holder on different objects. To meet the different needs, evertoco designs this flag pole mount, which can be installed on a flat wall with screws, also apply to curved pillars using straps, such as trunks, poles, etc..
- ✅【Easy to Install】The flag pole bracket is suitable for standard 1-inch flagpoles. Traditional installation method: The flag holder bracket for house comes with all the installation hardware, just line up the holes, drill, and screw it in. I....
Check Stock
